{"title":"Tubliss","description":null,"products":[{"product_id":"tubliss-gen-2-0-21-inch-inner-bladder-system-kit-tu21","title":"Tubliss Gen 2.0 21-Inch Inner Bladder System Kit, TU21","description":"Inner Bladder - Gen 2.0 System - Kit - 21\"\n\u003cp\u003eThe Tubliss Gen 2.0 21-inch Inner Bladder System Kit is designed for off-road motorcycles requiring enhanced rim protection, improved traction, and reliable tubeless tire performance. Manufactured by Tubliss, this TU21 system replaces a conventional inner tube with a high-pressure inner bladder that acts as a 360-degree rim lock. The design seals the tire around the full circumference of the rim while helping stabilize the tire sidewall for improved impact absorption.\u003c\/p\u003e\u003cp\u003eWith up to 100 PSI of protective pressure at the rim, the Tubliss Gen 2.0 system helps reduce the risk of rim damage while allowing riders to operate the tire at very low pressures when conditions require additional traction. The dual-air-chamber design supports low-pressure riding, a plusher ride, and increased tire contact with the terrain. It also helps eliminate pinch flats associated with conventional tubes and can contribute to longer tire life when properly installed and maintained.\u003c\/p\u003e\u003cp\u003eBecause the system uses a tubeless tire configuration, punctures can be repaired quickly with standard tubeless tire plugs, often without removing the wheel. The Tubliss TU21 kit includes the Gen 2.0 inner bladder, installation guide, rim tape and plug, rim lock, rim sticker, and installation poster. This kit is intended for off-road use only and should be installed and maintained according to the manufacturer’s instructions. Verify that your motorcycle uses a compatible 21-inch wheel before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: Fits compatible 21-inch off-road motorcycle wheels\u003c\/li\u003e\n\u003cli\u003eModel: Gen 2.0 Inner Bladder System\u003c\/li\u003e\n\u003cli\u003eBrand: Tubliss\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: TU21\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: TU21\u003c\/li\u003e\n\u003cli\u003eRim Protection: High-pressure inner bladder provides up to 100 PSI of protective pressure at the rim\u003c\/li\u003e\n\u003cli\u003eDual Air Chamber: Separates rim protection from tire inflation for low-pressure riding capability\u003c\/li\u003e\n\u003cli\u003eTraction: Supports increased tire contact and improved traction on off-road terrain\u003c\/li\u003e\n\u003cli\u003eFlat Repair: Allows quick repairs using standard tubeless tire plugs without removing the wheel in many situations\u003c\/li\u003e\n\u003cli\u003eRim Lock: Seals and stabilizes the tire around the full circumference of the rim\u003c\/li\u003e\n\u003cli\u003eRide Quality: Helps provide a plusher ride and reduces the risk of pinch flats\u003c\/li\u003e\n\u003cli\u003eKit Contents: Includes inner bladder, installation guide, rim tape and plug, rim lock, rim sticker, and installation poster\u003c\/li\u003e\n\u003cli\u003eApplication: For off-road use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549416456427,"sku":"03500796","price":112.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/2948973.png?v=1790688485"},{"product_id":"tubliss-tu19-gen-2-0-19-inch-off-road-tire-inner-bladder-system-kit","title":"Tubliss TU19 Gen 2.0 19-Inch Off-Road Tire Inner Bladder System Kit","description":"Inner Bladder - Gen 2.0 System - Kit - 19\"\n\u003cp\u003eThe Tubliss TU19 Gen 2.0 Inner Bladder System Kit is designed for 19-inch off-road motorcycle tires, replacing conventional inner tubes with a high-pressure inner bladder and tire-sealing system. Manufactured by Tubliss, this system creates a 360-degree rim lock that secures the tire to the rim while providing up to 100 PSI of rim protection. The design helps stabilize the tire sidewall, allowing it to absorb more impact before forces reach the rim.\u003c\/p\u003e\u003cp\u003eThe dual-air-chamber system enables riders to run the inner bladder at high pressure while adjusting the tire chamber to very low pressures for improved traction and a more compliant ride. The tubeless-style setup also allows punctures to be repaired with standard tire plugs in seconds, often without removing the wheel. With no conventional tube to pinch, the Tubliss system helps eliminate pinch flats, reduce rotating weight, extend tire life, and improve off-road traction.\u003c\/p\u003e\u003cp\u003eThis Gen 2.0 kit is intended for off-road use only and fits compatible 19-inch motorcycle wheel and tire applications. Proper installation and maintenance are required for reliable performance. The kit includes the Tubliss inner bladder, installation guide, rim tape and plug, rim lock, rim sticker, and installation poster. Manufacturer part number TU19 and vendor part number TU19 identify this Tubliss 19-inch system.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRim Protection: Provides up to 100 PSI of protective cushioning at the rim to help reduce damage from impacts.\u003c\/li\u003e\n\u003cli\u003e360-Degree Rim Lock: High-pressure inner bladder seals the tire around the full circumference of the rim and helps stabilize the sidewall.\u003c\/li\u003e\n\u003cli\u003eLow-Pressure Traction: Allows the tire chamber to operate at approximately 0 to 10 PSI for increased traction and a more compliant off-road ride.\u003c\/li\u003e\n\u003cli\u003eFast Tire Repairs: Tubeless-style construction permits quick puncture repairs using standard tire plugs without removing the wheel.\u003c\/li\u003e\n\u003cli\u003ePinch-Flat Resistance: Eliminates conventional inner tubes to help prevent pinch flats when properly installed and maintained.\u003c\/li\u003e\n\u003cli\u003eDurable Construction: Designed for long service life and reduced reliance on replacement tubes.\u003c\/li\u003e\n\u003cli\u003eWeight Reduction: Lighter than many heavy-duty conventional tube setups.\u003c\/li\u003e\n\u003cli\u003eFitment: Intended for compatible 19-inch off-road motorcycle tires and wheels.\u003c\/li\u003e\n\u003cli\u003eKit Contents: Includes one Tubliss inner bladder, installation guide, rim tape and plug, rim lock, rim sticker, and installation poster.\u003c\/li\u003e\n\u003cli\u003eUse: For off-road use only.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549419077867,"sku":"03500797","price":112.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/2948975.png?v=1790688561"},{"product_id":"tubliss-gen-2-0-inner-bladder-system-kit-for-18-inch-off-road-tires-part-tu18","title":"TUBLISS Gen 2.0 Inner Bladder System Kit for 18-Inch Off-Road Tires, Part TU18","description":"Inner Bladder - Gen 2.0 System - Kit - 18\"\n\u003cp\u003eThe TUBLISS Gen 2.0 Inner Bladder System Kit provides a high-pressure, rim-protecting alternative to conventional inner tubes for 18-inch off-road motorcycle tires. Manufactured by TUBLISS and identified by manufacturer and vendor part number TU18, this system uses a dual-air-chamber design. The high-pressure inner bladder creates a 360-degree rim lock, seals the tire around the full circumference of the rim, and helps stabilize the tire sidewall for improved impact absorption and rim protection.\u003c\/p\u003e\u003cp\u003eDesigned for off-road use only, the TUBLISS TU18 system allows the inner bladder to operate at up to 100 PSI while the tire can be run at very low pressure, from approximately 0 to 10 PSI, depending on riding conditions and setup requirements. Lower tire pressures can increase traction, provide a more compliant ride, and help the tire conform to uneven terrain. Because the system eliminates the conventional tube, riders can repair many punctures with standard tubeless tire plugs without removing the wheel. Proper installation, inflation, inspection, and maintenance are required for reliable performance.\u003c\/p\u003e\u003cp\u003eThe TUBLISS 18-inch Gen 2.0 kit is built for long-term durability and can help reduce recurring tube replacement costs. It is also lighter than many heavy-duty tube setups and helps prevent pinch flats associated with conventional tubes. The kit includes the TUBLISS inner bladder, installation guide, rim tape and plug, rim lock, rim sticker, and installation poster. Confirm that your wheel, tire, and rim are compatible with the 18-inch TU18 system before installation, and follow all manufacturer instructions for fitment and service.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: Fits compatible 18-inch off-road motorcycle wheels and tires\u003c\/li\u003e\n\u003cli\u003eModel: Gen 2.0 Inner Bladder System Kit\u003c\/li\u003e\n\u003cli\u003eBrand: TUBLISS\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: TU18\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: TU18\u003c\/li\u003e\n\u003cli\u003eRim Protection: High-pressure bladder provides up to 100 PSI of protective cushioning at the rim\u003c\/li\u003e\n\u003cli\u003eDual Air Chamber: Separates bladder pressure from tire pressure for flexible off-road tuning\u003c\/li\u003e\n\u003cli\u003eRim Lock: Seals and stabilizes the tire around the full circumference of the rim\u003c\/li\u003e\n\u003cli\u003eLow-Pressure Capability: Allows the tire to run at approximately 0 to 10 PSI when properly installed and maintained\u003c\/li\u003e\n\u003cli\u003ePuncture Repair: Supports quick repairs using standard tubeless tire plugs without removing the wheel\u003c\/li\u003e\n\u003cli\u003eTraction: Helps increase tire contact and traction on uneven off-road surfaces\u003c\/li\u003e\n\u003cli\u003eRide Quality: Provides a plusher ride by allowing lower tire pressures\u003c\/li\u003e\n\u003cli\u003eDurability: Designed to outlast many conventional tube setups when properly installed and maintained\u003c\/li\u003e\n\u003cli\u003eIncluded Components: Inner bladder, installation guide, rim tape and plug, rim lock, rim sticker, and installation poster\u003c\/li\u003e\n\u003cli\u003eApplication: For off-road use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549421601003,"sku":"03500798","price":112.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/2948977.png?v=1790688615"},{"product_id":"tubliss-red-liner-21-inch-universal-replacement-liner-rl21","title":"Tubliss Red Liner 21-Inch Universal Replacement Liner RL21","description":"Red Liner - 21\"\n\u003cp\u003eThe Tubliss Red Liner RL21 is a universal replacement liner designed for 21-inch Tubliss tire systems. This liner-only component helps restore the performance and fit of a compatible Tubliss setup without replacing the complete system. Manufactured by Tubliss and offered under vendor part number RL21, it is intended for riders who need a dependable replacement liner for maintenance or service.\u003c\/p\u003e\u003cp\u003eDesigned for compatible 21-inch motorcycle and off-road wheel applications, the Tubliss Red Liner supports proper installation within the Tubliss system when used with the corresponding components. Confirm fitment with your wheel, tire, and Tubliss system before ordering. The universal design provides practical replacement coverage while preserving compatibility with the manufacturer’s intended setup.