EBC 65 SXS/SX DRCF241 Carbon Fiber Clutch Complete Set

The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.

The EBC DRCF241 Carbon Fiber Clutch Complete Set is a pre-measured clutch assembly designed to help return the motorcycle to its exact stock stack height when replacing worn clutch components. The set includes carbon fiber-impregnated heavy-duty clutch friction plates, pin-planished steel plates and upgraded clutch springs. The friction material is designed to provide improved wear characteristics, grip and clutch feel compared with standard cork-based plates.

The included springs are 15% tougher than stock springs and are shot peened, heat treated and tempered for heavy-duty use. The increased spring strength may require slightly higher lever pressure while providing added clutch feel and control. The steel plates are pin planished to support improved lubrication distribution, while the complete pre-measured assembly helps reduce the risk of clutch slippage that may occur when replacing plates without restoring the original stack height.

This EBC clutch kit fits 2009–2014 KTM 65 SX models and 2012–2015 KTM 65 SXS models. The manufacturer part number is DRCF241, and the vendor part number is 15-1941F.

Features:

• Carbon fiber clutch friction plates: Heavy-duty friction liner material designed for improved wear, grip and clutch feel.
• Pre-measured clutch assembly: Full set of friction plates measured as an assembly for the motorcycle to help restore stock stack height.
• Pin-planished steel plates: Full set of steel plates designed for improved lubrication distribution.
• Heavy-duty clutch springs: Shot peened, heat treated and tempered carbon steel springs rated as 15% tougher than stock springs.
• KTM fitment: Fits 2009–2014 KTM 65 SX and 2012–2015 KTM 65 SXS models.
• Part numbers: Manufacturer part number DRCF241; vendor part number 15-1941F.

Fitment:
2009 KTM 65 SX
2009 KTM 65 XC
2010 KTM 65 SX
2011 KTM 65 SX
2012 KTM 65 SX
2012 KTM 65 SXS
2013 KTM 65 SX
2013 KTM 65 SXS
2014 KTM 65 SX
2014 KTM 65 SXS
2015 KTM 65 SX
2015 KTM 65 SXS
2016 KTM 65 SX