The Race Tech SPLS 14 Shock Lowering Spacer Kit is designed for 14 mm shock shafts and installs between the seal head and compression base plate. This suspension component helps lower the motorcycle by approximately 1 to 4 inches, allowing riders to improve seat height and ground reach while maintaining a practical shock setup. The kit is intended for compatible motorcycle shock applications and should be installed by a qualified technician familiar with suspension service.
Fitment: For shocks using a 14 mm shock shaft without a top-out spring. Verify shock design and application compatibility before installation. The kit includes spacers in multiple thicknesses from approximately 0.08 to 0.59 inches, providing adjustment options for the desired lowering amount. Always confirm the manufacturer’s service requirements and available suspension travel before modifying shock height.
Brand: Race Tech
Manufacturer Part Number: SPLS 14
Vendor Part Number: SPLS 14
Application: 14 mm shock shafts
Adjustment Range: Approximately 1 to 4 inches of lowering
Important: Not compatible with shocks equipped with a top-out spring.
Features:
- Fitment: Designed for shocks with 14 mm shock shafts
- Lowering Range: Lowers the motorcycle approximately 1 to 4 inches
- Installation: Installs between the seal head and compression base plate on the shock shaft
- Spacer Selection: Includes spacers from approximately 0.08 to 0.59 inches thick
- Compatibility: Not intended for shocks with a top-out spring
- Brand: Race Tech
- Part Number: SPLS 14