\u003c\/p\u003e\u003cp\u003eFeature: Tubliss Red Liner RL21 replacement component\u003cbr\u003eFeature: Universal fit for compatible 21-inch Tubliss systems\u003cbr\u003eFeature: Liner-only design for system maintenance or repair\u003cbr\u003eFeature: Manufactured by Tubliss\u003cbr\u003eFeature: Vendor part number RL21\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTubliss Red Liner RL21 replacement component\u003c\/li\u003e\n\u003cli\u003eUniversal fit for compatible 21-inch Tubliss systems\u003c\/li\u003e\n\u003cli\u003eLiner-only design for system maintenance or repair\u003c\/li\u003e\n\u003cli\u003eManufactured by Tubliss\u003c\/li\u003e\n\u003cli\u003eVendor part number RL21\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549422387435,"sku":"03500801","price":57.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/2948981.png?v=1790688653"},{"product_id":"tubliss-red-liner-rl19-universal-19-inch-replacement-liner","title":"TUBLISS Red Liner RL19 Universal 19-Inch Replacement Liner","description":"Red Liner - 19\"\n\u003cp\u003eThe TUBLISS Red Liner RL19 is a universal replacement liner designed for use with compatible 19-inch TUBLISS tire systems. This liner-only component helps restore the sealing and protective function of a TUBLISS setup without requiring replacement of the complete system. It is suited for riders, technicians, and powersports enthusiasts maintaining off-road wheels equipped with the TUBLISS system.\u003c\/p\u003e\u003cp\u003eManufactured for TUBLISS, the RL19 is identified by manufacturer part number RL19 and vendor part number RL19. Its universal fitment makes it a practical service replacement for compatible 19-inch applications. Verify the wheel size and TUBLISS system compatibility before installation to ensure proper fit and reliable performance.\u003c\/p\u003e\u003cp\u003eThe TUBLISS Red Liner is intended for replacement use during tire service or system maintenance. Install according to the applicable TUBLISS installation instructions and inspect the surrounding components for wear or damage before reassembly. This product includes the red liner only; other TUBLISS system components are not included.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 19-inch application\u003c\/li\u003e\n\u003cli\u003eProduct Type: Replacement red liner only\u003c\/li\u003e\n\u003cli\u003eModel: RL19\u003c\/li\u003e\n\u003cli\u003eBrand: TUBLISS\u003c\/li\u003e\n\u003cli\u003eManufacturer: TUBLISS\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: RL19\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: RL19\u003c\/li\u003e\n\u003cli\u003eFitment: Universal fit for compatible 19-inch TUBLISS tire systems\u003c\/li\u003e\n\u003cli\u003eApplication: Off-road powersports tire system maintenance and replacement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549424550123,"sku":"03500802","price":57.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/2948982.png?v=1790688728"},{"product_id":"tubliss-red-liner-rl18-universal-18-inch-tire-liner","title":"TUBLISS Red Liner RL18 Universal 18-Inch Tire Liner","description":"Red Liner - 18\"\n\u003cp\u003eThe TUBLISS Red Liner RL18 is a universal replacement liner designed for compatible 18-inch TUBLISS tire systems. This liner-only component helps support the inner high-pressure tube setup and is intended for riders maintaining or restoring their TUBLISS system without replacing the complete kit. The red liner is manufactured by TUBLISS and identified by manufacturer part number RL18 and vendor part number RL18.\u003c\/p\u003e\u003cp\u003eDesigned for off-road motorcycle applications, the TUBLISS Red Liner RL18 provides a practical fit for compatible 18-inch wheel assemblies. Confirm that your wheel and existing TUBLISS system match the required 18-inch application before installation. This universal liner is intended as a replacement component and does not represent a complete tire conversion kit, inner tube, rim lock, or installation package.\u003c\/p\u003e\u003cp\u003eFeature: Universal replacement liner for compatible TUBLISS systems\u003cbr\u003eFeature: Fits 18-inch off-road motorcycle wheel applications\u003cbr\u003eFeature: Red liner design for easy component identification\u003cbr\u003eFeature: Liner-only replacement part\u003cbr\u003eFeature: Brand: TUBLISS\u003cbr\u003eFeature: Manufacturer part number: RL18\u003cbr\u003eFeature: Vendor part number: RL18\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUniversal replacement liner for compatible TUBLISS systems\u003c\/li\u003e\n\u003cli\u003eFits 18-inch off-road motorcycle wheel applications\u003c\/li\u003e\n\u003cli\u003eRed liner design for easy component identification\u003c\/li\u003e\n\u003cli\u003eLiner-only replacement part\u003c\/li\u003e\n\u003cli\u003eBrand: TUBLISS\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: RL18\u003c\/li\u003e\n\u003cli\u003eVendor part number: RL18\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549426122987,"sku":"03500803","price":57.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/2948983.png?v=1790688756"},{"product_id":"tubliss-ib21-inner-bladder-for-gen-2-0-21-inch-off-road-tire-system","title":"TUBLISS IB21 Inner Bladder for Gen 2.0 21-Inch Off-Road Tire System","description":"Inner Bladder - For Gen 2.0 System - 21\"\n\u003cp\u003eThe TUBLISS IB21 Inner Bladder is designed for the TUBLISS Gen 2.0 21-inch tire system, providing a lightweight alternative to conventional heavy-duty tubes for off-road motorcycles. This inner bladder works with standard tubeless tire plugs, allowing many punctures to be repaired in seconds without removing the wheel. It is intended for off-road use only and is compatible with properly installed and maintained TUBLISS Gen 2.0 systems.\u003c\/p\u003e\u003cp\u003eDesigned to support up to 100 PSI in the high-pressure chamber, the TUBLISS system also allows riders to run very low tire pressures where conditions require increased traction. The bladder helps eliminate pinch flats, deliver a plusher ride, and improve tire contact with challenging terrain. Lower operating pressures can provide significant traction benefits while allowing tires to conform more effectively to uneven surfaces.\u003c\/p\u003e\u003cp\u003eThe TUBLISS IB21 is supplied as the inner bladder only and does not include the complete Gen 2.0 system or other installation components. Proper installation, inflation, inspection, and maintenance are required for reliable performance. When installed and maintained according to TUBLISS recommendations, this replacement bladder helps extend tire life and offers a more economical repair and riding solution than repeatedly replacing inner tubes. Manufacturer part number IB21 and vendor part number IB21 identify this 21-inch TUBLISS replacement component.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFitment: Designed for the TUBLISS Gen 2.0 21-inch off-road tire system\u003c\/li\u003e\n\u003cli\u003eProduct Type: Replacement inner bladder only\u003c\/li\u003e\n\u003cli\u003eBrand: TUBLISS\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: IB21\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: IB21\u003c\/li\u003e\n\u003cli\u003eTire Repairs: Supports quick repairs using standard tubeless tire plugs without removing the wheel\u003c\/li\u003e\n\u003cli\u003ePressure Range: High-pressure chamber supports up to 100 PSI, while the tire can be operated at very low pressures when appropriate\u003c\/li\u003e\n\u003cli\u003eTraction: Helps increase tire contact and traction on off-road terrain\u003c\/li\u003e\n\u003cli\u003eProtection: Helps prevent pinch flats when properly installed and maintained\u003c\/li\u003e\n\u003cli\u003eRide Quality: Supports a plusher ride and improved tire conformity\u003c\/li\u003e\n\u003cli\u003eMaintenance: Requires proper installation, inflation, inspection, and regular maintenance\u003c\/li\u003e\n\u003cli\u003eApplication: For off-road use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549427532011,"sku":"03500804","price":12.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/2948984.png?v=1790688803"},{"product_id":"tubliss-ib19-inner-bladder-for-gen-2-0-tubeless-tire-system-19-inch-off-road-motorcycle","title":"TUBLISS IB19 Inner Bladder for Gen 2.0 Tubeless Tire System, 19-Inch Off-Road Motorcycle","description":"Inner Bladder - For Gen 2.0 System - 19\"\n\u003cp\u003eThe TUBLISS IB19 Inner Bladder is a replacement inner bladder designed for the TUBLISS Gen 2.0 tubeless tire system on compatible 19-inch off-road motorcycle wheels. It allows riders to run a high-pressure inner chamber for rim protection while maintaining adjustable tire pressure in the outer chamber for improved traction and ride control. This component is the inner bladder only and is intended for use with the complete Gen 2.0 system.\u003c\/p\u003e\u003cp\u003eWith the TUBLISS Gen 2.0 system properly installed and maintained, riders can repair many tire punctures in seconds using standard tubeless tire plugs without removing the wheel. The system supports up to 100 PSI in the inner bladder and permits very low outer-chamber pressures when application and terrain require it. Benefits may include increased traction, a plusher ride, longer tire life, reduced pinch-flat risk, and lower weight compared with heavy-duty inner tubes.\u003c\/p\u003e\u003cp\u003eThe TUBLISS IB19 is intended for off-road use only and must be installed according to the manufacturer’s instructions. Confirm that your wheel, tire, and existing TUBLISS equipment are compatible with the 19-inch Gen 2.0 configuration before installation. Manufacturer part number IB19 and vendor part number IB19 identify this replacement bladder.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFitment: Designed for compatible 19-inch off-road motorcycle wheels using the TUBLISS Gen 2.0 tubeless tire system\u003c\/li\u003e\n\u003cli\u003eSystem compatibility: Replacement inner bladder for the Gen 2.0 system; inner bladder only\u003c\/li\u003e\n\u003cli\u003eTire repairs: Enables fast repairs with standard tubeless tire plugs without removing the wheel when properly installed\u003c\/li\u003e\n\u003cli\u003ePressure range: Supports up to 100 PSI in the inner bladder and low outer-chamber pressures for terrain-specific traction\u003c\/li\u003e\n\u003cli\u003eTraction: Helps provide increased tire contact and improved off-road grip\u003c\/li\u003e\n\u003cli\u003eRide quality: Supports a plusher ride and may help reduce pinch flats\u003c\/li\u003e\n\u003cli\u003eWeight advantage: Lighter than many heavy-duty inner tubes\u003c\/li\u003e\n\u003cli\u003eUse: For off-road use only\u003c\/li\u003e\n\u003cli\u003eBrand: TUBLISS\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: IB19\u003c\/li\u003e\n\u003cli\u003eVendor part number: IB19\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549428646123,"sku":"03500805","price":12.