{"title":"Alpinestars SM3 Helmets","description":null,"products":[{"product_id":"alpinestars-sm3-helmet-falcon-purple-white-black-pink-fluo-2xl-8300927-3222-2x","title":"ALPINESTARS SM3 Helmet - Falcon - Purple\/White\/Black\/Pink Fluo - 2XL 8300927-3222-2X","description":"\u003cp\u003eSM3 Helmet - Falcon - Purple\/White\/Black\/Pink Fluo - 2XL\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388906053867,"sku":"01109822","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137668.png?v=1789036903"},{"product_id":"alpinestars-sm3-helmet-falcon-purple-white-black-pink-fluo-medium-8300927-3222-m","title":"Alpinestars SM3 Helmet Falcon Purple\/White\/Black\/Pink Fluo Medium 8300927-3222-M","description":"SM3 Helmet - Falcon - Purple\/White\/Black\/Pink Fluo - Medium\n\u003cp\u003eThe Alpinestars SM3 Helmet in Falcon Purple\/White\/Black\/Pink Fluo is designed for motocross, enduro, and off-road riders who need dependable impact protection, comfort, and ventilation. This medium helmet features a thermo-injected shell made from an impact-resistant thermoplastic polymer blend with varied thicknesses to help optimize strength and weight. The chin area is engineered for effective impact performance, while the overall construction delivers a balanced combination of protection and rider comfort. Alpinestars manufacturer part number 8300927-3222-M is also provided as the vendor part number for accurate product identification.\u003cbr\u003eThe SM3 uses a composite fiber layer positioned between the outer shell and the EPS liner to help enhance impact protection. Its six-piece, multi-density EPS liner uses five distinct densities to manage impact energy in targeted areas while helping reduce overall helmet weight. A low-friction coating on the inner EPS surface is designed to reduce friction between the liner and comfort padding, helping manage rotational forces associated with certain oblique impacts. The crown and cheek pads can be tailored to the rider’s head for a more personalized fit, and the removable cheek pads support easier helmet removal when needed.\u003cbr\u003eTen intake ports and seven exhaust ports promote airflow and heat exchange during demanding rides, while the visor is shaped to direct air toward the ventilation channels. The visor release system is engineered to release at a predetermined force to help reduce stress on the rider’s neck during an impact. Additional convenience and safety features include integrated hydration tube channels in the cheek pads, a soft 25 mm chin strap, secure stainless steel D-rings, and an Emergency Release System. The comfort liner uses recycled materials, supporting a lower-impact construction approach. Designed to fit adult riders seeking a medium off-road helmet, this Alpinestars SM3 combines practical adjustability, ventilation, and advanced protection for motocross, enduro, and trail applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAlpinestars SM3 off-road helmet in Medium sizing with Falcon Purple\/White\/Black\/Pink Fluo graphics\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThermo-injected impact-resistant thermoplastic outer shell with varied thickness construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComposite fiber layer positioned between the outer shell and EPS liner for added impact protection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSix-piece EPS liner with five densities for targeted impact absorption and weight management\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLow-friction EPS coating designed to help manage rotational forces during oblique impacts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable crown and cheek pads provide a more tailored rider fit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTen intake ports and seven exhaust ports support airflow and heat transfer\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor directs air into the ventilation ports and includes a predetermined-force release system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemovable cheek pads and Emergency Release System support safer helmet removal\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntegrated hydration tube channels add convenience for motocross, enduro, and off-road riding\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSoft textile chin strap with stainless steel D-rings provides secure, comfortable retention\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eManufacturer and vendor part number: 8300927-3222-M\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388906250475,"sku":"01109819","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137658.png?v=1789036923"},{"product_id":"alpinestars-sm3-falcon-helmet-red-fluo-white-blue-yellow-fluo-small-8300927-3206-s","title":"Alpinestars SM3 Falcon Helmet Red Fluo\/White\/Blue\/Yellow Fluo Small 8300927-3206-S","description":"SM3 Helmet - Falcon - Red Fluo\/White\/Blue\/Yellow Fluo - Small\n\u003cp\u003eThe Alpinestars SM3 Falcon Helmet combines advanced impact protection, lightweight performance, and rider-focused comfort for motocross, enduro, and off-road applications. Finished in Red Fluo, White, Blue, and Yellow Fluo, this Small helmet features a thermo-injected shell made from an impact-resistant thermoplastic polymer blend with varied thicknesses. This construction is engineered to provide an effective balance of protection and reduced weight for demanding off-road riding. The manufacturer and vendor part number for this helmet is 8300927-3206-S.\u003cbr\u003eThe SM3 helmet uses a composite fiber layer between the outer shell and EPS liner to enhance impact protection. A six-piece, multi-density EPS liner uses five specific densities to help manage impact energy and optimize internal volume. The polished EPS surface includes a low-friction coating designed to reduce friction between the comfort liner and EPS, helping manage rotational forces associated with certain oblique impacts. The inner and outer surfaces are engineered to help minimize the effects of angled impacts. A visor release system is designed to release at a predetermined force, helping reduce forces transferred to the rider’s neck during an impact.\u003cbr\u003eVentilation is supported by ten intake ports and seven exhaust ports, while the visor directs airflow into the helmet for improved heat transfer. The fit can be adjusted with the crown and cheek pads, and removable cheek pads support easier helmet removal in an emergency. An Emergency Release System, 3D-contoured comfort foam, and an optimized chin area add further protection and comfort. The comfort liner uses recycled materials, while integrated hydration tube channels in the cheek pads improve convenience during extended rides. A soft 25 mm textile chin strap and stainless steel D-rings provide a secure, comfortable fit. The Alpinestars SM3 Small helmet is designed for riders seeking dependable protection and ventilation for MX, enduro, and off-road use.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVaried-thickness thermo-injected shell balances impact protection and lightweight performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComposite fiber layer between the outer shell and EPS liner enhances impact protection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSix-piece EPS liner with five densities helps manage impact energy and internal volume\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLow-friction EPS coating helps reduce rotational forces during certain oblique impacts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTen intake ports and seven exhaust ports provide high levels of ventilation and heat transfer\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor release system is designed to release at a predetermined force during an impact\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable crown and cheek pads help tailor the fit to the rider’s head\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEmergency Release System and removable cheek pads support safer helmet removal\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRecycled-material comfort liner helps reduce environmental impact\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntegrated hydration tube channels improve convenience during extended rides\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSoft 25 mm textile chin strap and stainless steel D-rings provide a secure fit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for motocross, enduro, and off-road riding\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eModel: SM3 Falcon\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSize: Small\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eManufacturer and vendor part number: 8300927-3206-S\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388906414315,"sku":"01109812","price":309.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137653.png?v=1789036942"},{"product_id":"alpinestars-sm3-helmet-radium-red-red-fluo-white-xl-8300826-3216-xl","title":"Alpinestars SM3 Helmet Radium Red\/Red Fluo\/White XL 8300826-3216-XL","description":"SM3 Helmet - Radium - Red\/Red Fluo\/White - XL\n\u003cp\u003eTen intake ports and seven exhaust ports promote airflow and heat exchange, while the visor is shaped to direct air into the ventilation channels. The visor release system is designed to release at a predetermined force to help reduce forces transferred to the rider’s neck during an impact. Integrated hydration tube channels in the cheek pads add convenience for extended rides. A soft textile chin strap, secure stainless steel D-rings, and an Emergency Release System complete the practical safety-focused design. The Alpinestars SM3 Helmet fits riders seeking reliable protection and adjustable comfort for MX, enduro, and off-road applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eShell Construction: Thermo-injected polymer shell with varied thicknesses for an optimized balance of impact protection and light weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eImpact Protection: Lightweight impact-resistant thermoplastic outer shell combines with a composite fiber layer and EPS liner.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMulti-Density EPS: Six-piece liner with five densities helps manage impact energy in targeted areas.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRotational Impact Management: Low-friction coating helps reduce friction and rotational acceleration during certain oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVentilation: Ten intake ports and seven exhaust ports support airflow and heat transfer through the helmet.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor Release System: Designed to release at a predetermined force to help reduce forces on the rider’s neck during an impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable Fit: Removable crown and cheek pads allow the fit to be tailored to the rider.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEmergency Release: Removable cheek pads support safer, easier helmet removal while the helmet is being worn.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHydration Integration: Cheek-pad channels accommodate a hydration tube for added riding convenience.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eChin Strap: Soft textile strap and stainless steel D-rings provide secure, comfortable retention.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for motocross, enduro, and off-road riding.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: Alpinestars manufacturer and vendor part number 8300826-3216-XL.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388906610923,"sku":"01109809","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137635.png?v=1789036960"},{"product_id":"alpinestars-sm3-radium-helmet-red-red-fluo-white-small-8300826-3216-s","title":"Alpinestars SM3 Radium Helmet Red\/Red Fluo\/White Small 8300826-3216-S","description":"SM3 Helmet - Radium - Red\/Red Fluo\/White - Small\n\u003cp\u003eThe Alpinestars SM3 Helmet in Small is designed for motocross, enduro, and off-road riding, combining impact protection, lightweight performance, and rider comfort. Finished in Radium Red, Red Fluo, and White, this helmet features a thermo-injected shell made from an impact-resistant thermoplastic polymer blend with varied thicknesses. This construction is engineered to provide an effective balance of protection and reduced weight for demanding off-road use. The manufacturer and vendor part number is 8300826-3216-S.\u003cbr\u003eThe SM3 helmet uses an inner composite-fiber shell positioned between the outer shell and the EPS liner for added impact protection. Its six-piece EPS liner incorporates five densities to help manage impact energy in specific areas while maintaining a streamlined design. A polished EPS surface with a low-friction coating helps reduce friction between the liner and comfort padding, supporting rotational impact management during certain oblique impacts. The engineered inner and outer surfaces are designed to help minimize the effects of angled impacts.\u003cbr\u003eVentilation is supported by ten intake ports and seven exhaust ports, while the visor directs airflow into the helmet for enhanced heat transfer and rider comfort. The visor release system is designed to release at a predetermined force, helping reduce forces transferred to the rider’s neck during an impact. The removable comfort liner uses recycled materials, and integrated hydration tube channels in the cheek pads provide convenient routing for hydration systems. A soft textile chin strap with stainless steel D-rings provides a secure, comfortable fit.\u003cbr\u003eFor added protection and serviceability, the Alpinestars SM3 includes an Emergency Release System and removable cheek pads that can be taken out while the helmet remains on the rider. Three-dimensional contoured cheek-pad foam improves comfort, while the chin area is optimized for impact performance. The crown and cheek pads allow the fit to be tailored to the rider’s head. This Small Alpinestars SM3 off-road helmet is supplied under manufacturer model SM3 and part number 8300826-3216-S, making it suitable for riders seeking advanced protection and ventilation for motocross, enduro, and off-road applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eShell Construction: Thermo-injected impact-resistant thermoplastic shell with varied thicknesses for a balance of protection and lightweight performance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOff-Road\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388907167979,"sku":"01109806","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137634.png?v=1789036978"},{"product_id":"alpinestars-youth-sm3-helmet-falcon-red-fluo-white-blue-yellow-fluo-small-8301327-3206-ys","title":"Alpinestars Youth SM3 Helmet Falcon Red Fluo\/White\/Blue\/Yellow Fluo Small 8301327-3206-YS","description":"Youth SM3 Helmet - Falcon - Red Fluo\/White\/Blue\/Yellow Fluo - Small\n\u003cp\u003eThe Alpinestars Youth SM3 Helmet in Falcon Red Fluo, White, Blue, and Yellow Fluo is designed for young off-road riders who need dependable impact protection, a lightweight feel, and a comfortable fit. Its thermo-injected shell uses a specially developed polymer blend with varying thicknesses to help optimize protection and weight. The lightweight thermoplastic outer shell works with a multiple-density inner liner to provide appropriate impact absorption in key areas while helping reduce overall helmet weight. Manufacturer and vendor part number 8301327-3206-YS identifies this Small-size youth helmet.\u003cbr\u003eThe Youth SM3 is engineered to help manage the effects of oblique impacts through carefully developed inner and outer surfaces. A low-friction coating on the main EPS liner creates a slip plane intended to reduce rotational acceleration forces during certain angled impacts. The visor release system is designed to release at a predetermined force, helping reduce forces transmitted to the rider’s neck during an impact. Stainless steel D-rings provide a secure closure, while the 25 mm soft textile chin strap supports both safety and comfort during extended rides.\u003cbr\u003eVentilation is maximized through ten intake ports and seven exhaust ports, with the visor shaped to direct airflow into the helmet for improved heat transfer. Recycled materials are used in the comfort liner to help reduce the product’s environmental impact. Integrated hydration tube channels in the cheek pads add convenience for riders who use hydration systems. Fit can be personalized with interchangeable crown and cheek pads available in different thicknesses, while the removable cheek pads and Emergency Release System support safer helmet removal after an incident. The 3D-contoured cheek pad foam helps maintain a comfortable, secure fit for youth riders. The Alpinestars Youth SM3 is a purpose-built off-road helmet for young riders seeking adjustable comfort, ventilation, and advanced protective features in a Small fit.