EBC 230 DRCF230 Carbon Fiber Clutch Complete Set

The trick is to build a pre measured assembly to re-set your bike to the exact stock stack height, just fitting new plates might not bring your bike right back up to spec and slippage could still occur. PLUS the springs in the EBC DRC and DRCF kits are 15% tougher than stock, you will quickly get used to the slight increase in lever pressure and from there on, your clutch will have more feel and control, it will never suffer slippage again, it will last longer and give you better drive. The DRC kits from EBC are world famous and literally millions have been sold but the new DRCF kit even raises the bar again. Where the early DRC kits feature cork based clutch plates exactly the same as the original clutch in your bike when it was new, the DRCF kits include a HEAVY DUTY clutch liner impregnated with carbon fibers that wears better, grips better and feels better. If you don’t want to step up to the full cost of the DRCF complete kit, you can shortly buy the CKF plate kit separately and upgrade just the plates in your bike….don’t forget though ALWAYS use heavy duty springs. Stock springs get heat fatigued and are not up to the job after a few hard motos.

The EBC DRCF230 Carbon Fiber Clutch Complete Set is designed for select Yamaha TT-R125 and TT-R125E models. The kit includes a full set of friction plates precision measured as an assembly, pin-planished steel plates, and shot-peened, heat-treated, tempered carbon steel clutch springs. Its carbon fiber-impregnated heavy-duty clutch liner is designed to provide improved wear, grip, feel, and drive performance compared with conventional cork-based clutch plates.

The included clutch springs are 15% tougher than stock springs, helping provide increased clutch control and resistance to slippage. The pre-measured assembly is intended to help reset the motorcycle to its exact stock stack height when installed correctly. This clutch set fits 2000–2003 Yamaha TT-R125 models and 2003–2008 Yamaha TT-R125E models, including the 2003 TT-R125E.

Manufacturer part number: DRCF230. Vendor part number: 15-19230F. Brand: EBC.

Features:

• Full set of carbon fiber-impregnated friction plates precision measured as an assembly for the motorcycle
• Full set of pin-planished steel plates for improved lubricant distribution
• Shot-peened, heat-treated, and tempered carbon steel clutch springs
• Clutch springs are 15% tougher than stock springs
• Fits 2000–2003 Yamaha TT-R125 models
• Fits 2003–2008 Yamaha TT-R125E models

Fitment:
2000 Yamaha TT-R125
2000 Yamaha TT-R125L
2001 Yamaha TT-R125
2001 Yamaha TT-R125L
2002 Yamaha TT-R125
2002 Yamaha TT-R125L
2003 Yamaha TT-R125
2003 Yamaha TT-R125E
2003 Yamaha TT-R125L
2003 Yamaha TT-R125LE
2004 Yamaha TT-R125E
2004 Yamaha TT-R125L
2004 Yamaha TT-R125LE
2005 Yamaha TT-R125E
2005 Yamaha TT-R125L
2005 Yamaha TT-R125LE
2006 Yamaha TT-R125E
2006 Yamaha TT-R125L
2006 Yamaha TT-R125LE
2007 Yamaha TT-R125E
2007 Yamaha TT-R125L
2007 Yamaha TT-R125LE
2008 Yamaha TT-R125E
2008 Yamaha TT-R125L
2008 Yamaha TT-R125LE
2009 Yamaha TT-R125E
2009 Yamaha TT-R125LE
2011 Yamaha TT-R125LE
2012 Yamaha TT-R125LE
2013 Yamaha TT-R125LE
2014 Yamaha TT-R125LE
2015 Yamaha TT-R125LE