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/2948985.png?v=1790688855"},{"product_id":"tubliss-ib18-inner-bladder-for-gen-2-0-tubeless-tire-system-18-inch-off-road-motorcycle-tires","title":"TUBLISS IB18 Inner Bladder for Gen 2.0 Tubeless Tire System, 18-Inch Off-Road Motorcycle Tires","description":"Inner Bladder - For Gen 2.0 System - 18\"\n\u003cp\u003eThe TUBLISS IB18 Inner Bladder is a replacement inner bladder designed for the TUBLISS Gen 2.0 tubeless tire system used with 18-inch off-road motorcycle tires. Manufactured by TUBLISS and identified by manufacturer part number IB18 and vendor part number IB18, this inner bladder supports a tubeless tire setup that allows riders to repair punctures quickly with standard tubeless tire plugs, often without removing the wheel.\u003c\/p\u003e\u003cp\u003eDesigned for off-road use only, the TUBLISS Gen 2.0 system separates the tire into two pressure zones. The inner bladder can be inflated to 100 PSI to secure the tire bead, while the outer tire chamber can be operated at very low pressure—approximately 0 to 10 PSI, depending on riding conditions and setup requirements. This configuration helps improve traction, reduce pinch flats, and provide a more compliant ride over challenging terrain.\u003c\/p\u003e\u003cp\u003eFeature: Gen 2.0 replacement inner bladder for the TUBLISS tubeless tire system. Feature: Fits 18-inch off-road motorcycle tire applications. Feature: Supports quick repairs using standard tubeless tire plugs. Feature: Helps eliminate conventional inner tubes and reduce the risk of pinch flats. Feature: Enables low tire pressures for increased traction while maintaining bead security through the high-pressure inner bladder. Feature: Lighter than heavy-duty inner tubes and designed for long-lasting performance when properly installed and maintained. Install and use the TUBLISS IB18 according to the manufacturer’s instructions, and verify compatibility with the specific wheel, tire, and Gen 2.0 system before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGen 2.0 replacement inner bladder for the TUBLISS tubeless tire system\u003c\/li\u003e\n\u003cli\u003eFits 18-inch off-road motorcycle tire applications\u003c\/li\u003e\n\u003cli\u003eSupports quick puncture repairs with standard tubeless tire plugs\u003c\/li\u003e\n\u003cli\u003eInner bladder operates at up to 100 PSI to help secure the tire bead\u003c\/li\u003e\n\u003cli\u003eAllows low outer tire pressures of approximately 0 to 10 PSI for improved traction\u003c\/li\u003e\n\u003cli\u003eHelps reduce pinch flats and provides a more compliant off-road ride\u003c\/li\u003e\n\u003cli\u003eLighter than heavy-duty inner tubes and economical to maintain\u003c\/li\u003e\n\u003cli\u003eBrand: TUBLISS\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: IB18\u003c\/li\u003e\n\u003cli\u003eVendor part number: IB18\u003c\/li\u003e\n\u003cli\u003eFor off-road use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549432348907,"sku":"03500806","price":12.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/2948986.png?v=1790688910"},{"product_id":"tubliss-rt27-27-mm-rear-rim-tape-for-tube-protection","title":"Tubliss RT27 27 mm Rear Rim Tape for Tube Protection","description":"Rim Tape - For Rear Rim - 27 mm\n\u003cp\u003eThe Tubliss RT27 Rear Rim Tape is designed to cushion the tube against spoke nipples while helping prevent dirt and debris from entering the rim. Intended for rear rim applications, this tape supports reliable tire and wheel maintenance for compatible Tubliss systems.\u003c\/p\u003e\u003cp\u003eWith an approximately 200-inch length, the Tubliss RT27 provides ample material for installation and servicing. Its 27 mm size is designed for compatible rear rims, helping create a protective barrier between the inner tube and spoke hardware. Confirm rear rim and Tubliss system compatibility before installation.\u003c\/p\u003e\u003cp\u003eBrand: Tubliss\u003cbr\u003eModel: RT27\u003cbr\u003eManufacturer Part Number: RT27\u003cbr\u003eVendor Part Number: RT27\u003cbr\u003eSize: 27 mm\u003cbr\u003eApplication: Rear rim\u003cbr\u003eApproximate Length: 200 inches\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProtective cushioning: Helps shield the tube from contact with spoke nipples.\u003c\/li\u003e\n\u003cli\u003eDirt resistance: Helps keep dirt and debris out of the rim.\u003c\/li\u003e\n\u003cli\u003eRear rim application: Designed for compatible Tubliss rear wheel systems.\u003c\/li\u003e\n\u003cli\u003e27 mm size: Sized for compatible rear rims and installation requirements.\u003c\/li\u003e\n\u003cli\u003eExtended roll length: Approximately 200 inches of tape supports installation and service needs.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549433200875,"sku":"03500799","price":5.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/2948978.png?v=1790688941"},{"product_id":"tubliss-rt22-22-mm-front-rim-tape","title":"TUBLISS RT22 22 mm Front Rim Tape","description":"Rim Tape - For Front Rim - 22 mm\n\u003cp\u003eThe TUBLISS RT22 Front Rim Tape is designed to cushion the inner tube against spoke nipples while helping prevent dirt and debris from entering the rim. Made for 22 mm front rims, this tape supports proper tube protection and contributes to dependable wheel assembly performance.\u003c\/p\u003e\u003cp\u003eWith approximately 200 inches of tape, the TUBLISS RT22 provides ample material for installation on compatible front rims. Its flexible construction is intended to sit securely along the rim bed, creating a protective barrier between the tube and spoke hardware. This makes it a practical replacement or service component for maintaining a properly assembled wheel.\u003c\/p\u003e\u003cp\u003eDesigned and manufactured by TUBLISS, the RT22 is suitable for applications requiring a 22 mm front rim tape. Verify rim width and vehicle fitment before installation. The manufacturer part number is RT22, and the vendor part number is 03500800.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFitment: Designed for compatible 22 mm front rims\u003c\/li\u003e\n\u003cli\u003eProtection: Cushions the tube against spoke nipples\u003c\/li\u003e\n\u003cli\u003eDebris Control: Helps keep dirt out of the rim\u003c\/li\u003e\n\u003cli\u003eCoverage: Approximately 200 inches of tape\u003c\/li\u003e\n\u003cli\u003eBrand: TUBLISS\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: RT22\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: 03500800\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549435986155,"sku":"03500800","price":5.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/2948980.png?v=1790689000"},{"product_id":"tubliss-dr1-rear-deflector-replacement-component","title":"Tubliss DR1 Rear Deflector Replacement Component","description":"Deflector - Replacement - Rear\n\u003cp\u003eThe Tubliss DR1 Rear Deflector is a replacement component designed for Tubliss tire systems used on off-road motorcycles. Manufactured by Tubliss and supplied under vendor part number DR1, this deflector helps restore the intended fit and protective function of a compatible rear Tubliss installation.\u003c\/p\u003e\u003cp\u003eDesigned specifically for the rear wheel application, the DR1 replacement deflector is suitable for riders maintaining or repairing a Tubliss system. Confirm compatibility with your existing Tubliss setup before ordering, as fitment depends on the system model and rear-wheel configuration. This component is intended as a replacement part rather than a complete tire-inflation system.\u003c\/p\u003e\u003cp\u003eInstallation should follow the manufacturer’s recommended procedures for the Tubliss system. Inspect related components during service and ensure the deflector is properly positioned before returning the motorcycle to use. The Tubliss DR1 Rear Deflector provides a practical replacement solution for maintaining proper system fitment and operation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProduct Type: Rear deflector replacement component\u003c\/li\u003e\n\u003cli\u003eBrand: Tubliss\u003c\/li\u003e\n\u003cli\u003eModel: DR1\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: DR1\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: DR1\u003c\/li\u003e\n\u003cli\u003eFitment: Designed for compatible Tubliss rear tire systems\u003c\/li\u003e\n\u003cli\u003eApplication: Off-road motorcycle rear-wheel maintenance and replacement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549438214379,"sku":"03500807","price":4.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/4601910.png?v=1790689037"},{"product_id":"tubliss-df1-front-deflector-replacement-for-tubliss-tire-systems","title":"Tubliss DF1 Front Deflector Replacement for Tubliss Tire Systems","description":"Deflector - Replacement - Front\n\u003cp\u003eThe Tubliss DF1 Front Deflector is a replacement component designed for Tubliss tire systems. Manufactured by Tubliss and identified by manufacturer part number DF1, this deflector is intended for front-wheel applications and helps restore the protective function of a properly equipped Tubliss system.\u003c\/p\u003e\u003cp\u003eDesigned as a direct replacement for the compatible Tubliss front deflector, the DF1 supports fitment on Tubliss-equipped motorcycles using the corresponding front system configuration. It is suitable for replacing a worn, damaged, or missing deflector during system maintenance or repair. Verify your existing Tubliss system and front-wheel application before ordering to ensure compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Compatible with select Tubliss front tire systems requiring the DF1 replacement deflector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Tubliss\u003cbr\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Tubliss\u003cbr\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e DF1\u003cbr\u003e\u003cstrong\u003eVendor Part Number:\u003c\/strong\u003e DF1\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Front Tubliss system replacement component\u003cbr\u003e\u003cstrong\u003eApproximate Weight:\u003c\/strong\u003e 0.71 lb\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacement component: Helps restore a compatible Tubliss front tire system\u003c\/li\u003e\n\u003cli\u003eFront application: Designed for Tubliss front-wheel system configurations\u003c\/li\u003e\n\u003cli\u003eSystem compatibility: Fits select Tubliss systems requiring manufacturer part number DF1\u003c\/li\u003e\n\u003cli\u003eBrand-specific replacement: Manufactured by Tubliss for applicable Tubliss assemblies\u003c\/li\u003e\n\u003cli\u003eService-ready design: Suitable for replacing a worn, damaged, or missing deflector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549440934123,"sku":"03500808","price":4.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/4601914.png?v=1790689082"},{"product_id":"tubliss-mini-floor-pump-mfp1-110-psi-air-pressure-pump","title":"TUBLISS Mini Floor Pump MFP1, 110 PSI Air Pressure Pump","description":"Floor Pump - Mini\n\u003cp\u003eThe TUBLISS Mini Floor Pump MFP1 is a compact, practical air pump designed for accurately measuring and adjusting tire pressure. With a pressure range up to 110 psi, it provides dependable inflation control for compatible TUBLISS systems and other applications that require precise pressure monitoring. Its mini floor-pump format offers a convenient balance of portability and stability for use in the garage, workshop, trailer, or trackside.