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThermo-injected shell: Special polymer blend with varying thicknesses helps balance impact protection and lightweight performance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eImpact-resistant thermoplastic construction: Lightweight outer shell is engineered for dependable off-road protection.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMultiple-density inner liner: Uses targeted densities to enhance impact absorption while helping reduce overall weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLow-friction EPS coating: Slip-plane design helps reduce rotational acceleration forces from certain oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable fit system: Interchangeable crown and cheek pads in different thicknesses allow the fit to be tailored to the rider.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVentilation system: Ten intake ports and seven exhaust ports promote airflow and heat transfer.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor release system: Predetermined release force helps reduce forces on the rider’s neck during an impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRecycled comfort liner: Uses recycled materials to help lower the product’s environmental footprint.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHydration tube channels: Integrated into the cheek pads for convenient hydration-system routing.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEmergency Release System: Removable cheek pads support safer and easier helmet removal after an incident.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSecure fastening: Soft 25 mm textile chin strap and stainless steel D-rings provide a comfortable, secure fit.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eYouth off-road\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388907561195,"sku":"01111824","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137615.png?v=1789036996"},{"product_id":"alpinestars-sm3-helmet-falcon-blue-white-black-pink-fluo-2xl-part-number-8300927-7347-2x","title":"Alpinestars SM3 Helmet Falcon Blue\/White\/Black\/Pink Fluo 2XL – Part Number 8300927-7347-2X","description":"SM3 Helmet - Falcon - Blue\/White\/Black\/Pink Fluo - 2XL\n\u003cp\u003eThe Alpinestars SM3 Helmet in Falcon Blue\/White\/Black\/Pink Fluo is engineered for motocross, enduro, and off-road riding. Designed to balance impact protection, comfort, and reduced weight, this 2XL helmet features a thermo-injected outer shell made from impact-resistant thermoplastic with varied thickness construction. The Alpinestars SM3 helmet uses a composite fiber layer between the outer shell and EPS liner to enhance protection during impacts while maintaining a lightweight riding profile. Manufacturer part number and vendor part number: 8300927-7347-2X.\u003cbr\u003eThe SM3 helmet incorporates a six-piece, multi-density EPS liner using five different densities to manage impact performance in specific areas while helping reduce overall weight. A polished inner EPS surface with a low-friction coating helps minimize rotational acceleration forces associated with certain oblique impacts. The helmet's inner and outer surfaces are engineered to help reduce the effects of angled impacts, while the crown and cheek pads allow riders to tailor the fit. Ten intake vents and seven exhaust ports support airflow and heat transfer, with the visor directing air into the ventilation system for enhanced cooling.\u003cbr\u003eSafety and convenience features include a visor release system designed to release at a predetermined force, helping reduce forces transferred to the rider's neck during an impact. The Alpinestars SM3 also includes an Emergency Release System with removable cheek pads for safer helmet removal by trained personnel. Recycled materials are used in the comfort liner to help reduce environmental impact, and integrated hydration tube channels in the cheek pads support practical off-road use. A soft textile chin strap and stainless steel D-rings provide a secure, comfortable fit, while the 3D-contoured foam and optimized chin area support rider comfort and impact performance. This Alpinestars 2XL helmet is suited for riders seeking dependable protection and ventilation for MX, enduro, and off-road applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThermo-injected shell with varied thickness construction balances impact protection and reduced weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eImpact-resistant thermoplastic outer shell with a composite fiber layer between the shell and EPS liner.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSix-piece, multi-density EPS liner uses five densities for targeted impact absorption.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLow-friction coating helps manage rotational acceleration during certain oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTen intake vents and seven exhaust ports promote airflow and heat transfer.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor release system is engineered to release at a predetermined force during an impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEmergency Release System and removable cheek pads support safer helmet removal.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRecycled-material comfort liner, hydration tube channels, and 3D-contoured cheek foam enhance riding comfort.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStainless steel D-rings provide a secure fit for MX, enduro, and off-road riding.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388917948651,"sku":"01109828","price":309.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137190.png?v=1789037746"},{"product_id":"alpinestars-sm3-helmet-falcon-blue-white-black-pink-fluo-large-8300927-7347-l","title":"Alpinestars SM3 Helmet Falcon Blue\/White\/Black\/Pink Fluo Large 8300927-7347-L","description":"SM3 Helmet - Falcon - Blue\/White\/Black\/Pink Fluo - Large\n\u003cp\u003eThe Alpinestars SM3 Helmet in Falcon Blue\/White\/Black\/Pink Fluo is engineered for motocross, enduro, and off-road riders who demand dependable protection, comfort, and ventilation. This Large helmet features a thermo-injected shell made with an impact-resistant polymer blend and varied thickness construction to help optimize impact performance while keeping the design lightweight. The Alpinestars SM3 combines a protective outer shell with a composite fiber layer positioned between the shell and EPS liner for added impact protection.\u003cbr\u003eThe helmet uses a six-piece, multi-density EPS liner with five specialized densities to manage impact energy in key areas while helping reduce overall weight. A low-friction coating on the inner EPS surface helps minimize rotational acceleration forces associated with certain oblique impacts. The inner and outer surfaces are designed to help reduce the effects of angled impacts, while the visor release system is engineered to release at a predetermined force to help reduce stress on the rider’s neck during an impact.\u003cbr\u003eVentilation is supported by ten intake ports and seven exhaust ports, with a visor design that helps direct air into the helmet for improved airflow and heat transfer. The comfort liner uses recycled materials and includes removable, adjustable crown and cheek pads for a personalized fit. Integrated hydration tube channels in the cheek pads add convenience during demanding rides, while the 25 mm soft textile chin strap and stainless steel D-rings provide a secure, comfortable closure.\u003cbr\u003eFor added protection and post-impact convenience, the Alpinestars SM3 includes an Emergency Release System and removable cheek pads that can be removed while the helmet remains on the rider. Three-dimensionally contoured comfort foam helps improve fit around the face and head, while the chin area is optimized for impact performance. Manufacturer and vendor part number: 8300927-7347-L. This Alpinestars Large helmet is intended for riders seeking a performance-focused off-road helmet with advanced impact management, airflow, fit adjustment, and practical safety features.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eConstruction: Thermo-injected, impact-resistant polymer shell with varied thickness for a balance of protection and lightweight performance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for motocross, enduro, and off-road riding.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eImpact Management: Six-piece EPS liner with five densities helps manage impact energy in targeted areas.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRotational Protection: Low-friction EPS coating helps reduce rotational acceleration forces during certain oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVentilation: Ten intake ports and seven exhaust ports promote airflow and heat transfer.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFit: Adjustable crown and cheek pads with three-dimensionally contoured foam provide a customized, comfortable fit.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety System: Emergency Release System and removable cheek pads support safer helmet removal after an incident.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor Design: Visor directs air toward the intake ports and includes a release system calibrated for impact response.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComfort: Recycled-material comfort liner, soft 25 mm textile chin strap, and stainless steel D-rings enhance riding comfort and security.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConvenience: Integrated hydration tube channels are built into the cheek pads.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSize and Finish: Large size in Falcon Blue\/White\/Black\/Pink Fluo.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: Alpinestars manufacturer and vendor part number 8300927-7347-L.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388918374635,"sku":"01109826","price":309.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137185.png?v=1789037769"},{"product_id":"alpinestars-sm3-helmet-falcon-blue-white-black-pink-fluo-medium-8300927-7347-m","title":"Alpinestars SM3 Helmet Falcon Blue\/White\/Black\/Pink Fluo Medium 8300927-7347-M","description":"SM3 Helmet - Falcon - Blue\/White\/Black\/Pink Fluo - Medium\n\u003cp\u003eThe Alpinestars SM3 Helmet in Falcon Blue\/White\/Black\/Pink Fluo is engineered for motocross, enduro, and off-road riding. This Medium helmet combines impact protection, ventilation, comfort, and lightweight performance in a thermo-injected shell designed with varying thicknesses. The impact-resistant thermoplastic outer shell works with a composite fiber layer and multi-density EPS liner to help manage impact energy while maintaining a comfortable fit for demanding rides. This helmet is identified by manufacturer and vendor part number 8300927-7347-M.\u003cbr\u003eThe SM3 helmet features a six-piece EPS liner using five densities to place the appropriate level of impact absorption where it is needed. A polished EPS surface with a low-friction coating helps reduce friction between the liner and comfort padding, supporting rotational impact management during certain oblique impacts. The inner and outer surfaces are engineered to help minimize the effects of angled impacts. Ten intake ports and seven exhaust ports promote airflow and heat transfer, while the visor design helps direct air into the ventilation system. The visor release system is designed to release at a predetermined force to help reduce forces transferred to the rider’s neck during an impact.\u003cbr\u003eFit and rider convenience are supported by adjustable crown and cheek pads, 3D-contoured comfort foam, and a recycled-material comfort liner. Integrated hydration tube channels in the cheek pads help keep hydration systems organized during off-road use. The 25 mm soft textile chin strap and stainless steel D-rings provide a secure, comfortable fit. For added protection and serviceability, the helmet includes an Emergency Release System with removable cheek pads, allowing the pads to be removed while the helmet remains in place. The optimized chin area supports impact performance, making the Alpinestars SM3 a versatile choice for riders seeking dependable protection and comfort across motocross, enduro, and off-road applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThermo-injected shell with varying thicknesses balances impact protection and lightweight performance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eImpact-resistant thermoplastic outer shell is reinforced with a composite fiber layer for added protection.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSix-piece, multi-density EPS liner uses five densities to support effective impact absorption.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLow-friction EPS coating helps manage rotational forces associated with certain oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTen intake ports and seven exhaust ports promote ventilation and heat transfer.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor release system is designed to release at a predetermined force during an impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable crown and cheek pads allow the Medium helmet fit to be tailored to the rider.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEmergency Release System and removable cheek pads support safer helmet removal.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRecycled-material comfort liner, hydration tube channels, soft textile chin strap, and stainless steel D-rings enhance riding convenience and fit.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAlpinestars SM3 Helmet, Falcon colorway, Medium size, manufacturer and vendor part number 8300927-7347-M.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388922110187,"sku":"01109825","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137170.png?v=1789037781"},{"product_id":"alpinestars-sm3-helmet-falcon-purple-white-black-pink-fluo-xl-8300927-3222-xl","title":"Alpinestars SM3 Helmet Falcon Purple\/White\/Black\/Pink Fluo XL 8300927-3222-XL","description":"SM3 Helmet - Falcon - Purple\/White\/Black\/Pink Fluo - XL\n\u003cp\u003eThe Alpinestars SM3 Helmet in Falcon Purple, White, Black, and Pink Fluo is designed for motocross, enduro, and off-road riding. This XL helmet uses a thermo-injected shell made from an impact-resistant polymer blend with varied thicknesses to balance protection and reduced weight. The outer shell works with an intermediate composite-fiber layer and a multi-density EPS liner to help manage impact energy across key areas of the helmet. Manufacturer and vendor part number: 8300927-3222-XL.\u003cbr\u003eThe SM3 features a six-piece EPS liner incorporating five densities for targeted impact absorption and improved weight management. A low-friction coating on the inner EPS surface helps reduce rotational acceleration associated with certain oblique impacts, while the engineered inner and outer surfaces are designed to help minimize oblique-impact forces. Ten intake vents and seven exhaust ports promote airflow and heat exchange, and the visor directs air toward the ventilation system. The visor release system is calibrated to release at a predetermined force, helping reduce forces transferred to the rider’s neck during an impact.\u003cbr\u003eComfort and practical safety features support extended off-road use. The crown and cheek pads can be adjusted for a more personalized fit, while the removable cheek pads and Emergency Release System help enable safer helmet removal after an incident. The comfort liner uses recycled materials, and integrated hydration-tube channels in the cheek pads add convenience during demanding rides. A soft 25 mm chin strap and stainless steel D-rings provide a secure, comfortable fit. The Alpinestars SM3 is supplied in size XL and is suited for riders seeking comprehensive protection, ventilation, fit adjustment, and off-road performance.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eShell Construction: Thermo-injected polymer shell with varied thicknesses for an optimized balance of impact protection and reduced weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRiding Application: Designed for motocross, enduro, and off-road riding.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eImpact Protection: Composite-fiber intermediate layer and multi-density EPS liner help manage impact energy.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEPS Liner: Six-piece liner with five densities for targeted impact absorption and weight management.