EBC Carbon Fiber Clutch Plate Set CKF5594 15-5594F

The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.

The EBC CKF5594 carbon fiber clutch plate set is designed for select KTM motorcycles and provides a replacement clutch plate solution for demanding riding conditions. The friction plates feature a carbon fiber-impregnated clutch liner that is designed to offer improved wear characteristics, increased grip and enhanced clutch feel compared with OEM-style cork-based friction plates.

These plates provide more heat tolerance and reduced clutch slippage compared with OEM-style friction plates, while supporting longer wear in tough riding conditions. For best results when replacing clutch plates, the product information recommends using heavy-duty springs, as stock springs can become heat fatigued after hard riding. Manufacturer part number: CKF5594. Vendor part number: 15-5594F.

Fitment includes the 2012, 2013 and 2014 KTM 65 SXS; the 1998, 1999 and 2000 KTM 60 SX; and the 1998, 1999, 2000 and 2001 KTM 65 SX. Confirm the model year and motorcycle application before installation.

Features:

• Carbon fiber-impregnated friction plates
• More heat tolerance than OEM-style friction plates
• Reduced clutch slippage compared with OEM-style friction plates
• Longer wear in tough riding conditions
• Fits 2012–2014 KTM 65 SXS
• Fits 1998–2000 KTM 60 SX
• Fits 1998–2001 KTM 65 SX

Fitment:
1998 KTM 60 Sx
1998 KTM 65 SX
1999 KTM 60 Sx
1999 KTM 65 SX
2000 KTM 60 Sx
2000 KTM 65 SX
2001 KTM 65 SX
2002 KTM 65 SX
2003 KTM 65 SX
2004 KTM 65 SX
2005 KTM 65 SX
2006 KTM 65 SX
2007 KTM 65 SX
2008 KTM 65 SX
2008 KTM 65 XC
2009 KTM 65 SX
2009 KTM 65 XC
2010 KTM 65 SX
2011 KTM 65 SX
2012 KTM 65 SX
2012 KTM 65 SXS
2013 KTM 65 SX
2013 KTM 65 SXS
2014 KTM 65 SX
2014 KTM 65 SXS
2015 KTM 65 SX
2016 KTM 65 SX