\u003c\/p\u003e\u003cp\u003eBuilt by TUBLISS and identified by manufacturer and vendor part number MFP1, this pump is suited to riders and technicians who need a reliable manual inflation solution without relying on electrical power. The integrated pressure gauge helps support consistent pressure checks during installation, maintenance, and pre-ride preparation. Its compact design is easy to store with tire tools and service equipment, while the approximately 6.7-pound weight provides a stable feel during operation without making the pump unnecessarily difficult to transport.\u003c\/p\u003e\u003cp\u003eUse the TUBLISS Mini Floor Pump MFP1 for tire pressure adjustment and routine service where accurate readings up to 110 psi are required. Fitment is intended for TUBLISS tire system maintenance and compatible tire inflation applications; verify valve compatibility and application requirements before use.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePressure Range: Measures air pressure up to 110 psi\u003c\/li\u003e\n\u003cli\u003eProduct Type: Mini floor pump for tire inflation and pressure adjustment\u003c\/li\u003e\n\u003cli\u003eFitment: Designed for TUBLISS system maintenance and compatible tire applications\u003c\/li\u003e\n\u003cli\u003eBrand: TUBLISS\u003c\/li\u003e\n\u003cli\u003eModel: Mini Floor Pump MFP1\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: MFP1\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: MFP1\u003c\/li\u003e\n\u003cli\u003ePortability: Compact design with an approximately 6.7-pound weight for convenient storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549444047083,"sku":"38100162","price":32.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/2938581.png?v=1790689160"},{"product_id":"tubliss-sk1-rim-sticker-kit-for-gen-2-0-tire-system","title":"TUBLISS SK1 Rim Sticker Kit for Gen 2.0 Tire System","description":"\u003cp\u003eRefresh and protect your Nuetech Tubliss Gen 2.0 tire system with the TUBLISS SK1 Rim Sticker Kit. Designed for riders who need to maintain a clean, professional rim installation, this replacement sticker kit helps support proper identification and finishing of the Tubliss setup during tire service or system replacement.\u003c\/p\u003e\u003cp\u003eManufactured for compatibility with the Nuetech Tubliss Gen 2.0 tire system, the TUBLISS SK1 is suited for off-road motorcycles and other compatible applications using the Gen 2.0 rim-mounted system. Its application-specific design helps provide a practical replacement for worn, damaged, or missing rim stickers, making it a useful service part for routine maintenance and installation work.\u003c\/p\u003e\u003cp\u003eUse the TUBLISS SK1 Rim Sticker Kit when restoring an existing Tubliss installation or preparing a replacement rim for service. Verify that your motorcycle and wheel assembly use the Gen 2.0 Tubliss system before ordering. This kit is manufactured by Nuetech and is identified by manufacturer part number SK1 and vendor part number SK1.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProduct Type: Rim sticker kit for the Nuetech Tubliss tire system\u003c\/li\u003e\n\u003cli\u003eCompatibility: Designed for Nuetech Tubliss Gen 2.0 applications\u003c\/li\u003e\n\u003cli\u003eBrand: TUBLISS\u003c\/li\u003e\n\u003cli\u003eManufacturer: Nuetech\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: SK1\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: SK1\u003c\/li\u003e\n\u003cli\u003eApplication: Replacement and service support for compatible off-road motorcycle rim installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TUBLISS","offers":[{"title":"Default Title","offer_id":67549445423339,"sku":"43202569","price":5.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/2948972.png?v=1790689211"},{"product_id":"nuetech-tubliss-19-inch-ib19-replacement-bladder","title":"Nuetech TUbliss 19-Inch IB19 Replacement Bladder","description":"Replacement bladder for the Nuetech TUbliss Gen 2.0 system.\n\u003cp\u003eThe Nuetech TUbliss 19-Inch IB19 is a replacement bladder for the Nuetech TUbliss Gen 2.0 system. It is designed for use with the 19-inch TUbliss setup and is supplied as the bladder only.\u003c\/p\u003e\u003cp\u003eManufacturer part number: IB19. Vendor part number: IB19. This replacement component is intended to restore the bladder portion of a compatible Nuetech TUbliss Gen 2.0 system. Verify that your system uses the 19-inch configuration before purchase.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacement bladder: Designed as a replacement bladder for the Nuetech TUbliss Gen 2.0 system.\u003c\/li\u003e\n\u003cli\u003e19-inch configuration: Intended for the 19-inch Nuetech TUbliss setup.\u003c\/li\u003e\n\u003cli\u003eBladder only: Product is supplied as the bladder only.\u003c\/li\u003e\n\u003cli\u003ePart number: IB19.\u003c\/li\u003e\n\u003cli\u003eBrand: Nuetech TUbliss.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305453744363,"sku":"626100","price":13.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/aa82a32f51383c2062ca71b435743495.jpg?v=1793264880"},{"product_id":"nuetech-tubliss-110-100-18-platinum-standard-nitromousse-nm18-285","title":"Nuetech TUbliss 110\/100-18 Platinum Standard NitroMousse NM18-285","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003eStandard Platinum 10-12 PSI Compound for a traditional feel - Best for all around riding, everything from single track to moto to wide open desert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Platinum Standard NitroMousse NM18-285 is a 110\/100-18 high-performance foam inner tube designed to replace a traditional pneumatic inner tube. Its proprietary elastomer construction contains millions of nitrogen-charged micro-cells, providing a 100 percent flat-proof design for powersports use.\u003c\/p\u003e\u003cp\u003eBuilt to continue performing after cuts, punctures, tears and hammering, this NitroMousse helps riders maintain confidence through demanding rides and races. The Platinum Standard compound is designed for a traditional feel at 10–12 PSI and is suited to a broad range of riding, including single-track trails, motocross and wide-open desert terrain.\u003c\/p\u003e\u003cp\u003eThis product is manufactured by Nuetech TUbliss and carries vendor part number NM18-285. It is sized for 110\/100-18 applications; specific vehicle fitment should be confirmed before purchase.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlat-proof foam inner tube: Replaces a traditional pneumatic inner tube and is designed to remain functional after cuts, punctures, tears and hammering.\u003c\/li\u003e\n\u003cli\u003ePlatinum Standard compound: Provides a traditional feel at 10–12 PSI.\u003c\/li\u003e\n\u003cli\u003eHigh-performance construction: Made from proprietary elastomers containing millions of nitrogen-charged micro-cells.\u003c\/li\u003e\n\u003cli\u003eVersatile riding use: Designed for riding conditions ranging from single-track trails and motocross to wide-open desert terrain.\u003c\/li\u003e\n\u003cli\u003eSize: 110\/100-18.\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: NM18-285.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nClearance Item: t\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305459871979,"sku":"626101","price":133.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/9d76e84b5a42adef3d83c422a7aee36b.png?v=1793264924"},{"product_id":"nuetech-tubliss-120-100-18-platinum-standard-nitromousse-nm18-305","title":"Nuetech TUbliss 120\/100-18 Platinum Standard NitroMousse NM18-305","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003eStandard Platinum 10-12 PSI Compound for a traditional feel - Best for all around riding, everything from single track to moto to wide open desert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Platinum Standard NitroMousse NM18-305 is a high-performance foam inner tube designed to replace a traditional pneumatic inner tube in 120\/100-18 applications. Its proprietary elastomer construction contains millions of nitrogen-charged micro-cells, providing a flat-proof design for continued performance after cuts, punctures, tears, and impacts.\u003c\/p\u003e\u003cp\u003eThe Standard Platinum 10–12 PSI compound delivers a traditional feel for versatile riding. It is suited to a range of riding conditions, from single-track trails and motocross to wide-open desert terrain. This NitroMousse is identified by manufacturer part number NM18-305 and vendor part number NM18-305.\u003c\/p\u003e\u003cp\u003eFitment: 120\/100-18 tire applications. Verify tire size and application requirements before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlat-proof foam inner tube: Replaces a traditional pneumatic inner tube and is designed to continue performing after cuts, punctures, tears, and impacts.\u003c\/li\u003e\n\u003cli\u003eProprietary elastomer construction: Made with millions of nitrogen-charged micro-cells.\u003c\/li\u003e\n\u003cli\u003eStandard Platinum compound: 10–12 PSI compound provides a traditional feel.\u003c\/li\u003e\n\u003cli\u003eVersatile riding application: Designed for use across single-track, motocross, and wide-open desert riding.\u003c\/li\u003e\n\u003cli\u003eFitment: For 120\/100-18 tire applications.\u003c\/li\u003e\n\u003cli\u003ePart numbers: Manufacturer and vendor part number NM18-305.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nClearance Item: t\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305464000747,"sku":"626102","price":133.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/993b8658035912df79902e91ac08939a.png?v=1793264955"},{"product_id":"nuetech-tubliss-140-80-18-platinum-standard-nitromousse-nm18-325","title":"Nuetech TUbliss 140\/80-18 Platinum Standard NitroMousse NM18-325","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003eStandard Platinum 10-12 PSI Compound for a traditional feel - Best for all around riding, everything from single track to moto to wide open desert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss NitroMousse NM18-325 is a high-performance foam inner tube designed to replace a traditional pneumatic inner tube in powersports applications. Sized for 140\/80-18 tires, this Platinum Standard compound provides a traditional feel with an approximate 10–12 PSI equivalent.\u003c\/p\u003e\u003cp\u003eConstructed from proprietary elastomers containing millions of nitrogen-charged micro-cells, the NitroMousse is designed to remain functional after cuts, punctures, tears and hammering. Its flat-proof construction helps provide confidence during races, trail riding and other off-road use where maintaining performance is important.\u003c\/p\u003e\u003cp\u003eThe Platinum Standard 10–12 PSI compound is intended for all-around riding, including single-track riding, motocross and wide-open desert terrain. Manufacturer part number: NM18-325. Vendor part number: NM18-325.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFitment: Designed for 140\/80-18 tire applications.\u003c\/li\u003e\n\u003cli\u003eCompound: Platinum Standard compound with an approximate 10–12 PSI equivalent feel.