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRotational Impact Management: Low-friction EPS coating helps reduce rotational acceleration from certain oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVentilation: Ten intake vents and seven exhaust ports promote airflow and heat transfer.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor System: Air-directing visor with a calibrated release system designed to help reduce neck forces during impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFit Adjustment: Crown and cheek pads allow the fit to be tailored to the rider’s head.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEmergency Removal: Emergency Release System and removable cheek pads support safer helmet removal.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComfort Liner: Recycled-material comfort liner helps reduce environmental impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHydration Compatibility: Integrated hydration-tube channels are built into the cheek pads.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eChin Strap: Soft 25 mm chin strap provides rider comfort and secure retention.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRetention System: Stainless steel D-rings provide a tight, dependable fit.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: Alpinestars manufacturer and vendor part number 8300927-3222-XL.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388922470635,"sku":"01109821","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137167.png?v=1789037805"},{"product_id":"alpinestars-sm3-falcon-motocross-helmet-red-fluo-white-blue-yellow-fluo-medium-8300927-3206-m","title":"Alpinestars SM3 Falcon Motocross Helmet Red Fluo\/White\/Blue\/Yellow Fluo Medium 8300927-3206-M","description":"SM3 Helmet - Falcon - Red Fluo\/White\/Blue\/Yellow Fluo - Medium\n\u003cp\u003eThe Alpinestars SM3 Helmet in the Falcon colorway is designed for motocross, enduro, and off-road riders who demand dependable impact protection, ventilation, comfort, and lightweight performance. This Medium helmet features a thermo-injected shell made from an impact-resistant thermoplastic polymer blend with strategically varied thicknesses. The design balances protection and weight while providing a durable platform for demanding trail and track use. Manufacturer and vendor part number 8300927-3206-M identifies this specific Alpinestars SM3 configuration in Red Fluo, White, Blue, and Yellow Fluo.\u003cbr\u003eThe SM3 uses a composite fiber layer positioned between the outer shell and EPS liner to enhance impact protection. Its multi-density inner liner uses six EPS sections and five densities to place the appropriate energy-absorbing material in key areas while helping reduce overall helmet weight. A low-friction coating on the main EPS liner is engineered to help manage rotational acceleration during certain oblique impacts. The inner and outer surfaces work together to reduce the effects of angled impacts, while the visor release system is designed to release at a predetermined force to help reduce stress transmitted to the rider’s neck during an impact.\u003cbr\u003eVentilation is optimized through ten intake ports and seven exhaust ports, with the visor directing airflow into the helmet for improved heat exchange during active riding. The recycled-material comfort liner supports a lower-impact manufacturing approach and can be adjusted with the included crown and cheek pads for a personalized fit. Integrated hydration tube channels help keep hydration equipment accessible, while removable cheek pads and the Emergency Release System support safer helmet removal after an incident. A contoured chin area, soft textile chin strap, stainless steel D-rings, and a secure adjustable fit complete the protection and comfort package. The Alpinestars SM3 is suited for riders seeking a performance-focused off-road helmet for motocross, enduro, and recreational trail applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eShell Construction: Thermo-injected impact-resistant thermoplastic shell with varied thickness for an effective balance of protection and lightweight performance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRiding Application: Optimized for motocross, enduro, and off-road riding.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eImpact Protection: Composite fiber layer positioned between the outer shell and EPS liner for enhanced impact protection.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEPS Liner: Six-piece, multi-density EPS liner uses five densities to manage impact energy in targeted areas.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRotational Impact Management: Low-friction coating helps reduce rotational acceleration associated with certain oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVentilation: Ten intake ports and seven exhaust ports promote airflow and heat transfer.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor System: Airflow-directing visor with a release system engineered to reduce forces during an impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFit Adjustment: Crown and cheek pads allow the fit to be tailored to the rider’s head.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEmergency Removal: Emergency Release System and removable cheek pads support safer helmet removal.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComfort: Recycled-material comfort liner, contoured cheek foam, and a soft textile chin strap enhance rider comfort.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHydration Compatibility: Integrated hydration tube channels are built into the cheek pads.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSecure Closure: Stainless steel D-rings provide a secure, adjustable fit.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIdentification: Alpinestars SM3, Medium, Falcon colorway; manufacturer and vendor part number 8300927-3206-M.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388922929387,"sku":"01109813","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137306.png?v=1789037823"},{"product_id":"alpinestars-sm3-helmet-radium-red-red-fluo-white-large-8300826-3216-l","title":"Alpinestars SM3 Helmet Radium Red\/Red Fluo\/White Large 8300826-3216-L","description":"SM3 Helmet - Radium - Red\/Red Fluo\/White - Large\n\u003cp\u003eThe Alpinestars SM3 Helmet in Radium Red, Red Fluo, and White is engineered for motocross, enduro, and off-road riding. Its thermo-injected shell uses a polymer blend with strategically varied thicknesses to provide a balanced combination of impact protection and reduced weight. The lightweight outer shell is reinforced by a composite fiber layer positioned between the shell and EPS liner, helping manage impact energy while maintaining rider comfort and mobility. This Large helmet is designed for riders who demand dependable protection during aggressive off-road use. Manufacturer: Alpinestars. Vendor part number: 8300826-3216-L. Manufacturer part number: 8300826-3216-L.\u003cbr\u003eThe SM3 features a six-piece EPS liner incorporating five densities, with each density positioned to support effective impact absorption in specific areas. A polished inner EPS surface with a low-friction coating helps reduce friction between the EPS liner and comfort liner, supporting rotational impact management during certain oblique impacts. The helmet also includes a visor release system engineered to release at a predetermined force, helping reduce forces transferred to the rider's neck during an impact. Ten intake vents and seven exhaust ports promote airflow and heat exchange, while the visor directs air toward the ventilation channels for improved cooling during demanding rides.\u003cbr\u003eRider comfort and fit can be tailored with the helmet's crown and cheek pads, supported by 3D-contoured foam for a secure, comfortable feel. The removable cheek pads are compatible with the integrated Emergency Release System, allowing safer and easier removal while the helmet remains in place. Hydration tube channels are built into the cheek pads for convenient off-road hydration system routing. A soft textile chin strap and stainless steel D-rings help provide a comfortable, secure fit. The comfort liner uses recycled materials to help reduce environmental impact without compromising performance. This Alpinestars SM3 Large helmet fits riders seeking a purpose-built MX, enduro, or off-road helmet with advanced ventilation, impact management, and practical trail-focused features.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eShell Construction: Thermo-injected polymer shell with varied thickness for optimized impact protection and reduced weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComposite Protection Layer: Composite fiber layer positioned between the outer shell and EPS liner for enhanced impact protection.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eImpact Management: Six-piece EPS liner with five densities to manage impact performance in designated helmet zones.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRotational Impact Control: Low-friction coating helps reduce friction and rotational acceleration forces during certain oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVentilation: Ten intake vents and seven exhaust ports support airflow and heat transfer during demanding riding.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor Release System: Predetermined-release visor design helps reduce forces transferred to the rider's neck during an impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCustom Fit: Crown and cheek pads allow the fit to be tailored to the rider's head.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEmergency Release System: Removable cheek pads support safer helmet removal while the helmet remains on the rider.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHydration Routing: Integrated cheek-pad channels accommodate hydration tubes for convenient off-road use.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSecure Retention: Soft textile chin strap and stainless steel D-rings provide a comfortable, secure fit.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Designed for motocross, enduro, and off-road riding.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Numbers: Manufacturer and vendor part number 8300826-3216-L.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388924502251,"sku":"01109808","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137302.png?v=1789037845"},{"product_id":"alpinestars-sm3-radium-helmet-red-red-fluo-white-medium-8300826-3216-m","title":"Alpinestars SM3 Radium Helmet Red\/Red Fluo\/White Medium 8300826-3216-M","description":"SM3 Helmet - Radium - Red\/Red Fluo\/White - Medium\n\u003cp\u003eThe Alpinestars SM3 Helmet in Radium Red, Red Fluo, and White is engineered for motocross, enduro, and off-road riding. This medium helmet combines impact protection, lightweight performance, ventilation, and rider comfort in a durable design. Its thermo-injected outer shell uses a polymer blend with varied thicknesses to help optimize protection in key areas while controlling overall weight. The impact-resistant thermoplastic shell is reinforced with a composite fiber layer positioned between the outer shell and the EPS liner for added impact protection.\u003cbr\u003eThe SM3 uses a six-piece, multi-density EPS liner with five distinct densities to help manage impact energy according to each area of the helmet. A low-friction coating on the inner EPS surface helps reduce rotational acceleration forces that may occur during certain oblique impacts, while the engineered inner and outer surfaces are designed to help minimize the effects of angled impacts. Ten intake vents and seven exhaust ports promote airflow and heat transfer, with the visor shaped to direct air into the ventilation system. The visor release system is designed to release at a predetermined force to help reduce forces transmitted to the rider’s neck during an impact.\u003cbr\u003eRider-focused details include a customizable fit through the crown and cheek pads, removable cheek pads with an Emergency Release System, and 3D-contoured foam for comfortable, controlled positioning. Recycled materials are used in the comfort liner to help reduce environmental impact, while integrated hydration tube channels in the cheek pads support convenient off-road hydration. A soft 25 mm chin strap and stainless steel D-rings provide a secure, comfortable fit. This Alpinestars SM3 Helmet is supplied in Medium and features manufacturer and vendor part number 8300826-3216-M.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThermo-injected polymer shell with varied thicknesses for a balance of impact protection and lightweight performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for motocross, enduro, and off-road riding\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eImpact-resistant thermoplastic outer shell with an internal composite fiber layer\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSix-piece EPS liner with five densities for targeted impact absorption\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLow-friction EPS coating helps manage rotational acceleration during oblique impacts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTen intake vents and seven exhaust ports promote airflow and heat exchange\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor directs air into the ventilation ports and includes a predetermined-force release system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemovable cheek pads and Emergency Release System support safer helmet removal\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCrown and cheek pads allow the fit to be tailored to the rider\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRecycled-material comfort liner helps reduce environmental impact\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntegrated hydration tube channels are built into the cheek pads\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSoft 25 mm chin strap and stainless steel D-rings provide a secure fit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Alpinestars; Model: SM3; Size: Medium\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eManufacturer part number and vendor part number: 8300826-3216-M\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388925616363,"sku":"01109807","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137298.png?v=1789037871"},{"product_id":"alpinestars-sm3-radium-off-road-helmet-red-red-fluo-white-xs-8300826-3216-xs","title":"Alpinestars SM3 Radium Off-Road Helmet Red\/Red Fluo\/White XS 8300826-3216-XS","description":"SM3 Helmet - Radium - Red\/Red Fluo\/White - XS\n\u003cp\u003eThe Alpinestars SM3 Helmet in Radium Red\/Red Fluo\/White is engineered for motocross, enduro, and off-road riding. This size XS helmet combines impact protection, ventilation, comfort, and lightweight performance in a thermo-injected shell designed with varied thickness for optimized strength and reduced weight. The lightweight outer shell uses impact-resistant thermoplastic, while a composite fiber layer between the shell and EPS liner adds protection against impacts. The crown and cheek pads can be tailored to help provide a secure, comfortable fit for the rider.\u003cbr\u003eThe SM3 uses a six-piece, multi-density EPS liner with five separate densities to manage impact absorption and volume in the appropriate areas. A low-friction coating on the polished inner EPS surface helps reduce friction between the liner and comfort padding, supporting rotational impact management during certain oblique impacts. The helmet also features ten intake vents and seven exhaust ports for improved airflow and heat transfer, with a visor designed to direct air into the ventilation system. Its visor release system is engineered to release at a predetermined force to help reduce stress on the rider’s neck during an impact.\u003cbr\u003eSafety and convenience features include an Emergency Release System and removable cheek pads that allow safer helmet removal after an incident. Three-dimensional contoured cheek foam helps improve comfort, while integrated hydration tube channels support convenient hydration system routing. The comfort liner uses recycled materials, and the soft textile chin strap with stainless steel D-rings provides a secure fit. The chin area is optimized for impact performance, making the SM3 a practical choice for riders seeking dependable protection and comfort for motocross, enduro, and off-road applications. Manufacturer: Alpinestars. Manufacturer part number: 8300826-3216-XS. Vendor part number: 8300826-3216-XS.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThermo-injected shell: Varying shell thickness is engineered to balance impact protection, durability, and reduced weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOff-road construction: Designed for motocross, enduro, and off-road riding applications.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComposite fiber protection layer: Positioned between the outer shell and EPS liner for added impact protection.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMulti-density EPS liner: Six-piece liner with five densities helps manage impact energy in targeted areas.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRotational impact management: Low-friction coating helps reduce friction and rotational acceleration forces during certain oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVentilation system: Ten intake vents and seven exhaust ports promote airflow and heat transfer.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor release system: Releases the visor at a predetermined force to help reduce neck loads during an impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEmergency Release System: Removable cheek pads support safer and easier helmet removal after an incident.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComfort fit: Crown and cheek pads can be adjusted to help tailor the fit to the rider’s head.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHydration routing: Integrated channels in the cheek pads help accommodate hydration tubes.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSecure closure: Stainless steel D-rings provide a firm and reliable fit.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSustainable comfort liner: Recycled materials help reduce the product’s environmental impact.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388927058155,"sku":"01109805","price":279.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137283.png?v=1789037889"},{"product_id":"alpinestars-youth-sm3-helmet-falcon-blue-white-black-pink-fluo-medium-8301327-7347-ym","title":"Alpinestars Youth SM3 Helmet Falcon Blue\/White\/Black\/Pink Fluo Medium 8301327-7347-YM","description":"Youth SM3 Helmet - Falcon - Blue\/White\/Black\/Pink Fluo - Medium\n\u003cp\u003eThe Alpinestars Youth SM3 Helmet combines advanced impact protection, lightweight performance, and adjustable comfort for young riders. This medium-size helmet features a thermo-injected shell made from a specialized polymer blend with varying thicknesses to help deliver an effective balance of strength and reduced weight. The technologically advanced impact-resistant thermoplastic outer shell works with a multiple-density inner liner to provide the appropriate level of impact absorption in key areas. The Alpinestars SM3 helmet is designed for motocross and off-road riding and is finished in Falcon Blue, White, Black, and Pink Fluo. Manufacturer and vendor part number: 8301327-7347-YM.\u003cbr\u003eThe helmet’s inner and outer surfaces are engineered to help minimize the effects of oblique impacts. A low-friction coating on the main EPS liner creates a slip-plane effect intended to reduce rotational acceleration forces during certain angled impacts. The visor release system is engineered to release at a predetermined force, helping reduce forces transferred to the rider’s neck during an impact. Stainless steel D-rings provide a secure, dependable fit, while the 25 mm soft textile chin strap supports rider comfort and safety.\u003cbr\u003eTen intake vents and seven exhaust ports maximize ventilation and heat exchange, with the visor designed to direct airflow into the helmet’s ventilation channels. The removable crown and cheek pads allow the fit to be tailored to the rider and can be replaced with optional thicknesses. Hydration tube channels are integrated into the cheek pads for convenient use during riding. The comfort liner uses recycled materials to help reduce environmental impact, and the Emergency Release System with removable cheek pads supports safer helmet removal by trained personnel. Three-dimensional contoured foam enhances comfort and fit for youth riders seeking dependable off-road protection.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eImpact-Resistant Shell: Thermo-injected polymer shell uses varying thicknesses to balance impact protection and lightweight performance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMultiple-Density Liner: Inner liner uses targeted densities to enhance impact absorption while helping reduce overall weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOblique Impact Design: Low-friction surfaces are engineered to help minimize rotational acceleration forces during certain angled impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdvanced Ventilation: Ten intake vents and seven exhaust ports promote airflow and heat transfer.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor Release System: Visor is designed to release at a predetermined force to help reduce forces on the rider’s neck during an impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable Fit: Crown and cheek pads are available in different thicknesses to customize the rider’s fit.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEmergency Release System: Removable cheek pads support safer and easier helmet removal while the helmet is still worn.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHydration Integration: Cheek pads include channels for convenient hydration tube routing.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComfort Liner: Recycled materials help reduce the liner’s environmental footprint.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSecure Closure: Soft 25 mm textile chin strap and stainless steel D-rings provide a comfortable, secure fit.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388928499947,"sku":"01111831","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137282.png?v=1789037918"},{"product_id":"alpinestars-youth-sm3-helmet-falcon-blue-white-black-pink-fluo-small-8301327-7347-ys","title":"ALPINESTARS Youth SM3 Helmet - Falcon - Blue\/White\/Black\/Pink Fluo - Small 8301327-7347- YS","description":"\u003cp\u003eYouth SM3 Helmet - Falcon - Blue\/White\/Black\/Pink Fluo - Small\n\u003cbr\u003eFeatures a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell constructed from a technologically advanced impact resistant thermoplastic, The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as spare parts in different thicknesses, The multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts— this layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388930203883,"sku":"01111830","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137275.png?v=1789037937"},{"product_id":"alpinestars-youth-sm3-helmet-falcon-red-fluo-white-blue-yellow-fluo-large-8301327-3206-yl","title":"ALPINESTARS Youth SM3 Helmet - Falcon - Red Fluo\/White\/Blue\/Yellow Fluo - Large 8301327-3206- YL","description":"\u003cp\u003eYouth SM3 Helmet - Falcon - Red Fluo\/White\/Blue\/Yellow Fluo - Large\n\u003cbr\u003eFeatures a thermo-injected shell incorporating a special polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell constructed from a technologically advanced impact resistant thermoplastic, The fit can be tailored to the rider’s head thanks to the helmet’s crown and cheek pads, which are available as spare parts in different thicknesses, The multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result from certain oblique impacts— this layer essentially acts as a slip plane to mimic the brain’s own low friction cerebrospinal fluid, which is the body’s natural defense against oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider’s neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet’s cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388931842283,"sku":"01111826","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137270.png?v=1789037968"},{"product_id":"alpinestars-youth-sm3-falcon-helmet-medium-red-fluo-white-blue-yellow-fluo-8301327-3206-ym","title":"Alpinestars Youth SM3 Falcon Helmet Medium Red Fluo\/White\/Blue\/Yellow Fluo - 8301327-3206-YM","description":"Youth SM3 Helmet - Falcon - Red Fluo\/White\/Blue\/Yellow Fluo - Medium\n\u003cp\u003eThe Alpinestars Youth SM3 Helmet in Medium is designed for young riders who need dependable impact protection, a secure fit, and comfortable performance during off-road riding. Finished in Falcon Red Fluo, White, Blue, and Yellow Fluo, this helmet features a lightweight thermo-injected thermoplastic shell made with a technologically advanced polymer blend. The shell uses varying thicknesses to help balance strength, impact protection, and reduced weight. The manufacturer part number and vendor part number for this helmet are 8301327-3206-YM.\u003cbr\u003eThe Youth SM3 uses a multiple-density inner liner with carefully selected materials positioned throughout the helmet to support effective impact absorption. Inner and outer surfaces are engineered to help minimize the effects of oblique impacts, while a low-friction coating on the primary EPS liner creates a slip-plane effect intended to reduce rotational acceleration forces. Ten air inlets and seven exhaust ports promote ventilation and heat transfer, with the visor designed to direct airflow into the helmet’s ventilation system. A visor release system is engineered to disengage at a predetermined force to help reduce stress on the rider’s neck during an impact.\u003cbr\u003eFit and everyday usability are supported by crown and cheek pads available in different thicknesses, allowing the helmet to be tailored to the rider’s head. The comfort liner uses recycled materials, and integrated hydration tube channels in the cheek pads help keep hydration systems organized. A soft textile chin strap provides rider comfort, while stainless steel D-rings help maintain a secure fit. The Emergency Release System and removable cheek pads allow trained responders to remove the cheek pads while the helmet remains in place, and the three-dimensional contoured foam supports a comfortable, stable fit for youth motocross and off-road applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThermo-injected shell: Lightweight impact-resistant thermoplastic construction uses a specialized polymer blend and varied shell thicknesses for balanced protection and comfort.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMultiple-density liner: Engineered liner densities are positioned to support impact absorption in key areas while helping reduce overall helmet weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOblique-impact management: Low-friction inner and outer surfaces help minimize rotational forces associated with certain angled impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLow-friction EPS coating: Slip-plane layer is designed to reduce rotational acceleration forces during oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVentilation system: Ten intake ports and seven exhaust ports promote airflow and heat transfer through the helmet.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAirflow-directed visor: Visor design helps direct air toward the helmet’s ventilation ports.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor release system: Predetermined-release mechanism is designed to help reduce forces transferred to the rider’s neck during an impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCustomizable fit: Crown and cheek pads are available in different thicknesses to help tailor the fit.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRecycled comfort liner: Comfort liner construction incorporates recycled materials to help reduce environmental impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHydration tube channels: Integrated cheek-pad channels provide convenient routing for hydration systems.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEmergency Release System: Removable cheek pads support safer helmet removal by trained responders.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSecure retention: Soft textile chin strap and stainless steel D-rings provide comfortable, dependable fastening.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388932661483,"sku":"01111825","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6137261.png?v=1789037986"},{"product_id":"alpinestars-youth-sm3-helmet-falcon-blue-white-black-pink-fluo-large-8301327-7347-yl","title":"Alpinestars Youth SM3 Helmet Falcon Blue\/White\/Black\/Pink Fluo Large 8301327-7347-YL","description":"Youth SM3 Helmet - Falcon - Blue\/White\/Black\/Pink Fluo - Large\n\u003cp\u003eThe Alpinestars Youth SM3 Helmet is designed for young riders who need dependable impact protection, a comfortable fit, and efficient ventilation. This Falcon colorway combines blue, white, black, and pink fluo graphics with a Large fit for a secure, performance-focused riding experience. The helmet features a thermo-injected outer shell made from an advanced impact-resistant thermoplastic, using strategically varied thicknesses to balance protection and reduced weight. The Alpinestars SM3 helmet is identified by manufacturer part number 8301327-7347-YL and vendor part number 8301327-7347-YL.\u003cbr\u003eThe multiple-density inner liner places the appropriate EPS density in key areas to improve impact absorption while helping maintain a lightweight design. Both the inner and outer surfaces are engineered to help reduce the effects of oblique impacts. A low-friction coating on the main EPS liner creates a slip-plane effect intended to reduce rotational acceleration forces associated with certain angled impacts. The visor release system is calibrated to release at a predetermined force, helping reduce forces transferred to the rider’s neck during an impact.\u003cbr\u003eTen intake vents and seven exhaust ports promote airflow and heat exchange throughout the helmet, while the visor is designed to direct air toward the ventilation openings. The comfort liner uses recycled materials to help reduce environmental impact, and integrated hydration tube channels in the cheek pads provide added convenience during extended rides. Crown and cheek pads are available separately in different thicknesses, allowing the fit to be tailored to the rider’s head.\u003cbr\u003eFor secure retention and practical safety, the Youth SM3 includes a soft textile chin strap, stainless steel D-rings, and removable cheek pads with an Emergency Release System. The emergency-release design allows the cheek pads to be removed while the helmet remains on the rider, supporting safer helmet removal after an incident. Three-dimensional contoured foam helps improve comfort, making the Alpinestars Youth SM3 Helmet a well-rounded choice for off-road riding and youth motorsports.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThermo-injected impact-resistant thermoplastic shell uses varied thicknesses for a balance of protection and reduced weight\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMultiple-density EPS inner liner provides targeted impact absorption\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLow-friction EPS coating helps reduce rotational acceleration forces during certain oblique impacts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInner and outer surfaces are engineered to minimize oblique-impact effects\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTen intake vents and seven exhaust ports provide efficient airflow and heat exchange\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor directs air toward the ventilation ports for enhanced airflow\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePredetermined-force visor release system helps reduce forces on the rider’s neck during an impact\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRecycled-material comfort liner supports a lower-carbon-footprint design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCrown and cheek pads are available in different thicknesses for a personalized fit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntegrated hydration tube channels are built into the cheek pads\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemovable cheek pads and Emergency Release System support safer helmet removal\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStainless steel D-rings provide secure retention\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThree-dimensional contoured foam improves rider comfort\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eManufacturer and vendor part number 8301327-7347-YL\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388941738219,"sku":"01111832","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6136391.png?v=1789038727"},{"product_id":"alpinestars-youth-sm3-falcon-helmet-purple-white-black-pink-fluo-large-8301327-3222-yl","title":"Alpinestars Youth SM3 Falcon Helmet Purple\/White\/Black\/Pink Fluo Large 8301327-3222-YL","description":"Youth SM3 Helmet - Falcon - Purple\/White\/Black\/Pink Fluo - Large\n\u003cp\u003eThe Alpinestars Youth SM3 Helmet is designed for young off-road and motocross riders who need dependable impact protection, a secure fit, and lightweight comfort. Finished in Falcon Purple, White, Black, and Pink Fluo, this Large helmet features a thermo-injected shell made from an advanced impact-resistant thermoplastic. The shell uses a specialized polymer blend with varying thicknesses to help balance protection and weight, while the multiple-density inner liner places the appropriate density in key areas for effective impact absorption.