\u003c\/li\u003e\n\u003cli\u003eConstruction: Made from proprietary elastomers with millions of nitrogen-charged micro-cells.\u003c\/li\u003e\n\u003cli\u003eFlat-proof design: Designed to continue performing after cuts, punctures, tears and hammering.\u003c\/li\u003e\n\u003cli\u003eUse: Suitable for all-around riding, including single track, motocross and wide-open desert riding.\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: NM18-325.\u003c\/li\u003e\n\u003cli\u003eVendor part number: NM18-325.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nClearance Item: t\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305467408619,"sku":"626103","price":133.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/c30346160bfd5980f4a6f24929254939.png?v=1793264985"},{"product_id":"nuetech-tubliss-100-90-19-platinum-standard-nitromousse-nm19-255","title":"Nuetech TUbliss 100\/90-19 Platinum Standard NitroMousse NM19-255","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003eStandard Platinum 10-12 PSI Compound for a traditional feel - Best for all around riding, everything from single track to moto to wide open desert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Platinum Standard NitroMousse NM19-255 is a high-performance foam innertube designed to replace a traditional pneumatic innertube in a 100\/90-19 application. Its 100 percent flat-proof construction is made from proprietary elastomers containing nitrogen-charged micro-cells, helping the mousse continue performing after cuts, punctures, tears and hammering.\u003c\/p\u003e\u003cp\u003eThe Standard Platinum 10–12 PSI compound provides a traditional feel for versatile riding conditions. It is intended for all-around use, including single-track riding, motocross and wide-open desert terrain. Because this product replaces a conventional air-filled innertube with a foam design, it is suited to riders seeking continued performance without concern over a conventional innertube going flat during a ride or race.\u003c\/p\u003e\u003cp\u003eManufacturer part number: NM19-255. Vendor part number: NM19-255. Fitment: 100\/90-19 tire size.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e100 percent flat-proof foam innertube design\u003c\/li\u003e\n\u003cli\u003eReplaces a traditional pneumatic innertube\u003c\/li\u003e\n\u003cli\u003eMade from proprietary elastomers with nitrogen-charged micro-cells\u003c\/li\u003e\n\u003cli\u003eDesigned to continue performing after cuts, punctures, tears and hammering\u003c\/li\u003e\n\u003cli\u003eStandard Platinum 10–12 PSI compound provides a traditional feel\u003c\/li\u003e\n\u003cli\u003eSuitable for all-around riding, including single track, motocross and wide-open desert terrain\u003c\/li\u003e\n\u003cli\u003eFits 100\/90-19 applications\u003c\/li\u003e\n\u003cli\u003eManufacturer and vendor part number: NM19-255\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nClearance Item: t\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305476157675,"sku":"626104","price":133.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/139e0549ffbd889f70f9f00b2f4b495d.png?v=1793265023"},{"product_id":"nuetech-tubliss-110-90-120-80-19-platinum-standard-nitromousse-nm19-280","title":"Nuetech TUbliss 110\/90-120\/80-19 Platinum Standard NitroMousse NM19-280","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003eStandard Platinum 10-12 PSI Compound for a traditional feel - Best for all around riding, everything from single track to moto to wide open desert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Platinum Standard NitroMousse NM19-280 is a high-performance foam inner tube designed to replace a traditional pneumatic inner tube in compatible powersports applications. Its 100% flat-proof construction is designed to continue performing after cuts, punctures, tears, and hammering, helping provide confidence during races and trail rides.\u003c\/p\u003e\u003cp\u003eMade from proprietary elastomers containing millions of nitrogen-charged micro-cells, this NitroMousse uses the Standard Platinum 10–12 PSI compound to provide a traditional feel. It is intended for all-around riding, including single track, motocross, and wide-open desert riding.\u003c\/p\u003e\u003cp\u003eThis product is identified by manufacturer part number NM19-280 and vendor part number NM19-280. The listed size range is 110\/90-120\/80-19. Confirm that this size range matches your vehicle and application before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlat-proof foam construction: Replaces a traditional pneumatic inner tube and is designed to continue performing after cuts, punctures, tears, and impacts.\u003c\/li\u003e\n\u003cli\u003eStandard Platinum compound: Uses a 10–12 PSI compound for a traditional feel.\u003c\/li\u003e\n\u003cli\u003eAll-around riding application: Suited to riding described as single track, motocross, and wide-open desert use.\u003c\/li\u003e\n\u003cli\u003eProprietary elastomer construction: Made with millions of nitrogen-charged micro-cells.\u003c\/li\u003e\n\u003cli\u003eSize range: 110\/90-120\/80-19.\u003c\/li\u003e\n\u003cli\u003eManufacturer and vendor part number: NM19-280.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nClearance Item: t\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305480745195,"sku":"626105","price":133.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/d9a57db20a4ec37d7586b426c1231434.png?v=1793265059"},{"product_id":"nuetech-tubliss-80-100-21-small-platinum-standard-nitromousse-nm21-210","title":"Nuetech TUbliss 80\/100-21 Small Platinum Standard NitroMousse NM21-210","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003eStandard Platinum 10-12 PSI Compound for a traditional feel - Best for all around riding, everything from single track to moto to wide open desert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Platinum Standard NitroMousse NM21-210 is a 100 percent flat-proof, high-performance foam inner tube designed to replace a traditional pneumatic inner tube. Its proprietary elastomer construction contains millions of nitrogen-charged micro-cells, providing a durable alternative for powersports riding.\u003c\/p\u003e\u003cp\u003eBuilt to continue performing after cuts, punctures, tears and hammer impacts, the NitroMousse helps riders finish a race or return from the trail without concern about conventional inner-tube flats. The Platinum Standard compound is designed for a traditional feel and is rated at 10–12 PSI.\u003c\/p\u003e\u003cp\u003eThis small 80\/100-21 NitroMousse is suited for all-around riding, including single track, motocross and wide-open desert riding. The manufacturer part number is NM21-210, and the vendor part number is also NM21-210. Fitment is for applications using an 80\/100-21 small inner-tube size.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlat-proof foam construction: 100 percent flat-proof design replaces a traditional pneumatic inner tube.\u003c\/li\u003e\n\u003cli\u003eDurable performance: Continues to perform after cuts, punctures, tears and hammer impacts.\u003c\/li\u003e\n\u003cli\u003eProprietary elastomers: Made with millions of nitrogen-charged micro-cells.\u003c\/li\u003e\n\u003cli\u003ePlatinum Standard compound: Provides a traditional feel at 10–12 PSI.\u003c\/li\u003e\n\u003cli\u003eVersatile riding use: Designed for single track, motocross and wide-open desert riding.\u003c\/li\u003e\n\u003cli\u003eFitment: 80\/100-21 small size.\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: NM21-210.\u003c\/li\u003e\n\u003cli\u003eVendor part number: NM21-210.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305487888619,"sku":"626106","price":133.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/b44a9b7d338985a8a784828a06a8cfa3.png?v=1793265103"},{"product_id":"nuetech-tubliss-80-100-21-90-90-21-platinum-standard-nitromousse-nm21-220","title":"Nuetech TUbliss 80\/100-21 | 90\/90-21 Platinum Standard NitroMousse NM21-220","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003eStandard Platinum 10-12 PSI Compound for a traditional feel - Best for all around riding, everything from single track to moto to wide open desert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Platinum Standard NitroMousse NM21-220 is a high-performance foam inner tube designed to replace a traditional pneumatic inner tube. Its proprietary elastomer construction contains nitrogen-charged micro-cells and is designed to remain operational after cuts, punctures, tears, and impacts.\u003c\/p\u003e\u003cp\u003eUsing the Standard Platinum 10–12 PSI compound, this NitroMousse provides a traditional riding feel for a range of powersports applications, including single-track riding, motocross, and wide-open desert terrain. The 80\/100-21 | 90\/90-21 sizing identifies the tire fitment listed by the manufacturer for this product.\u003c\/p\u003e\u003cp\u003eManufactured by Nuetech TUbliss, this foam inner tube carries the manufacturer part number NM21-220. The vendor part number is also NM21-220. Its flat-proof design is intended to help riders continue riding after common inner-tube damage, providing dependable performance for trail and race use without relying on pneumatic air pressure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Nuetech TUbliss\u003c\/li\u003e\n\u003cli\u003eModel: Platinum Standard NitroMousse\u003c\/li\u003e\n\u003cli\u003eSize: 80\/100-21 | 90\/90-21\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: NM21-220\u003c\/li\u003e\n\u003cli\u003eVendor part number: NM21-220\u003c\/li\u003e\n\u003cli\u003eFlat-proof foam inner tube designed to replace a traditional pneumatic inner tube\u003c\/li\u003e\n\u003cli\u003eProprietary elastomer construction with nitrogen-charged micro-cells\u003c\/li\u003e\n\u003cli\u003eStandard Platinum 10–12 PSI compound for a traditional feel\u003c\/li\u003e\n\u003cli\u003eSuitable for applications ranging from single-track riding to motocross and wide-open desert terrain\u003c\/li\u003e\n\u003cli\u003eDesigned to continue performing after cuts, punctures, tears, and impacts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nClearance Item: t\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305497620715,"sku":"626107","price":133.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/21c73495a4fac9d80ac49fa9d1e93598.png?v=1793265164"},{"product_id":"nuetech-tubliss-90-100-21-platinum-standard-nitromousse-nm21-235","title":"Nuetech TUbliss 90\/100-21 Platinum Standard NitroMousse NM21-235","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003eStandard Platinum 10-12 PSI Compound for a traditional feel - Best for all around riding, everything from single track to moto to wide open desert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Platinum Standard NitroMousse NM21-235 is a high-performance foam inner tube designed to replace a traditional pneumatic inner tube in a 90\/100-21 application. Its proprietary elastomer construction contains millions of nitrogen-charged micro-cells and is designed to remain flat-proof during use.