\u003cbr\u003eThe Youth SM3 incorporates technologies engineered to help manage the forces associated with oblique impacts. Low-friction surfaces on the inner and outer construction help reduce rotational forces, while a low-friction coating on the main EPS liner acts as a slip plane. The visor release system is designed to release at a predetermined force during an impact, helping reduce forces transferred to the rider’s neck. Ten intake vents and seven exhaust ports promote airflow and heat transfer, with the visor directing air toward the ventilation channels for improved cooling during demanding rides.\u003cbr\u003eFit and convenience are supported by adjustable crown and cheek pads, available separately in different thicknesses to help tailor the helmet to the rider’s head. The recycled-material comfort liner helps reduce environmental impact, and integrated hydration tube channels in the cheek pads provide practical routing for hydration systems. A soft 25 mm chin strap, stainless steel D-rings, and a secure closure system help maintain a comfortable, reliable fit. The Emergency Release System and removable cheek pads allow easier helmet removal by trained personnel while the helmet remains on the rider. Manufactured by Alpinestars, this Youth SM3 helmet is supplied under manufacturer and vendor part number 8301327-3222-YL.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThermo-injected shell: Advanced impact-resistant thermoplastic construction with a specialized polymer blend for a balance of protection and lightweight performance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMultiple-density liner: Uses different liner densities in key areas to support effective impact absorption while helping reduce overall helmet weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOblique impact management: Low-friction inner and outer surfaces help minimize rotational forces associated with certain oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLow-friction EPS coating: Creates a slip-plane effect designed to help reduce rotational acceleration forces.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVentilation system: Ten intake vents and seven exhaust ports promote airflow and heat transfer during off-road riding.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor release system: Releases the visor at a predetermined force to help reduce forces transferred to the rider’s neck during an impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCustomizable fit: Crown and cheek pads are available in different thicknesses to help tailor the fit.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEmergency Release System: Removable cheek pads support safer, easier helmet removal by trained personnel.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHydration routing: Integrated hydration tube channels in the cheek pads add convenience for extended rides.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSecure closure: Soft 25 mm chin strap and stainless steel D-rings provide a comfortable, secure fit.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComfort liner: Recycled-material liner helps support comfort while reducing the product’s environmental footprint.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Designed for youth off-road and motocross riders; Large size, Falcon Purple\/White\/Black\/Pink Fluo colorway.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number: Alpinestars manufacturer and vendor part number 8301327-3222-YL.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388941967595,"sku":"01111829","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6136390.png?v=1789038752"},{"product_id":"alpinestars-sm3-falcon-motocross-helmet-blue-white-black-pink-fluo-xl-part-number-8300927-7347-xl","title":"Alpinestars SM3 Falcon Motocross Helmet Blue\/White\/Black\/Pink Fluo XL - Part Number 8300927-7347-XL","description":"SM3 Helmet - Falcon - Blue\/White\/Black\/Pink Fluo - XL\n\u003cp\u003eThe Alpinestars SM3 Helmet in Falcon Blue, White, Black, and Pink Fluo is engineered for motocross, enduro, and off-road riding. This size XL helmet combines a lightweight, impact-resistant thermoplastic outer shell with a composite fiber inner shell positioned between the shell and EPS liner for enhanced impact protection. Its thermo-injected polymer shell uses varied thicknesses to provide an effective balance of strength, performance, comfort, and reduced weight for demanding off-road use. The chin area is optimized for impact performance, while stainless steel D-rings provide a secure and dependable fit.\u003cbr\u003eThe SM3 features a six-piece, multi-density EPS liner using five densities to help manage impact energy in the appropriate areas while supporting overall weight reduction. A polished EPS surface with a low-friction coating helps reduce friction between the liner and comfort padding, supporting rotational impact management during certain oblique impacts. The helmet's crown and cheek pads can be tailored to the rider's head, and the removable cheek pads and Emergency Release System allow safer, easier removal by trained responders while the helmet remains in place. The comfort liner uses recycled materials, while integrated hydration tube channels in the cheek pads help keep hydration systems organized during riding.\u003cbr\u003eTen intake vents and seven exhaust ports promote airflow and heat transfer, with the visor designed to direct air into the ventilation system. The visor release system is engineered to release at a predetermined force to help reduce forces transferred to the rider's neck during an impact. A soft textile 25 mm chin strap supports rider comfort and secure retention. This Alpinestars SM3 Falcon helmet is supplied in size XL and is identified by manufacturer part number and vendor part number 8300927-7347-XL, making it suitable for riders seeking advanced protection and fit for motocross, enduro, and off-road applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThermo-injected polymer shell with varied thickness construction balances impact protection, performance, and reduced weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLightweight impact-resistant thermoplastic outer shell supports demanding motocross, enduro, and off-road riding.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComposite fiber inner shell positioned between the outer shell and EPS liner helps improve impact protection.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSix-piece EPS liner uses five densities to manage impact energy and reduce overall helmet weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLow-friction EPS coating helps reduce rotational acceleration forces associated with certain oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTen intake vents and seven exhaust ports provide effective airflow and heat transfer.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor release system is designed to release at a predetermined force to help reduce neck forces during impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemovable cheek pads and Emergency Release System support safer helmet removal by trained responders.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCrown and cheek pad fit adjustment helps tailor the helmet to the rider's head.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRecycled-material comfort liner and integrated hydration tube channels improve convenience and sustainability.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSoft textile 25 mm chin strap and stainless steel D-rings provide comfortable, secure retention.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSize XL, Alpinestars SM3 model, Falcon colorway, manufacturer and vendor part number 8300927-7347-XL.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388944359659,"sku":"01109827","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6136443.png?v=1789038963"},{"product_id":"alpinestars-sm3-helmet-falcon-purple-white-black-pink-fluo-large-8300927-3222-l","title":"ALPINESTARS SM3 Helmet - Falcon - Purple\/White\/Black\/Pink Fluo - Large 8300927-3222-L","description":"\u003cp\u003eSM3 Helmet - Falcon - Purple\/White\/Black\/Pink Fluo - Large\n\u003cbr\u003eVaried thickness shell construction for optimized protection and light weight, Optimized for MX, Enduro, and Offroad use, Delivers blend of performance, protection, and comfort, Key Features, Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight, Lightweight outer shell is constructed from impact resistant thermoplastic, Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts, Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads, Construction, Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight, 6-piece EPS liner with five densities to effectively manage volume and impact performance, Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management, The inner and outer surfaces are engineered to minimize the effects of oblique impacts, Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts, Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports, The visor has been designed to direct air into the ports for enhanced airflow, Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact, Comfort liner is constructed using recycled materials for a lower carbon footprint, Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance, Soft textile chin strap is 25 mm for optimal safety and rider comfort, Protection, Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort, Chin area optimized for superior impact performance, Stainless steel D-rings ensure a tight and secure fit\u003c\/p\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388944490731,"sku":"01109820","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6136438.png?v=1789038982"},{"product_id":"alpinestars-sm3-falcon-motocross-helmet-red-fluo-white-blue-yellow-fluo-xl-8300927-3206-xl","title":"Alpinestars SM3 Falcon Motocross Helmet Red Fluo\/White\/Blue\/Yellow Fluo XL 8300927-3206-XL","description":"SM3 Helmet - Falcon - Red Fluo\/White\/Blue\/Yellow Fluo - XL\n\u003cp\u003eThe Alpinestars SM3 Helmet is engineered for motocross, enduro, and off-road riding, delivering a balanced combination of impact protection, comfort, ventilation, and lightweight performance. This Falcon graphic helmet features a Red Fluo, White, Blue, and Yellow Fluo color scheme with an XL fit. The thermo-injected outer shell uses a polymer blend with varied thicknesses to optimize protection in key areas while helping reduce overall weight. A composite fiber layer positioned between the outer shell and EPS liner adds another level of impact protection.\u003cbr\u003eThe SM3 uses a six-piece, multi-density EPS liner with five distinct densities to manage impact energy effectively across different areas of the helmet. A low-friction coating on the inner EPS liner helps reduce friction and rotational acceleration associated with certain oblique impacts. The inner and outer surfaces are engineered to help minimize the effects of angled impacts, while the contoured crown and cheek pads allow the fit to be tailored to the rider. The removable cheek pads and integrated Emergency Release System support safer helmet removal following an incident.\u003cbr\u003eTen intake vents and seven exhaust ports promote airflow and heat exchange, with the visor designed to direct air into the ventilation system. A visor release system is engineered to release at a predetermined force to help reduce stress on the rider’s neck during an impact. The comfort liner uses recycled materials, and integrated hydration tube channels in the cheek pads support convenient off-road hydration. A soft textile chin strap and stainless steel D-rings provide secure, comfortable retention. This Alpinestars SM3 Helmet is identified by manufacturer and vendor part number 8300927-3206-XL.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eThermo-injected polymer shell with varied thickness for optimized impact protection and reduced weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for motocross, enduro, and off-road riding.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComposite fiber layer positioned between the outer shell and EPS liner for enhanced protection.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSix-piece, multi-density EPS liner with five densities for effective impact energy management.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLow-friction EPS coating helps manage rotational acceleration during certain oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTen intake vents and seven exhaust ports maximize airflow and heat transfer.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor release system helps reduce neck forces during an impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRemovable cheek pads and Emergency Release System support safer helmet removal.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRecycled-material comfort liner helps reduce environmental impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntegrated hydration tube channels in the cheek pads.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eStainless steel D-rings provide secure retention.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: Alpinestars; model: SM3; size: XL; color: Falcon Red Fluo\/White\/Blue\/Yellow Fluo; manufacturer and vendor part number: 8300927-3206-XL.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388944556267,"sku":"01109815","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6136423.png?v=1789038994"},{"product_id":"alpinestars-sm3-helmet-falcon-red-fluo-white-blue-yellow-fluo-large-8300927-3206-l","title":"Alpinestars SM3 Helmet Falcon Red Fluo\/White\/Blue\/Yellow Fluo Large 8300927-3206-L","description":"SM3 Helmet - Falcon - Red Fluo\/White\/Blue\/Yellow Fluo - Large\n\u003cp\u003eThe Alpinestars SM3 Helmet in Falcon Red Fluo, White, Blue, and Yellow Fluo is designed for motocross, enduro, and off-road riders who demand dependable impact protection, comfortable fit, and efficient ventilation. Its thermo-injected shell uses a polymer blend with strategically varied thicknesses to balance protection and weight, while the impact-resistant thermoplastic outer shell and composite-fiber inner shell help manage energy during impacts. This Large helmet is identified by manufacturer and vendor part number 8300927-3206-L.\u003cbr\u003eThe SM3 features a six-piece EPS liner with five different densities, placing the appropriate material in key areas for effective impact absorption and reduced overall weight. A polished EPS surface with a low-friction coating works with the comfort liner to help reduce rotational acceleration associated with certain oblique impacts. The inner and outer helmet surfaces are engineered to help minimize the effects of angled impacts, providing a carefully developed protection system for demanding off-road use.\u003cbr\u003eTen intake vents and seven exhaust ports promote airflow and heat exchange during intense riding. The visor is designed to direct air into the helmet ports, while its release system is calibrated to disengage at a predetermined force to help reduce stress on the rider’s neck during an impact. Recycled materials are used in the comfort liner to help reduce environmental impact, and integrated hydration tube channels in the cheek pads provide convenient routing for compatible hydration systems.\u003cbr\u003eRider comfort and practical safety features include a soft 25 mm chin strap, stainless steel D-rings for a secure fit, and adjustable crown and cheek pads for personalized positioning. The removable cheek pads and Emergency Release System support safer helmet removal by allowing the pads to be extracted while the helmet remains in place. Three-dimensionally contoured foam improves comfort, while the chin area is optimized for impact performance. The Alpinestars SM3 is a purpose-built Large off-road helmet for motocross, enduro, and trail applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eProtection: Thermo-injected polymer shell with varied thicknesses balances impact protection and reduced weight.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Impact-resistant thermoplastic outer shell and composite-fiber inner shell provide layered protection.