\u003c\/p\u003e\u003cp\u003eBuilt to continue performing after cuts, punctures, tears and hammering, the NitroMousse provides confidence for finishing a race or returning from the trail without concern about conventional air loss. The Platinum Standard compound is rated at 10–12 PSI and delivers a traditional feel for all-around riding, including single-track, motocross and wide-open desert riding.\u003c\/p\u003e\u003cp\u003eThis product is manufactured by Nuetech TUbliss and is identified by manufacturer part number NM21-235. The vendor part number is also NM21-235. It is sized for 90\/100-21 fitment; confirm the tire and vehicle requirements before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlat-proof foam construction: Replaces a traditional pneumatic inner tube and is designed to remain functional without relying on air pressure.\u003c\/li\u003e\n\u003cli\u003eProprietary elastomer material: Made with millions of nitrogen-charged micro-cells.\u003c\/li\u003e\n\u003cli\u003eDurable performance: Designed to continue performing after cuts, punctures, tears and hammering.\u003c\/li\u003e\n\u003cli\u003ePlatinum Standard compound: Provides a traditional feel at a 10–12 PSI equivalent rating.\u003c\/li\u003e\n\u003cli\u003eAll-around riding use: Suited to single-track, motocross and wide-open desert riding.\u003c\/li\u003e\n\u003cli\u003eFitment: Designed for 90\/100-21 applications.\u003c\/li\u003e\n\u003cli\u003ePart numbers: Manufacturer and vendor part number NM21-235.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nClearance Item: t\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305503092971,"sku":"626108","price":133.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/1ec13484573db1670942405cb5de60af.png?v=1793265191"},{"product_id":"nuetech-tubliss-110-100-18-plushie-soft-nitromousse-nms18-285","title":"Nuetech TUbliss 110\/100-18 Plushie Soft NitroMousse NMS18-285","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003ePlushy Soft 6-8 PSI Compound for a soft feel - best for slower speed technical riding like endurocross, or hard enduro riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Plushie Soft NitroMousse is a high-performance foam innertube designed to replace a traditional pneumatic innertube in 110\/100-18 applications. Manufacturer part number NMS18-285 and vendor part number NMS18-285 identify this product.\u003c\/p\u003e\u003cp\u003eMade from proprietary elastomers containing millions of nitrogen-charged micro-cells, the NitroMousse is designed to remain functional after cuts, punctures, tears and impacts. Its 6–8 PSI equivalent Plushie Soft compound provides a soft feel suited to slower-speed technical riding, including endurocross and hard enduro riding.\u003c\/p\u003e\u003cp\u003eFor fitment, this NitroMousse is designated for 110\/100-18 tire applications. Verify the tire size and vehicle requirements before installation to confirm fitment.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Nuetech TUbliss\u003c\/li\u003e\n\u003cli\u003eModel: Plushie Soft NitroMousse\u003c\/li\u003e\n\u003cli\u003eSize: 110\/100-18\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: NMS18-285\u003c\/li\u003e\n\u003cli\u003eVendor part number: NMS18-285\u003c\/li\u003e\n\u003cli\u003eFlat-proof foam innertube designed to replace a traditional pneumatic innertube\u003c\/li\u003e\n\u003cli\u003eMade from proprietary elastomers with millions of nitrogen-charged micro-cells\u003c\/li\u003e\n\u003cli\u003eDesigned to continue performing after cuts, punctures, tears and impacts\u003c\/li\u003e\n\u003cli\u003e6–8 PSI equivalent Plushie Soft compound for a soft feel\u003c\/li\u003e\n\u003cli\u003eIntended for slower-speed technical riding, including endurocross and hard enduro riding\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305513840875,"sku":"626110","price":133.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/9b89f09c7d84554ee3c8b495646ecb39.png?v=1793265226"},{"product_id":"nuetech-tubliss-120-100-18-plushie-soft-nitromousse-nms18-305","title":"Nuetech TUbliss 120\/100-18 Plushie Soft NitroMousse NMS18-305","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003ePlushy Soft 6-8 PSI Compound for a soft feel - best for slower speed technical riding like endurocross, or hard enduro riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Plushie Soft NitroMousse NMS18-305 is a high-performance foam innertube designed to replace a traditional pneumatic innertube in a 120\/100-18 application. It is 100 percent flat proof and made from proprietary elastomers containing millions of nitrogen-charged micro-cells.\u003c\/p\u003e\u003cp\u003eDesigned for durability, the NitroMousse continues to perform after cuts, punctures, tears and hammering. Its extra-long-lasting construction helps provide confidence during racing or trail riding without concern about conventional innertube flats.\u003c\/p\u003e\u003cp\u003eThe Plushie Soft 6-8 PSI compound delivers a soft feel and is best suited to slower-speed technical riding, including endurocross and hard enduro riding. Manufacturer part number: NMS18-305. Vendor part number: NMS18-305. Fitment is for the stated 120\/100-18 tire size.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlat-proof foam construction: Replaces a traditional pneumatic innertube and is 100 percent flat proof.\u003c\/li\u003e\n\u003cli\u003ePlushie Soft compound: 6-8 PSI compound provides a soft feel.\u003c\/li\u003e\n\u003cli\u003eTechnical riding application: Best for slower-speed technical riding such as endurocross and hard enduro riding.\u003c\/li\u003e\n\u003cli\u003eDurable performance: Continues to perform after cuts, punctures, tears and hammering.\u003c\/li\u003e\n\u003cli\u003eConstruction: Made from proprietary elastomers with millions of nitrogen-charged micro-cells.\u003c\/li\u003e\n\u003cli\u003eFitment: Designed for the stated 120\/100-18 tire size.\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: NMS18-305.\u003c\/li\u003e\n\u003cli\u003eVendor part number: NMS18-305.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nClearance Item: t\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305520525547,"sku":"626111","price":133.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/f15392a560b37b4cf2bb441f2316253f.png?v=1793265263"},{"product_id":"nuetech-tubliss-140-80-18-plushie-soft-nitromousse-nms18-325","title":"Nuetech TUbliss 140\/80-18 Plushie Soft NitroMousse NMS18-325","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003ePlushy Soft 6-8 PSI Compound for a soft feel - best for slower speed technical riding like endurocross, or hard enduro riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Plushie Soft NitroMousse is a high-performance foam inner tube replacement designed for powersports riding. Sized for 140\/80-18 applications, this NitroMousse uses proprietary elastomers containing millions of nitrogen-charged micro-cells to provide a consistent, air-free alternative to traditional pneumatic inner tubes.\u003c\/p\u003e\u003cp\u003eBuilt to be 100 percent flat proof, the NitroMousse is designed to continue performing after cuts, punctures, tears and impacts. Its extra-long-lasting construction helps provide confidence during demanding rides, whether finishing a race or returning from the trail without concern over a flat tire.\u003c\/p\u003e\u003cp\u003eThe Plushy Soft 6-8 PSI compound delivers a soft feel and is best suited for slower-speed technical riding, including endurocross and hard enduro riding. This product is manufactured by Nuetech TUbliss and is identified by manufacturer and vendor part number NMS18-325. Fitment is for 140\/80-18 tire applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompound: Plushy Soft 6-8 PSI compound for a soft feel\u003c\/li\u003e\n\u003cli\u003eConstruction: Foam inner tube replacement made from proprietary elastomers with nitrogen-charged micro-cells\u003c\/li\u003e\n\u003cli\u003eFlat Protection: 100 percent flat proof design that continues performing after cuts, punctures, tears and impacts\u003c\/li\u003e\n\u003cli\u003eRiding Application: Best suited for slower-speed technical riding, including endurocross and hard enduro riding\u003c\/li\u003e\n\u003cli\u003eFitment: Designed for 140\/80-18 tire applications\u003c\/li\u003e\n\u003cli\u003ePart Number: NMS18-325\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nClearance Item: t\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305528455403,"sku":"626112","price":133.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/1050ab5854f2acf2faecd87e07638133.png?v=1793265308"},{"product_id":"nuetech-tubliss-80-100-21-90-90-21-plushie-soft-nitromousse-nms21-220","title":"Nuetech TUbliss 80\/100-21 | 90\/90-21 Plushie Soft NitroMousse NMS21-220","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003ePlushy Soft 6-8 PSI Compound for a soft feel - best for slower speed technical riding like endurocross, or hard enduro riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Plushie Soft NitroMousse NMS21-220 is a high-performance foam innertube designed to replace traditional pneumatic innertubes. Its 80\/100-21 | 90\/90-21 sizing provides fitment for applications using either of these listed tire sizes.\u003c\/p\u003e\u003cp\u003eMade from proprietary elastomers with millions of nitrogen-charged micro-cells, this NitroMousse is designed to remain functional after cuts, punctures, tears and hammering. The 100 percent flat-proof construction helps provide confidence while riding, without concern for conventional air loss from a punctured pneumatic innertube.\u003c\/p\u003e\u003cp\u003eThe Plushie Soft 6-8 PSI compound delivers a soft feel and is best suited for slower-speed technical riding, including endurocross and hard enduro riding. The manufacturer part number is NMS21-220, and the vendor part number is also NMS21-220.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlat-proof foam innertube: Replaces a traditional pneumatic innertube and is designed to continue performing after cuts, punctures, tears and hammering.\u003c\/li\u003e\n\u003cli\u003ePlushie Soft compound: 6-8 PSI equivalent compound provides a soft feel.\u003c\/li\u003e\n\u003cli\u003eTechnical riding fitment: Best suited for slower-speed technical riding such as endurocross and hard enduro riding.\u003c\/li\u003e\n\u003cli\u003eFoam construction: Made from proprietary elastomers containing millions of nitrogen-charged micro-cells.\u003c\/li\u003e\n\u003cli\u003eSize fitment: 80\/100-21 and 90\/90-21.\u003c\/li\u003e\n\u003cli\u003ePart number: NMS21-220.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305536712939,"sku":"626113","price":133.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/a0650f2697d0594c03f1e1c55e3fa045.png?v=1793265350"},{"product_id":"nuetech-tubliss-90-100-21-plushie-soft-nitromousse-nms21-235","title":"Nuetech TUbliss 90\/100-21 Plushie Soft NitroMousse NMS21-235","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003ePlushy Soft 6-8 PSI Compound for a soft feel - best for slower speed technical riding like endurocross, or hard enduro riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Plushie Soft NitroMousse 90\/100-21 is a high-performance foam innertube designed to replace traditional pneumatic innertubes. Manufacturer part number NMS21-235; vendor part number NMS21-235.\u003c\/p\u003e\u003cp\u003eThis NitroMousse is 100 percent flat proof and made from proprietary elastomers containing millions of nitrogen-charged micro-cells. Its construction continues to perform after cuts, punctures, tears and hammering, helping riders complete races or return from the trail without concern about conventional tube flats.\u003c\/p\u003e\u003cp\u003eThe Plushie Soft 6–8 PSI compound provides a soft feel and is best suited to slower-speed technical riding, including endurocross and hard enduro riding. Fitment is for applications using a 90\/100-21 size innertube. Verify the vehicle and wheel application before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompound: Plushie Soft 6–8 PSI compound provides a soft feel.\u003c\/li\u003e\n\u003cli\u003eConstruction: Made from proprietary elastomers with millions of nitrogen-charged micro-cells.\u003c\/li\u003e\n\u003cli\u003eFlat protection: 100 percent flat proof and designed to continue performing after cuts, punctures, tears and hammering.\u003c\/li\u003e\n\u003cli\u003eRiding application: Best for slower-speed technical riding such as endurocross and hard enduro riding.\u003c\/li\u003e\n\u003cli\u003eFitment: Designed for 90\/100-21 innertube applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305540808939,"sku":"626114","price":133.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/436b9e21ea0e2ba9740f6d31c9c7f205.png?v=1793265372"},{"product_id":"nuetech-tubliss-110-100-18-plushie-soft-nitrowedge-nws-285","title":"Nuetech TUbliss 110\/100-18 Plushie Soft NitroWedge NWS-285","description":"NITROWEDGE is an 8\" section of a mousse that can be added to your NITROMOUSSE to increase the PSI feel. Can be used to extend the life of a NITROMOUSSE with many hours on it.\n\u003cul\u003e\n  \u003cli\u003ePlushy Soft 6-8 PSI Compound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss NitroWedge NWS-285 is an 8-inch section of mousse designed to be added to a NITROMOUSSE. Its Plushy Soft 6–8 PSI compound can increase the PSI feel and may help extend the service life of a NITROMOUSSE with many hours of use.\u003c\/p\u003e\u003cp\u003eThis NitroWedge is sized for the 110\/100-18 application listed by the manufacturer. Manufacturer part number: NWS-285. Vendor part number: NWS-285. Fitment is based on the stated 110\/100-18 size; verify that your NITROMOUSSE and wheel application match this size before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Nuetech TUbliss\u003c\/li\u003e\n\u003cli\u003eModel: NitroWedge\u003c\/li\u003e\n\u003cli\u003eSize: 110\/100-18\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: NWS-285\u003c\/li\u003e\n\u003cli\u003eVendor part number: NWS-285\u003c\/li\u003e\n\u003cli\u003eConstruction: 8-inch section of mousse\u003c\/li\u003e\n\u003cli\u003eCompound: Plushy Soft 6–8 PSI\u003c\/li\u003e\n\u003cli\u003eApplication: Adds to a NITROMOUSSE to increase the PSI feel\u003c\/li\u003e\n\u003cli\u003eService-life support: Can be used to extend the life of a NITROMOUSSE with many hours on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305549590763,"sku":"626123","price":18.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5d0f4a0109c2214f88ff0d76e826b905.png?v=1793265405"},{"product_id":"nuetech-tubliss-gen-2-0-18-inch-kit-tu18","title":"Nuetech TUbliss Gen 2.0 18-Inch Kit TU18","description":"The Nuetech Tubliss 2.0 Kit replaces conventional inner tubes with a small red insert that creates two different pressure zones inside the tire itself. This enables an incredible 100 PSI of rim protection, increased tire stability, and eliminates pinch flats. The Tubliss system also allows you to run much lower tire pressures than you normally would with a standard tube. The lower tire pressure creates a larger contact patch, leading to greatly improved traction and a plusher ride.\n\u003cul\u003e\n  \u003cli\u003eMassive Traction Gains\u003c\/li\u003e\n  \u003cli\u003eTrack and Trail Proven\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Gen 2.0 18-Inch Kit, manufacturer part number TU18 and vendor part number TU18, replaces a conventional inner tube with a small red insert that creates two separate pressure zones inside the tire. This design provides up to 100 PSI of rim protection, increased tire stability, and helps eliminate pinch flats.\u003c\/p\u003e\u003cp\u003eThe TUbliss system allows substantially lower tire pressures than a standard tube, creating a larger contact patch for improved traction and a plusher ride. The system is track and trail proven and is designed for powersports tire applications requiring enhanced traction, stability, and rim protection.\u003c\/p\u003e\u003cp\u003eFitment: Intended for 18-inch powersports tire applications. Verify tire and wheel fitment before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo pressure zones: The red insert creates separate high- and low-pressure areas inside the tire.\u003c\/li\u003e\n\u003cli\u003eRim protection: Provides up to 100 PSI of rim protection.\u003c\/li\u003e\n\u003cli\u003ePinch-flat prevention: Helps eliminate pinch flats associated with conventional inner tubes.\u003c\/li\u003e\n\u003cli\u003eImproved traction: Lower tire pressures create a larger contact patch for increased traction.\u003c\/li\u003e\n\u003cli\u003eEnhanced ride: Lower operating pressures contribute to a plusher ride.\u003c\/li\u003e\n\u003cli\u003eIncreased stability: Helps improve tire stability during track and trail use.\u003c\/li\u003e\n\u003cli\u003eTrack and trail proven: Designed for powersports applications used on tracks and trails.\u003c\/li\u003e\n\u003cli\u003e18-inch application: Intended for 18-inch powersports tires.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305555718379,"sku":"626125","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/ad95bbeec3b47d6b0a9a1d4b1823e85b.jpg?v=1793265437"},{"product_id":"nuetech-tubliss-gen-2-0-21-in-kit-tu21","title":"Nuetech TUbliss Gen 2.0 21 in Kit TU21","description":"The Nuetech Tubliss 2.0 Kit replaces conventional inner tubes with a small red insert that creates two different pressure zones inside the tire itself. This enables an incredible 100 PSI of rim protection, increased tire stability, and eliminates pinch flats. The Tubliss system also allows you to run much lower tire pressures than you normally would with a standard tube. The lower tire pressure creates a larger contact patch, leading to greatly improved traction and a plusher ride.\n\u003cul\u003e\n  \u003cli\u003eTrack and Trail Proven\u003c\/li\u003e\n  \u003cli\u003eMassive Traction Gains\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Gen 2.0 21 in Kit replaces a conventional inner tube with a red insert that creates two separate pressure zones inside the tire. This design provides up to 100 PSI of rim protection, increased tire stability and protection against pinch flats.\u003c\/p\u003e\u003cp\u003eBy allowing lower tire pressures than a standard tube, the TUbliss system creates a larger tire contact patch for improved traction and a plusher ride. The system is track and trail proven and is designed for powersports applications requiring enhanced traction, stability and rim protection.\u003c\/p\u003e\u003cp\u003eManufacturer part number: TU21. Vendor part number: TU21. Fitment: 21-inch tire applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePressure Zones: Red insert creates two separate pressure zones inside the tire.\u003c\/li\u003e\n\u003cli\u003eRim Protection: Provides up to 100 PSI of rim protection.\u003c\/li\u003e\n\u003cli\u003ePinch Flat Protection: Eliminates pinch flats.\u003c\/li\u003e\n\u003cli\u003eTraction: Supports lower tire pressures for a larger contact patch and improved traction.\u003c\/li\u003e\n\u003cli\u003eRide Quality: Lower tire pressure can provide a plusher ride.\u003c\/li\u003e\n\u003cli\u003eProven Performance: Track and trail proven.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305568071915,"sku":"626126","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/ad95bbeec3b47d6b0a9a1d4b1823e85b_add8b3db-416b-46be-a2ef-eb5df6ede891.jpg?v=1793265463"},{"product_id":"nuetech-tubliss-front-deflector-3-18-in-model-df1","title":"Nuetech TUbliss Front Deflector 3.18 in Model DF1","description":"The Nuetech TUbliss Front Deflector is a replacement component for the TUbliss Gen 2.0 system. This small rubber piece plays a crucial role in sealing and protecting the high-pressure bladder system, ensuring optimal performance and durability.\n\u003cp\u003eThe Nuetech TUbliss Front Deflector, model DF1, is a replacement component for the TUbliss Gen 2.0 system. This compact rubber piece helps seal and protect the high-pressure bladder system, supporting proper system performance and durability.\u003c\/p\u003e\u003cp\u003eDesigned for use with the Nuetech TUbliss Gen 2.0 system, the front deflector is intended as a replacement part for the applicable TUbliss assembly. Verify system generation and application before ordering to confirm fitment. The manufacturer part number is DF1, and the vendor part number is DF1.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacement front deflector for the Nuetech TUbliss Gen 2.0 system\u003c\/li\u003e\n\u003cli\u003eRubber construction helps seal and protect the high-pressure bladder system\u003c\/li\u003e\n\u003cli\u003eSupports TUbliss system performance and durability\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: DF1\u003c\/li\u003e\n\u003cli\u003eVendor part number: DF1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nRegular Stock: false\u003cbr\u003e\nUnits Per Sku: 1\u003cbr\u003e\nClearance Item: t","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305577279723,"sku":"745377","price":4.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/169bbd28a0c9470e9f73e1e5154adc21.png?v=1793265495"},{"product_id":"nuetech-tubliss-21-inch-bladder-only-ib21","title":"Nuetech TUbliss 21-Inch Bladder Only IB21","description":"Replacement bladder for the Nuetech TUbliss system.\n\u003cp\u003eThe Nuetech TUbliss 21-Inch Bladder Only is a replacement bladder for the Nuetech TUbliss system. Designed for use with the 21-inch TUbliss setup, this replacement component helps restore the system when the original bladder requires replacement.\u003c\/p\u003e\u003cp\u003eThis powersports replacement bladder is identified by manufacturer part number IB21 and vendor part number IB21. The product is supplied as a bladder only, making it suitable for replacing the bladder component of an existing Nuetech TUbliss system. Confirm the size and part number against your current system before ordering to help ensure the correct fitment.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProduct Type: Replacement bladder for the Nuetech TUbliss system\u003c\/li\u003e\n\u003cli\u003eFitment: Designed for the 21-inch Nuetech TUbliss setup\u003c\/li\u003e\n\u003cli\u003eBrand: Nuetech TUbliss\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: IB21\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: IB21\u003c\/li\u003e\n\u003cli\u003eIncluded Component: Bladder only\u003c\/li\u003e\n\u003cli\u003eApplication: Powersports\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305583145195,"sku":"745379","price":13.