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eImpact Management: Six-piece EPS liner with five densities helps manage impact energy in targeted areas.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRotational Protection: Low-friction EPS coating helps reduce rotational acceleration during certain oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVentilation: Ten intake vents and seven exhaust ports support airflow and heat transfer.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor: Air-directing visor design improves ventilation, while the release system helps reduce neck forces during an impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFit: Adjustable crown and cheek pads allow the helmet to be tailored to the rider’s head.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSafety: Emergency Release System and removable cheek pads support safer helmet removal.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComfort: Recycled-material comfort liner, contoured foam, soft 25 mm chin strap, and integrated hydration tube channels enhance usability.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFastening: Stainless steel D-rings provide a secure and consistent fit.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Designed for motocross, enduro, off-road, and trail riding applications.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: Alpinestars manufacturer and vendor part number 8300927-3206-L.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388944785643,"sku":"01109814","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6136411.png?v=1789039009"},{"product_id":"alpinestars-sm3-radium-off-road-helmet-red-red-fluo-white-2xl-8300826-3216-2x","title":"Alpinestars SM3 Radium Off-Road Helmet Red\/Red Fluo\/White 2XL 8300826-3216-2X","description":"SM3 Helmet - Radium - Red\/Red Fluo\/White - 2XL\n\u003cp\u003eThe Alpinestars SM3 Helmet in Radium Red, Red Fluo, and White is engineered for motocross, enduro, and off-road riding. This 2XL helmet combines impact protection, ventilation, comfort, and lightweight performance in a thermo-injected shell made from an advanced polymer blend with varied thickness. The Alpinestars manufacturer and vendor part number is 8300826-3216-2X, providing a precise reference for fitment and replacement selection.\u003cbr\u003eThe helmet uses a lightweight, impact-resistant thermoplastic outer shell with a composite fiber inner structure positioned between the shell and EPS liner for enhanced impact protection. A six-piece, multi-density EPS liner uses five densities to help manage impact energy in the appropriate areas while supporting overall weight reduction. The polished EPS surface features a low-friction coating designed to reduce friction between the liner and comfort padding, helping manage rotational forces associated with certain oblique impacts. The inner and outer surfaces are engineered to help minimize the effects of angled impacts.\u003cbr\u003eTen intake vents and seven exhaust ports promote airflow and heat exchange during demanding rides, while the visor is shaped to direct air into the ventilation system. A visor release system is designed to release at a predetermined force to help reduce forces transferred to the rider's neck during an impact. The recycled-material comfort liner supports a lower-impact construction approach, and removable cheek pads with an Emergency Release System allow for safer, easier helmet removal by trained responders. Integrated hydration tube channels, a soft textile chin strap, stainless steel D-rings, and adjustable crown and cheek padding provide practical comfort and a secure fit for off-road riders. The Alpinestars SM3 2XL helmet is intended for riders seeking dependable protection and performance for motocross, enduro, and recreational off-road applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVaried-thickness thermo-injected shell: Uses an engineered polymer blend to balance impact protection and lightweight performance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOff-road riding design: Optimized for motocross, enduro, and off-road applications.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComposite fiber inner structure: Adds protection between the impact-resistant outer shell and EPS liner.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMulti-density EPS liner: Six-piece construction with five densities helps manage impact energy in designated areas.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLow-friction EPS coating: Helps reduce friction and rotational acceleration forces during certain oblique impacts.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVentilation system: Ten intake vents and seven exhaust ports support airflow and heat transfer.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVisor release system: Releases at a predetermined force to help reduce neck loading during an impact.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEmergency Release System: Removable cheek pads support safer helmet removal by trained responders.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComfort-focused fit: Adjustable crown and cheek pads, 3D-contoured foam, and a soft textile chin strap improve rider comfort.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHydration tube channels: Integrated into the cheek pads for convenient hydration-system routing.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSecure retention: Stainless steel D-rings provide a tight and dependable fit.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct identification: Alpinestars manufacturer and vendor part number 8300826-3216-2X.\u003c\/li\u003e\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":49388944851179,"sku":"01109810","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/6136406.png?v=1789039020"},{"product_id":"alpinestars-sm3-heat-motocross-helmet-gloss-yellow-fluo-black-xl-part-number-8301026-5011-xl","title":"Alpinestars SM3 Heat Motocross Helmet, Gloss Yellow Fluo\/Black, XL, Part Number 8301026-5011-XL","description":"SM3 Helmet - Heat - Gloss Yellow Fluo\/Black - XL\n\u003cp\u003eThe Alpinestars SM3 Heat helmet is designed for motocross, enduro, and off-road riding. This XL helmet features a gloss yellow fluo and black finish and uses a lightweight, impact-resistant thermoplastic outer shell with varied thickness construction. The SM3 combines targeted protection, ventilation, and rider comfort for demanding off-road applications. Manufacturer part number 8301026-5011-XL and vendor part number 8301026-5011-XL identify this specific configuration.\u003c\/p\u003e\u003cp\u003eAlpinestars uses a composite fiber layer between the outer shell and EPS liner to enhance impact protection while helping control overall weight. The six-piece EPS liner incorporates five densities to manage impact energy in targeted areas. A low-friction coating on the inner EPS liner and engineered inner and outer surfaces help reduce rotational acceleration associated with certain oblique impacts. The visor release system is designed to release at a predetermined force to help reduce stress on the rider’s neck during an impact.\u003c\/p\u003e\u003cp\u003eVentilation is supported by ten intake ports and seven exhaust ports, while the visor helps direct airflow into the helmet. The crown and cheek pads allow the fit to be tailored to the rider, and the removable cheek pads support the integrated Emergency Release System for safer helmet removal. The comfort liner uses recycled materials, and integrated hydration tube channels in the cheek pads add convenience during extended rides. A soft 1-inch chin strap and stainless steel D-rings provide secure, comfortable retention.\u003c\/p\u003e\u003cp\u003eThe Alpinestars SM3 Heat XL is intended for riders seeking a performance-focused helmet for motocross, enduro, and off-road use. Always confirm proper helmet fit, riding application, and local safety requirements before use.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: XL\u003c\/li\u003e\n\u003cli\u003eModel: SM3 Heat\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 8301026-5011-XL\u003c\/li\u003e\n\u003cli\u003eVendor part number: 8301026-5011-XL\u003c\/li\u003e\n\u003cli\u003eColor: Gloss yellow fluo and black\u003c\/li\u003e\n\u003cli\u003eApplication: Motocross, enduro, and off-road riding\u003c\/li\u003e\n\u003cli\u003eShell construction: Thermo-injected polymer blend with varied thickness for a balance of impact protection and reduced weight\u003c\/li\u003e\n\u003cli\u003eOuter shell: Lightweight, impact-resistant thermoplastic\u003c\/li\u003e\n\u003cli\u003eImpact management: Composite fiber layer positioned between the outer shell and EPS liner\u003c\/li\u003e\n\u003cli\u003eEPS liner: Six-piece design with five densities for targeted impact absorption\u003c\/li\u003e\n\u003cli\u003eRotational impact management: Low-friction coating and engineered liner surfaces help reduce rotational acceleration during certain oblique impacts\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake ports and seven exhaust ports support airflow and heat transfer\u003c\/li\u003e\n\u003cli\u003eVisor: Airflow-directing design with a predetermined-force release system\u003c\/li\u003e\n\u003cli\u003eFit adjustment: Crown and cheek pads can be tailored to the rider’s head\u003c\/li\u003e\n\u003cli\u003eEmergency Release System: Removable cheek pads support safer helmet removal\u003c\/li\u003e\n\u003cli\u003eComfort liner: Constructed with recycled materials\u003c\/li\u003e\n\u003cli\u003eHydration compatibility: Integrated tube channels in the cheek pads\u003c\/li\u003e\n\u003cli\u003eRetention: Soft textile 1-inch chin strap with stainless steel D-rings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564323340523,"sku":"01109037","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5488216.png?v=1790782370"},{"product_id":"alpinestars-sm3-heat-motocross-helmet-gloss-yellow-fluo-black-large-part-8301026-5011-l","title":"Alpinestars SM3 Heat Motocross Helmet, Gloss Yellow Fluo\/Black, Large, Part 8301026-5011-L","description":"SM3 Helmet - Heat - Gloss Yellow Fluo\/Black - Large\n\u003cp\u003eThe Alpinestars SM3 Heat helmet is designed for motocross, enduro, and off-road riders who need dependable impact protection, ventilation, and all-day comfort. This Large helmet features a gloss yellow fluo and black finish and uses a thermo-injected shell made from an impact-resistant thermoplastic polymer blend. Varying shell thicknesses help balance protection and reduced weight, while a composite fiber layer between the outer shell and EPS liner adds another level of impact management. Manufacturer part number 8301026-5011-L and vendor part number 8301026-5011-L identify this Alpinestars helmet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeature: Optimized off-road protection\u003c\/strong\u003e The chin area and shell construction are engineered for demanding motocross, enduro, and off-road riding conditions. A six-piece EPS liner uses five densities to place the appropriate energy-absorbing material in key impact zones. The polished EPS surface and low-friction coating help reduce rotational acceleration associated with certain oblique impacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeature: Adjustable comfort fit\u003c\/strong\u003e Crown and cheek pads allow the fit to be tailored to the rider's head, while removable cheek pads support easier helmet removal during an emergency. The 3D-contoured comfort foam improves contact and cushioning, and the recycled-material comfort liner helps reduce the product's environmental impact. A soft 1-inch chin strap and stainless steel D-rings provide secure, comfortable retention.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeature: High-efficiency ventilation\u003c\/strong\u003e Ten air inlets and seven exhaust ports promote airflow and heat exchange during active riding. The visor is shaped to direct air toward the ventilation channels, and the visor release system is calibrated to release at a predetermined force to help reduce loads on the rider's neck during an impact. Integrated hydration tube channels in the cheek pads add convenience for long rides. The helmet also includes an Emergency Release System for safer service and removal procedures.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: Large\u003c\/li\u003e\n\u003cli\u003eModel: SM3 Heat\u003c\/li\u003e\n\u003cli\u003eColor: Gloss Yellow Fluo\/Black\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 8301026-5011-L\u003c\/li\u003e\n\u003cli\u003eVendor part number: 8301026-5011-L\u003c\/li\u003e\n\u003cli\u003eApplication: Motocross, enduro, and off-road riding\u003c\/li\u003e\n\u003cli\u003eConstruction: Thermo-injected impact-resistant thermoplastic shell with a composite fiber intermediate layer\u003c\/li\u003e\n\u003cli\u003eImpact management: Six-piece EPS liner with five densities and low-friction rotational impact coating\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake ports and seven exhaust ports\u003c\/li\u003e\n\u003cli\u003eFit system: Adjustable crown and cheek pads with stainless steel D-ring retention\u003c\/li\u003e\n\u003cli\u003eSafety: Emergency Release System, removable cheek pads, and calibrated visor release system\u003c\/li\u003e\n\u003cli\u003eComfort: Recycled-material comfort liner, 1-inch soft textile chin strap, and 3D-contoured foam\u003c\/li\u003e\n\u003cli\u003eConvenience: Integrated hydration tube channels in the cheek pads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564326191339,"sku":"01109036","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5488215.png?v=1790782401"},{"product_id":"alpinestars-sm3-heat-motocross-helmet-gloss-yellow-fluo-black-xs-8301026-5011-xs","title":"Alpinestars SM3 Heat Motocross Helmet Gloss Yellow Fluo\/Black XS 8301026-5011-XS","description":"SM3 Helmet - Heat - Gloss Yellow Fluo\/Black - XS\n\u003cp\u003eThe Alpinestars SM3 Heat Helmet is designed for motocross, enduro, and off-road riding, delivering a balanced combination of impact protection, lightweight performance, and rider comfort. This Gloss Yellow Fluo\/Black helmet is offered in size XS and features a thermo-injected outer shell made from an impact-resistant thermoplastic polymer blend. Varied shell thickness helps optimize protection while keeping the helmet comfortable for extended rides.\u003c\/p\u003e\u003cp\u003eInside, the Alpinestars SM3 uses a six-piece EPS liner with five densities to help manage impact energy across different areas of the helmet. A low-friction coating on the main EPS liner helps reduce rotational acceleration associated with certain oblique impacts. The inner and outer surfaces are engineered to help minimize the effects of angled impacts, while the crown and cheek pads allow the fit to be tailored to the rider. Removable cheek pads and the Emergency Release System support safer helmet removal after an incident.\u003c\/p\u003e\u003cp\u003eTen air inlets and seven exhaust ports promote efficient ventilation and heat transfer. The visor is shaped to direct airflow into the helmet ports, and its release system is designed to disengage at a predetermined force to help reduce strain on the rider’s neck during an impact. Recycled materials are used in the comfort liner to help reduce environmental impact, while integrated hydration tube channels in the cheek pads add convenience during demanding rides. A soft 1-inch chin strap and stainless steel D-rings provide a secure, comfortable fit.\u003c\/p\u003e\u003cp\u003eThe Alpinestars SM3 Helmet is intended for riders seeking dependable protection and ventilation for MX, enduro, and off-road applications. It includes the manufacturer part number and vendor part number 8301026-5011-XS.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: XS\u003c\/li\u003e\n\u003cli\u003eModel: SM3 Heat\u003c\/li\u003e\n\u003cli\u003eColor: Gloss Yellow Fluo\/Black\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 8301026-5011-XS\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: 8301026-5011-XS\u003c\/li\u003e\n\u003cli\u003eApplication: Motocross, enduro, and off-road riding\u003c\/li\u003e\n\u003cli\u003eShell Construction: Thermo-injected impact-resistant thermoplastic with varied thickness for optimized protection and reduced weight\u003c\/li\u003e\n\u003cli\u003eImpact Protection: Composite fiber layer positioned between the outer shell and EPS liner\u003c\/li\u003e\n\u003cli\u003eEPS Liner: Six-piece, five-density construction for targeted impact absorption\u003c\/li\u003e\n\u003cli\u003eRotational Impact Management: Low-friction coating helps reduce rotational acceleration during certain oblique impacts\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake ports and seven exhaust ports support airflow and heat transfer\u003c\/li\u003e\n\u003cli\u003eVisor: Airflow-directing design with a predetermined-force release system\u003c\/li\u003e\n\u003cli\u003eFit System: Adjustable crown and cheek pads with removable cheek pads\u003c\/li\u003e\n\u003cli\u003eEmergency Removal: Emergency Release System supports safer cheek-pad removal while the helmet is worn\u003c\/li\u003e\n\u003cli\u003eComfort: Recycled-material comfort liner and soft 1-inch chin strap\u003c\/li\u003e\n\u003cli\u003eConvenience: Integrated hydration tube channels in the cheek pads\u003c\/li\u003e\n\u003cli\u003eRetention: Stainless steel D-rings provide a secure fit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564329304299,"sku":"01109033","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5488319.png?v=1790782431"},{"product_id":"alpinestars-sm3-heat-motorcycle-helmet-gloss-red-white-black-xl-part-8301026-3126-xl","title":"Alpinestars SM3 Heat Motorcycle Helmet, Gloss Red\/White\/Black, XL, Part 8301026-3126-XL","description":"SM3 Helmet - Heat - Gloss Red\/White\/Black - XL\n\u003cp\u003eThe Alpinestars SM3 Helmet in the Heat Gloss Red\/White\/Black design is built for motocross, enduro, and off-road riding. This size XL helmet combines a lightweight thermoplastic outer shell with a polymer blend engineered using varied thicknesses for a balance of impact protection, comfort, and reduced weight. The SM3 model includes a composite fiber layer positioned between the outer shell and EPS liner to help enhance protection against impacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and Comfort:\u003c\/strong\u003e The crown and cheek pads allow the fit to be tailored to the rider, while removable cheek pads support convenient adjustment and emergency removal. The comfort liner uses recycled materials and 3D-contoured foam for a secure, comfortable fit. Integrated hydration tube channels in the cheek pads add convenience for long rides, and the 1-inch soft textile chin strap with stainless steel D-rings provides a secure closure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImpact Management:\u003c\/strong\u003e The six-piece EPS liner uses five densities to place the appropriate level of impact absorption in key areas while helping control overall weight. A low-friction coating on the main EPS liner is designed to reduce rotational acceleration associated with certain oblique impacts. The inner and outer surfaces are engineered to help minimize the effects of angled impacts, while the optimized chin area supports effective impact performance. The visor release system is calibrated to release at a predetermined force to help reduce forces transmitted to the rider’s neck during an impact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e Ten air inlets and seven exhaust ports promote airflow and heat exchange during demanding rides. The visor is shaped to direct air into the ventilation ports for improved circulation. The Alpinestars SM3 Helmet, manufacturer part number 8301026-3126-XL and vendor part number 8301026-3126-XL, is sized XL and designed to fit riders seeking a protective, ventilated helmet for motocross, enduro, and off-road applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: XL\u003c\/li\u003e\n\u003cli\u003eModel: SM3 Heat\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eColor: Gloss Red\/White\/Black\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 8301026-3126-XL\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: 8301026-3126-XL\u003c\/li\u003e\n\u003cli\u003eApplication: Motocross, enduro, and off-road riding\u003c\/li\u003e\n\u003cli\u003eShell Construction: Thermo-injected polymer blend with varied thickness for lightweight impact protection\u003c\/li\u003e\n\u003cli\u003eImpact Protection: Composite fiber layer and six-piece, five-density EPS liner\u003c\/li\u003e\n\u003cli\u003eRotational Impact Management: Low-friction coating designed to help reduce rotational acceleration\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake ports and seven exhaust ports\u003c\/li\u003e\n\u003cli\u003eVisor: Airflow-directing design with calibrated release system\u003c\/li\u003e\n\u003cli\u003eFit System: Adjustable crown and cheek pads with removable cheek pads\u003c\/li\u003e\n\u003cli\u003eHydration Compatibility: Integrated hydration tube channels in the cheek pads\u003c\/li\u003e\n\u003cli\u003eRetention: 1-inch soft textile chin strap with stainless steel D-rings\u003c\/li\u003e\n\u003cli\u003eEmergency Safety: Emergency Release System for easier cheek-pad removal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564334940395,"sku":"01109031","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5488311.png?v=1790782466"},{"product_id":"alpinestars-sm3-heat-motocross-helmet-gloss-red-white-black-small-part-8301026-3126-s","title":"Alpinestars SM3 Heat Motocross Helmet, Gloss Red\/White\/Black, Small, Part 8301026-3126-S","description":"SM3 Helmet - Heat - Gloss Red\/White\/Black - Small\n\u003cp\u003eThe Alpinestars SM3 Heat Helmet is designed for motocross, enduro, and off-road riding, delivering a balanced combination of impact protection, lightweight performance, and rider comfort. This Small helmet features a gloss red, white, and black Heat graphic finish and uses a thermo-injected polymer shell engineered with varied thicknesses for optimized protection in key impact areas.\u003c\/p\u003e\u003cp\u003eThe helmet's lightweight thermoplastic outer shell works with a composite fiber layer and a six-piece, multi-density EPS liner to manage impact energy effectively. The polished EPS surface and low-friction coating are designed to help reduce rotational acceleration during certain oblique impacts. The crown and cheek pads can be tailored to the rider's head for a secure, comfortable fit, while the 3D-contoured cheek pad foam supports comfort during extended rides.\u003c\/p\u003e\u003cp\u003eTen intake vents and seven exhaust ports promote airflow and heat transfer, with the visor designed to direct air toward the ventilation openings. The visor release system is engineered to release at a predetermined force to help reduce loads on the rider's neck during an impact. Recycled materials are used in the comfort liner, and integrated hydration tube channels in the cheek pads provide added convenience for off-road riding. A soft 25 mm chin strap and stainless steel D-rings help provide a secure fit.\u003c\/p\u003e\u003cp\u003eFor added protection and emergency response, the Alpinestars SM3 includes an Emergency Release System and removable cheek pads that allow the pads to be removed while the helmet remains in place. Manufacturer part number 8301026-3126-S and vendor part number 8301026-3126-S identify this Small Alpinestars helmet.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: Small\u003c\/li\u003e\n\u003cli\u003eModel: SM3 Heat\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 8301026-3126-S\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: 8301026-3126-S\u003c\/li\u003e\n\u003cli\u003eColor: Gloss red, white, and black\u003c\/li\u003e\n\u003cli\u003eApplication: Motocross, enduro, and off-road riding\u003c\/li\u003e\n\u003cli\u003eShell Construction: Thermo-injected polymer shell with varied thickness for optimized protection and reduced weight\u003c\/li\u003e\n\u003cli\u003eImpact Management: Composite fiber layer and six-piece, multi-density EPS liner help manage impact energy\u003c\/li\u003e\n\u003cli\u003eRotational Impact Management: Low-friction EPS coating helps reduce rotational acceleration during certain oblique impacts\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake vents and seven exhaust ports support airflow and heat exchange\u003c\/li\u003e\n\u003cli\u003eFit System: Adjustable crown and cheek pads provide a tailored fit\u003c\/li\u003e\n\u003cli\u003eProtection: Emergency Release System and removable cheek pads support safer helmet removal\u003c\/li\u003e\n\u003cli\u003eVisor: Release system is engineered to disengage at a predetermined force during an impact\u003c\/li\u003e\n\u003cli\u003eComfort: Recycled-material comfort liner, 3D-contoured cheek pads, and soft 25 mm chin strap\u003c\/li\u003e\n\u003cli\u003eConvenience: Integrated hydration tube channels in the cheek pads\u003c\/li\u003e\n\u003cli\u003eRetention: Stainless steel D-rings provide a secure fit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564345688299,"sku":"01109028","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5488135.png?v=1790782497"},{"product_id":"alpinestars-sm3-heat-motocross-helmet-gloss-white-purple-pink-2xl-part-8301026-2052-xxl","title":"Alpinestars SM3 Heat Motocross Helmet, Gloss White\/Purple\/Pink, 2XL, Part 8301026-2052-XXL","description":"SM3 Helmet - Heat - Gloss White\/Purple\/Pink - 2XL\n\u003cp\u003eThe Alpinestars SM3 Heat helmet is engineered for motocross, enduro, and off-road riding, delivering a balanced combination of impact protection, low weight, ventilation, and rider comfort. This 2XL helmet features a gloss white, purple, and pink finish and uses a thermo-injected shell made from an impact-resistant polymer blend. Varied shell thickness helps optimize protection while keeping the helmet lightweight and comfortable for extended riding sessions.\u003c\/p\u003e\u003cp\u003eIts protective construction includes a composite fiber layer positioned between the outer shell and EPS liner, along with a six-piece, multi-density EPS liner designed to manage impact energy effectively. The polished inner EPS surface uses a low-friction coating to help reduce rotational acceleration during certain oblique impacts. The inner and outer surfaces are engineered to help minimize oblique-impact forces, while the visor release system is designed to release at a predetermined force to help reduce stress on the rider’s neck during an impact.\u003c\/p\u003e\u003cp\u003eVentilation is supported by ten intake ports and seven exhaust ports, with the visor directing airflow into the helmet for improved heat transfer. Crown and cheek pads allow the fit to be tailored to the rider, and the removable cheek pads support the Emergency Release System for safer helmet removal. Recycled-material comfort liner construction helps reduce environmental impact, while integrated hydration tube channels add convenience during demanding rides. A soft 25 mm chin strap and stainless steel D-rings provide secure, comfortable retention.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for riders participating in motocross, enduro, and off-road applications. This helmet is sized 2XL and should be selected according to the rider’s measured head circumference and the manufacturer’s fit guidance. The manufacturer is Alpinestars, and the vendor part number is 8301026-2052-XXL.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 2XL\u003c\/li\u003e\n\u003cli\u003eModel: SM3 Heat\u003c\/li\u003e\n\u003cli\u003eColor: Gloss white, purple, and pink\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eManufacturer: Alpinestars\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: 8301026-2052-XXL\u003c\/li\u003e\n\u003cli\u003eApplication: Motocross, enduro, and off-road riding\u003c\/li\u003e\n\u003cli\u003eShell Construction: Thermo-injected impact-resistant thermoplastic with varied thickness for optimized protection and reduced weight\u003c\/li\u003e\n\u003cli\u003eImpact Protection: Composite fiber layer and six-piece, five-density EPS liner for targeted impact absorption\u003c\/li\u003e\n\u003cli\u003eRotational Impact Management: Low-friction coating helps reduce rotational acceleration during certain oblique impacts\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake ports and seven exhaust ports provide high airflow and heat transfer\u003c\/li\u003e\n\u003cli\u003eVisor System: Visor directs air into the ventilation ports and releases at a predetermined force during an impact\u003c\/li\u003e\n\u003cli\u003eFit Adjustment: Crown and cheek pads allow the fit to be tailored to the rider\u003c\/li\u003e\n\u003cli\u003eEmergency Removal: Emergency Release System with removable cheek pads supports safer helmet removal\u003c\/li\u003e\n\u003cli\u003eComfort: Recycled-material comfort liner, contoured foam, and soft 25 mm chin strap\u003c\/li\u003e\n\u003cli\u003eHydration Compatibility: Integrated hydration tube channels in the cheek pads\u003c\/li\u003e\n\u003cli\u003eRetention: Stainless steel D-rings provide secure fastening\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564350472427,"sku":"01109026","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5488133.png?v=1790782536"},{"product_id":"alpinestars-sm3-mx-helmet-heat-gloss-white-purple-pink-xl-part-number-8301026-2052-xl","title":"Alpinestars SM3 MX Helmet Heat Gloss White\/Purple\/Pink XL - Part Number 8301026-2052-XL","description":"SM3 Helmet - Heat - Gloss White\/Purple\/Pink - XL\n\u003cp\u003eThe Alpinestars SM3 Helmet in Heat Gloss White\/Purple\/Pink, size XL, is designed for motocross, enduro, and off-road riding. Manufacturer and vendor part number 8301026-2052-XL, this helmet combines a lightweight thermoplastic shell with impact-focused construction for dependable protection, comfort, and performance during demanding rides. Its varied-thickness shell uses a polymer blend engineered to balance impact resistance and reduced weight, while a composite fiber layer between the outer shell and EPS liner helps improve protection against impacts.\u003c\/p\u003e\u003cp\u003eThe six-piece EPS liner uses five densities to manage impact energy in targeted areas while helping reduce overall helmet weight. A polished, low-friction coating inside the main EPS liner is designed to reduce rotational acceleration associated with certain oblique impacts. The crown and cheek pads can be tailored for a secure, comfortable fit, and the removable cheek pads support easier helmet removal in an emergency. The Emergency Release System, contoured comfort foam, 25 mm soft textile chin strap, and stainless steel D-rings provide additional convenience and secure retention.\u003c\/p\u003e\u003cp\u003eVentilation is optimized through ten intake ports and seven exhaust ports, with the visor directing airflow into the helmet for improved heat transfer. The visor release system is engineered to release at a predetermined force to help reduce forces transferred to the rider’s neck during an impact. Recycled materials are used in the comfort liner to help reduce environmental impact, while integrated hydration tube channels in the cheek pads add practical functionality. The Alpinestars SM3 is a purpose-built helmet for riders seeking reliable MX, enduro, and off-road fitment with advanced impact management and ventilation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: XL\u003c\/li\u003e\n\u003cli\u003eModel: SM3 Helmet\u003c\/li\u003e\n\u003cli\u003eColor: Heat Gloss White\/Purple\/Pink\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 8301026-2052-XL\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: 8301026-2052-XL\u003c\/li\u003e\n\u003cli\u003eFitment: Designed for motocross, enduro, and off-road riding\u003c\/li\u003e\n\u003cli\u003eShell Construction: Varied-thickness thermo-injected polymer shell balances impact protection and reduced weight\u003c\/li\u003e\n\u003cli\u003eImpact Protection: Composite fiber layer positioned between the outer shell and EPS liner enhances impact protection\u003c\/li\u003e\n\u003cli\u003eEPS Liner: Six-piece, five-density liner manages impact energy and helps reduce overall weight\u003c\/li\u003e\n\u003cli\u003eRotational Impact Management: Low-friction coating helps reduce rotational acceleration during certain oblique impacts\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake ports and seven exhaust ports promote airflow and heat transfer\u003c\/li\u003e\n\u003cli\u003eVisor System: Visor directs airflow into the helmet and includes a predetermined-force release system\u003c\/li\u003e\n\u003cli\u003eEmergency Protection: Emergency Release System and removable cheek pads support safer helmet removal\u003c\/li\u003e\n\u003cli\u003eComfort Fit: Adjustable crown and cheek pads with contoured foam provide a tailored fit\u003c\/li\u003e\n\u003cli\u003eRetention: Soft 25 mm chin strap and stainless steel D-rings provide secure fastening\u003c\/li\u003e\n\u003cli\u003eHydration Compatibility: Integrated hydration tube channels are built into the cheek pads\u003c\/li\u003e\n\u003cli\u003eSustainable Materials: Comfort liner uses recycled materials\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564354437355,"sku":"01109025","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5488131.png?v=1790782563"},{"product_id":"alpinestars-sm3-heat-motocross-helmet-gloss-yellow-fluo-black-2xl-part-8301026-5011-xxl","title":"Alpinestars SM3 Heat Motocross Helmet Gloss Yellow Fluo\/Black 2XL, Part 8301026-5011-XXL","description":"SM3 Helmet - Heat - Gloss Yellow Fluo\/Black - 2XL\n\u003cp\u003eThe Alpinestars SM3 Heat Helmet is designed for motocross, enduro, and off-road riding. This 2XL helmet features a lightweight thermoplastic outer shell with varied thickness construction, providing a balanced combination of impact protection, comfort, and reduced weight. The gloss yellow fluo and black finish delivers a distinctive appearance while maintaining the performance-focused design expected from Alpinestars protective equipment.