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/4fbade01d6797871b0cfb49bae79fac7.jpg?v=1793265529"},{"product_id":"nuetech-tubliss-140-100-18-platinum-standard-nitromousse-nm18-345","title":"Nuetech TUbliss 140\/100-18 Platinum Standard NitroMousse NM18-345","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003eStandard Platinum 10-12 PSI Compound for a traditional feel - Best for all around riding, everything from single track to moto to wide open desert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Platinum Standard NitroMousse NM18-345 is a high-performance foam innertube designed for powersports use in a 140\/100-18 size. It replaces a traditional pneumatic innertube with a foam construction that remains functional after cuts, punctures, tears and impacts, helping riders maintain confidence through demanding riding conditions.\u003c\/p\u003e\u003cp\u003eThis NitroMousse uses proprietary elastomers containing millions of nitrogen-charged micro-cells. The Platinum Standard compound delivers a traditional feel equivalent to approximately 10–12 PSI and is intended for all-around riding, including single-track, motocross and wide-open desert terrain.\u003c\/p\u003e\u003cp\u003eManufacturer and vendor part number: NM18-345. Brand: Nuetech TUbliss. Size: 140\/100-18. This product is intended to fit applications designed for a 140\/100-18 innertube; verify vehicle and wheel fitment before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlat-proof foam construction: Replaces a traditional pneumatic innertube and continues to perform after cuts, punctures, tears and impacts.\u003c\/li\u003e\n\u003cli\u003ePlatinum Standard compound: Provides a traditional feel equivalent to approximately 10–12 PSI.\u003c\/li\u003e\n\u003cli\u003eProprietary elastomer material: Made with millions of nitrogen-charged micro-cells.\u003c\/li\u003e\n\u003cli\u003eAll-around riding use: Suitable for single-track, motocross and wide-open desert riding.\u003c\/li\u003e\n\u003cli\u003eSize: 140\/100-18.\u003c\/li\u003e\n\u003cli\u003eManufacturer and vendor part number: NM18-345.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305593172203,"sku":"745382","price":133.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/dde36263776cfa53b4dd949b8aa9e20b.png?v=1793265568"},{"product_id":"nuetech-tubliss-85g-nitrolube-cooling-gel-nmlube-85","title":"Nuetech TUbliss 85G Nitrolube Cooling Gel NMLUBE 85","description":"Nitromousse are 100 PERCENT FLAT PROOF, high performance extra long lasting foam innertubes that replace traditional pneumatic innertubes. Cut, puncture, tear, and hammer the Nitromousse and it will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. Made from proprietary elastomers that have millions of nitrogen charged micro-cells.\n\u003cul\u003e\n  \u003cli\u003eStandard Platinum 10-12 PSI Compound for a traditional feel - Best for all around riding, everything from single track to moto to wide open desert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNuetech TUbliss Nitrolube Cooling Gel is supplied in an 85-gram tube under manufacturer part number NMLUBE 85 and vendor part number NMLUBE 85. This product is associated with Nuetech TUbliss powersports products and is designed as a cooling gel for use with the TUbliss system.\u003c\/p\u003e\u003cp\u003eFitment is for Nuetech TUbliss applications. The provided product data does not identify specific vehicle makes, models, years, tire sizes, or other detailed fitment information, so verify application requirements before purchase.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Nuetech TUbliss\u003c\/li\u003e\n\u003cli\u003eProduct: Nitrolube Cooling Gel\u003c\/li\u003e\n\u003cli\u003eSize: 85 grams\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: NMLUBE 85\u003c\/li\u003e\n\u003cli\u003eVendor part number: NMLUBE 85\u003c\/li\u003e\n\u003cli\u003eFitment: Nuetech TUbliss applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305599955179,"sku":"745383","price":5.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/ecc00c174c466cc1232ed7cd6f91a66c.jpg?v=1793265593"},{"product_id":"nuetech-tubliss-gen-2-0-19-in-kit-tu19","title":"Nuetech TUbliss Gen 2.0 19 in Kit TU19","description":"The Nuetech Tubliss 2.0 Kit replaces conventional inner tubes with a small red insert that creates two different pressure zones inside the tire itself. This enables an incredible 100 PSI of rim protection, increased tire stability, and eliminates pinch flats. The Tubliss system also allows you to run much lower tire pressures than you normally would with a standard tube. The lower tire pressure creates a larger contact patch, leading to greatly improved traction and a plusher ride.\n\u003cul\u003e\n  \u003cli\u003eTrack and Trail Proven\u003c\/li\u003e\n  \u003cli\u003eMassive Traction Gains\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss Gen 2.0 19 in Kit, manufacturer part number TU19 and vendor part number TU19, replaces a conventional inner tube with a small red insert that creates two separate pressure zones inside the tire. This system is designed to provide up to 100 PSI of rim protection, increased tire stability, and resistance to pinch flats.\u003c\/p\u003e\u003cp\u003eThe TUbliss system allows operation at lower tire pressures than a standard tube, creating a larger contact patch for improved traction and a plusher ride. This 19 in kit is track and trail proven and is designed for powersports applications where traction, rim protection, and tire stability are important.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePressure Zones: Creates two different pressure zones inside the tire.\u003c\/li\u003e\n\u003cli\u003eRim Protection: Provides up to 100 PSI of rim protection.\u003c\/li\u003e\n\u003cli\u003ePinch Flat Protection: Eliminates pinch flats associated with conventional inner tubes.\u003c\/li\u003e\n\u003cli\u003eTraction: Lower tire pressures create a larger contact patch for improved traction.\u003c\/li\u003e\n\u003cli\u003eRide Quality: Supports a plusher ride through lower tire pressures.\u003c\/li\u003e\n\u003cli\u003eStability: Increases tire stability.\u003c\/li\u003e\n\u003cli\u003eApplication: 19 in powersports kit for track and trail use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305605624043,"sku":"745395","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/ad95bbeec3b47d6b0a9a1d4b1823e85b_2873ab80-0244-488e-9e52-f918c4a00c19.jpg?v=1793265619"},{"product_id":"nuetech-tubliss-18-inch-5150-platinum-half-nitromousse-nm-5150-18","title":"Nuetech TUbliss 18-Inch 5150 Platinum Half-NitroMousse NM-5150-18","description":"Designed to work with the TUBLISS system to provide even more protection and substantially increase stability allowing you to run extremely low (or zero) PSI for traction gains.\n\u003cul\u003e\n  \u003cli\u003eChanneled crown allows for use with sealant and provides a more progressive feel\u003c\/li\u003e\n  \u003cli\u003eIncludes NitroLube for added durability\u003c\/li\u003e\n  \u003cli\u003eFits 18\" tires size 110-140\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss 5150 Platinum Half-NitroMousse is designed to work with the TUbliss system, providing additional protection and increased stability. It allows riders to run extremely low or zero PSI for improved traction.\u003c\/p\u003e\u003cp\u003eThe channeled crown is designed for use with sealant and provides a more progressive feel. The Half-NitroMousse includes NitroLube to support added durability.\u003c\/p\u003e\u003cp\u003eThis product fits 18-inch tires in sizes 110-140. Manufacturer part number: NM-5150-18. Vendor part number: NM-5150-18.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTUbliss system compatibility: Designed to work with the TUbliss system for added protection and stability.\u003c\/li\u003e\n\u003cli\u003eLow-pressure traction: Allows use at extremely low or zero PSI for traction gains.\u003c\/li\u003e\n\u003cli\u003eChanneled crown: Supports use with sealant and provides a more progressive feel.\u003c\/li\u003e\n\u003cli\u003eNitroLube included: Includes NitroLube for added durability.\u003c\/li\u003e\n\u003cli\u003eFitment: Fits 18-inch tires in sizes 110-140.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305614700779,"sku":"831628","price":122.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6958c3f94f8a7d3a51f5f83bc329966bL.jpg?v=1793265646"},{"product_id":"nuetech-tubliss-18-in-5150-plushie-half-nitromousse-nms-5150-18","title":"Nuetech TUbliss 18 in 5150 Plushie Half-NitroMousse NMS-5150-18","description":"Designed to work with the TUBLISS system to provide even more protection and substantially increase stability allowing you to run extremely low (or zero) PSI for traction gains.\n\u003cul\u003e\n  \u003cli\u003eChanneled crown allows for use with sealant and provides a more progressive feel\u003c\/li\u003e\n  \u003cli\u003eIncludes NitroLube for added durability\u003c\/li\u003e\n  \u003cli\u003eFits 18\" tires size 110-140\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Nuetech TUbliss 5150 Plushie Half-NitroMousse is designed to work with the TUBLISS system, providing additional protection and increased stability for low- or zero-PSI riding applications. Its channeled crown accommodates sealant and delivers a more progressive feel.\u003c\/p\u003e\u003cp\u003eThis half-NitroMousse includes NitroLube to support added durability. It fits 18-inch tires in sizes 110–140. Manufacturer and vendor part number: NMS-5150-18. Brand: Nuetech TUbliss. Model: 5150 Plushie Half-NitroMousse. Fitment: 18-inch tires, sizes 110–140, when used with the TUBLISS system.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTUBLISS System Compatibility: Designed to work with the TUBLISS system.\u003c\/li\u003e\n\u003cli\u003eAdded Protection and Stability: Provides additional protection and substantially increases stability for extremely low- or zero-PSI use.\u003c\/li\u003e\n\u003cli\u003eChanneled Crown: Allows use with sealant and provides a more progressive feel.\u003c\/li\u003e\n\u003cli\u003eNitroLube Included: Includes NitroLube for added durability.\u003c\/li\u003e\n\u003cli\u003eTire Fitment: Fits 18-inch tires in sizes 110–140.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\nAir Freight Prohibited: false\u003cbr\u003e\nNot Carb Approved: false\u003cbr\u003e\nCarb Acknowledgement Required: false\u003cbr\u003e\nLtl Freight Required: false\u003cbr\u003e\nProp 65: Unknown\u003cbr\u003e\nPart Type: powersports\u003cbr\u003e\nEpa: N\/A\u003cbr\u003e\nRegular Stock: t\u003cbr\u003e\nUnits Per Sku: 1","brand":"Nuetech TUbliss","offers":[{"title":"Default Title","offer_id":68305626136811,"sku":"831629","price":127.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6a38edef070a2fbf666a1e92b8a49bd4L.jpg?v=1793265686"}],"url":"https:\/\/ctracingservices.com\/collections\/tubliss.oembed","provider":"Cascade Tire \u0026 Racing Services","version":"1.0","type":"link"}