\u003c\/p\u003e\u003cp\u003eThe SM3 uses a composite fiber layer positioned between the outer shell and EPS liner to help manage impact energy. Its six-piece, multi-density EPS liner uses five densities in strategically selected areas for effective impact absorption and weight control. A low-friction coating on the main EPS liner helps reduce rotational acceleration associated with certain oblique impacts. The visor release system is engineered to release at a predetermined force, helping reduce forces transferred to the rider’s neck during an impact.\u003c\/p\u003e\u003cp\u003eVentilation is provided through ten intake ports and seven exhaust ports, while the visor directs airflow into the helmet for improved heat exchange. The comfort liner uses recycled materials and includes removable cheek pads with 3D-contoured foam for a secure, comfortable fit. Integrated hydration tube channels add convenience during extended rides. The 25 mm soft textile chin strap and stainless steel D-rings provide dependable retention and adjustment.\u003c\/p\u003e\u003cp\u003eThe helmet includes an Emergency Release System that allows the cheek pads to be removed while the helmet remains in place, supporting safer helmet removal after an incident. The Alpinestars SM3 Heat is sized 2XL and is identified by manufacturer part number 8301026-5011-XXL and vendor part number 8301026-5011-XXL.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 2XL\u003c\/li\u003e\n\u003cli\u003eModel: SM3 Heat\u003c\/li\u003e\n\u003cli\u003eColor: Gloss Yellow Fluo\/Black\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 8301026-5011-XXL\u003c\/li\u003e\n\u003cli\u003eVendor part number: 8301026-5011-XXL\u003c\/li\u003e\n\u003cli\u003eApplication: Designed for motocross, enduro, and off-road riding\u003c\/li\u003e\n\u003cli\u003eShell construction: Thermo-injected polymer shell with varied thickness for impact protection and reduced weight\u003c\/li\u003e\n\u003cli\u003eImpact protection: Composite fiber layer positioned between the outer shell and EPS liner\u003c\/li\u003e\n\u003cli\u003eEPS liner: Six-piece, five-density construction for targeted impact absorption\u003c\/li\u003e\n\u003cli\u003eRotational impact management: Low-friction coating helps reduce rotational acceleration during certain oblique impacts\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake ports and seven exhaust ports support airflow and heat exchange\u003c\/li\u003e\n\u003cli\u003eVisor: Airflow-directing design with a predetermined-force release system\u003c\/li\u003e\n\u003cli\u003eFit: Adjustable crown and cheek pads provide a tailored fit\u003c\/li\u003e\n\u003cli\u003eComfort liner: Recycled-material construction with removable, 3D-contoured cheek pads\u003c\/li\u003e\n\u003cli\u003eConvenience: Integrated hydration tube channels in the cheek pads\u003c\/li\u003e\n\u003cli\u003eRetention: 25 mm soft textile chin strap with stainless steel D-rings\u003c\/li\u003e\n\u003cli\u003eSafety system: Emergency Release System supports cheek-pad removal while the helmet is worn\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564359254251,"sku":"01109038","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5488332.png?v=1790782601"},{"product_id":"alpinestars-sm3-heat-helmet-gloss-yellow-fluo-black-medium-8301026-5011-m","title":"Alpinestars SM3 Heat Helmet Gloss Yellow Fluo\/Black Medium 8301026-5011-M","description":"SM3 Helmet - Heat - Gloss Yellow Fluo\/Black - Medium\n\u003cp\u003eThe Alpinestars SM3 Heat Helmet is designed for motocross, enduro, and off-road riding. This Medium helmet features a gloss yellow fluo and black finish, a lightweight impact-resistant thermoplastic outer shell, and a thermo-injected polymer shell engineered with varied thicknesses for an effective balance of protection and reduced weight. Manufacturer part number 8301026-5011-M and vendor part number 8301026-5011-M identify this specific Alpinestars SM3 configuration.\u003c\/p\u003e\u003cp\u003eProtection comes from a composite fiber layer positioned between the outer shell and EPS liner, along with a six-piece, multi-density EPS liner using five densities to manage impact energy in targeted areas. A low-friction coating on the polished inner EPS surface helps reduce rotational acceleration during certain oblique impacts. The visor release system is engineered to release at a predetermined force, helping reduce forces transferred to the rider’s neck during an impact. An Emergency Release System and removable cheek pads support safer helmet removal, while 3D-contoured comfort foam helps provide a secure, comfortable fit.\u003c\/p\u003e\u003cp\u003eTen intake vents and seven exhaust ports promote airflow and heat transfer, with the visor designed to direct air into the ventilation system. The crown and cheek pads allow the fit to be tailored to the rider, and integrated hydration tube channels add convenience during extended rides. A soft 1-inch chin strap and stainless steel D-rings provide dependable retention and comfort. The recycled-material comfort liner supports a lower-impact construction approach. This Alpinestars SM3 helmet is intended for riders seeking lightweight protection and ventilation for compatible MX, enduro, and off-road applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: Medium\u003c\/li\u003e\n\u003cli\u003eModel: SM3 Heat\u003c\/li\u003e\n\u003cli\u003eColor: Gloss Yellow Fluo\/Black\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 8301026-5011-M\u003c\/li\u003e\n\u003cli\u003eVendor part number: 8301026-5011-M\u003c\/li\u003e\n\u003cli\u003eApplication: Designed for motocross, enduro, and off-road riding\u003c\/li\u003e\n\u003cli\u003eShell: Varied-thickness thermo-injected polymer shell with an impact-resistant thermoplastic outer layer\u003c\/li\u003e\n\u003cli\u003eImpact management: Composite fiber layer and six-piece, five-density EPS liner\u003c\/li\u003e\n\u003cli\u003eRotational impact support: Low-friction EPS coating helps reduce rotational acceleration during certain oblique impacts\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake vents and seven exhaust ports promote airflow and heat exchange\u003c\/li\u003e\n\u003cli\u003eFit: Adjustable crown and cheek pads with 3D-contoured comfort foam\u003c\/li\u003e\n\u003cli\u003eSafety: Emergency Release System, removable cheek pads, visor release system, soft 1-inch chin strap, and stainless steel D-rings\u003c\/li\u003e\n\u003cli\u003eConvenience: Integrated hydration tube channels in the cheek pads\u003c\/li\u003e\n\u003cli\u003eComfort liner: Constructed using recycled materials\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564361056491,"sku":"01109035","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5488321.png?v=1790782637"},{"product_id":"alpinestars-sm3-helmet-heat-gloss-yellow-fluo-black-small-8301026-5011-s","title":"Alpinestars SM3 Helmet Heat Gloss Yellow Fluo\/Black Small 8301026-5011-S","description":"SM3 Helmet - Heat - Gloss Yellow Fluo\/Black - Small\n\u003cp\u003eThe Alpinestars SM3 Helmet in Heat Gloss Yellow Fluo\/Black, size Small, is engineered for motocross, enduro, and off-road riding. Its thermo-injected shell uses a polymer blend with varied thicknesses to balance impact protection and reduced weight. The lightweight outer shell is made from impact-resistant thermoplastic, while a composite-fiber inner shell positioned between the outer shell and EPS liner adds another layer of protection. Manufacturer part number 8301026-5011-S and vendor part number 8301026-5011-S identify this specific Small helmet configuration.\u003c\/p\u003e\u003cp\u003eInside, the six-piece EPS liner uses five densities to manage impact energy in targeted areas while helping reduce overall weight. A polished EPS surface with a low-friction coating helps minimize rotational acceleration associated with certain oblique impacts. The inner and outer surfaces are designed to help reduce the effects of angled impacts. Crown and cheek pads allow the fit to be tailored to the rider, while removable cheek pads and the Emergency Release System support safer helmet removal following an incident.\u003c\/p\u003e\u003cp\u003eTen intake vents and seven exhaust ports promote airflow and heat transfer, with the visor directing air toward the ventilation channels. The visor release system is designed to release at a predetermined force to help reduce loads on the rider’s neck during an impact. The comfort liner uses recycled materials, and integrated hydration tube channels in the cheek pads improve convenience during extended rides. A soft 25 mm chin strap and stainless steel D-rings provide a comfortable, secure fit. The Alpinestars SM3 is intended for riders seeking a lightweight, protective helmet for demanding off-road applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: Designed for motocross, enduro, and off-road riding\u003c\/li\u003e\n\u003cli\u003eShell Construction: Thermo-injected polymer shell with varied thicknesses for an optimized balance of protection and weight\u003c\/li\u003e\n\u003cli\u003eOuter Shell: Impact-resistant thermoplastic construction\u003c\/li\u003e\n\u003cli\u003eInner Shell: Composite-fiber layer positioned between the outer shell and EPS liner for added impact protection\u003c\/li\u003e\n\u003cli\u003eEPS Liner: Six-piece, five-density design for targeted impact absorption and reduced weight\u003c\/li\u003e\n\u003cli\u003eRotational Impact Management: Low-friction EPS coating helps reduce rotational acceleration during certain oblique impacts\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake vents and seven exhaust ports support airflow and heat exchange\u003c\/li\u003e\n\u003cli\u003eVisor: Air-directing design with a release system calibrated to help reduce neck forces during impact\u003c\/li\u003e\n\u003cli\u003eFit: Adjustable crown and cheek pads provide a tailored fit\u003c\/li\u003e\n\u003cli\u003eEmergency Protection: Emergency Release System and removable cheek pads support safer helmet removal\u003c\/li\u003e\n\u003cli\u003eComfort Liner: Recycled-material liner helps reduce environmental impact\u003c\/li\u003e\n\u003cli\u003eHydration Support: Integrated hydration tube channels in the cheek pads\u003c\/li\u003e\n\u003cli\u003eChin Strap: Soft 25 mm textile strap for comfort and safety\u003c\/li\u003e\n\u003cli\u003eRetention: Stainless steel D-rings provide a secure fit\u003c\/li\u003e\n\u003cli\u003eSize: Small\u003c\/li\u003e\n\u003cli\u003eColor: Heat Gloss Yellow Fluo\/Black\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eModel: SM3\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 8301026-5011-S\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: 8301026-5011-S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564367446251,"sku":"01109034","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5488214.png?v=1790782669"},{"product_id":"alpinestars-sm3-helmet-heat-gloss-red-white-black-2xl-part-number-8301026-3126-xxl","title":"Alpinestars SM3 Helmet Heat Gloss Red\/White\/Black 2XL, Part Number 8301026-3126-XXL","description":"SM3 Helmet - Heat - Gloss Red\/White\/Black - 2XL\n\u003cp\u003eThe Alpinestars SM3 Helmet in Heat Gloss Red\/White\/Black, size 2XL, is designed for motocross, enduro, and off-road riding. Its thermo-injected shell uses a polymer blend with varied thicknesses to provide an effective balance of impact protection, light weight, and rider comfort. The lightweight outer shell is made from impact-resistant thermoplastic, while a composite fiber layer between the shell and EPS liner helps improve protection during impacts.\u003c\/p\u003e\u003cp\u003eThe SM3 helmet features a six-piece, multi-density EPS liner with five carefully selected densities to manage impact performance and reduce overall weight. A low-friction coating on the inner EPS surface helps reduce rotational acceleration during certain oblique impacts, while the outer and inner surfaces are engineered to help minimize oblique-impact effects. Ten intake vents and seven exhaust ports promote airflow and heat exchange, with the visor designed to direct air into the ventilation system for improved cooling.\u003c\/p\u003e\u003cp\u003eFit and convenience are supported by adjustable crown and cheek pads, a soft 1-inch chin strap, stainless steel D-rings, and removable cheek pads. The Emergency Release System allows the cheek pads to be removed while the helmet remains in place, supporting safer helmet removal after an incident. Integrated hydration tube channels in the cheek pads add practical functionality for off-road riders. The recycled-material comfort liner helps reduce environmental impact without compromising comfort. The Alpinestars SM3 Helmet is supplied by the manufacturer under vendor part number 8301026-3126-XXL and is intended for riders seeking dependable off-road head protection with tailored fit and ventilation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication: Designed for motocross, enduro, and off-road riding\u003c\/li\u003e\n\u003cli\u003eShell construction: Thermo-injected polymer blend with varied thickness for balanced impact protection and reduced weight\u003c\/li\u003e\n\u003cli\u003eOuter shell: Lightweight impact-resistant thermoplastic construction\u003c\/li\u003e\n\u003cli\u003eProtection layer: Composite fiber layer positioned between the outer shell and EPS liner for added impact protection\u003c\/li\u003e\n\u003cli\u003eEPS liner: Six-piece, multi-density liner using five densities for targeted impact absorption and weight management\u003c\/li\u003e\n\u003cli\u003eRotational impact management: Low-friction coating helps reduce rotational acceleration during certain oblique impacts\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake vents and seven exhaust ports support airflow and heat transfer\u003c\/li\u003e\n\u003cli\u003eVisor design: Directs air into the helmet ventilation ports\u003c\/li\u003e\n\u003cli\u003eVisor release: Predetermined-force release system helps reduce forces transferred to the rider’s neck during an impact\u003c\/li\u003e\n\u003cli\u003eFit: Adjustable crown and cheek pads allow the fit to be tailored to the rider\u003c\/li\u003e\n\u003cli\u003eEmergency protection: Emergency Release System and removable cheek pads support safer helmet removal\u003c\/li\u003e\n\u003cli\u003eComfort liner: Recycled-material construction helps reduce the product’s carbon footprint\u003c\/li\u003e\n\u003cli\u003eHydration compatibility: Integrated hydration tube channels in the cheek pads\u003c\/li\u003e\n\u003cli\u003eChin strap: Soft 1-inch textile strap provides secure, comfortable retention\u003c\/li\u003e\n\u003cli\u003eRetention system: Stainless steel D-rings provide a secure fit\u003c\/li\u003e\n\u003cli\u003eSize: 2XL\u003c\/li\u003e\n\u003cli\u003eColor: Heat Gloss Red\/White\/Black\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eModel: SM3\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 8301026-3126-XXL\u003c\/li\u003e\n\u003cli\u003eVendor part number: 8301026-3126-XXL\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564368363755,"sku":"01109032","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5488157.png?v=1790782709"},{"product_id":"alpinestars-sm3-heat-motocross-helmet-gloss-red-white-black-xs-8301026-3126-xs","title":"Alpinestars SM3 Heat Motocross Helmet Gloss Red\/White\/Black XS 8301026-3126-XS","description":"SM3 Helmet - Heat - Gloss Red\/White\/Black - XS\n\u003cp\u003eThe Alpinestars SM3 Heat helmet is engineered for motocross, enduro, and off-road riding, delivering a balanced combination of impact protection, low weight, ventilation, and rider comfort. This extra-small helmet features a gloss red, white, and black finish and uses a thermo-injected shell made from an impact-resistant thermoplastic polymer blend. The varied shell thickness is designed to optimize protection while helping reduce overall weight. Manufacturer part number 8301026-3126-XS and vendor part number 8301026-3126-XS identify this specific configuration.\u003c\/p\u003e\u003cp\u003eInside, the SM3 uses a six-piece EPS liner with five distinct densities to manage impact performance in targeted areas. A low-friction coating on the main EPS liner and polished inner surfaces help reduce friction and rotational acceleration associated with certain oblique impacts. The composite fiber layer positioned between the outer shell and EPS liner adds another level of impact protection. Crown and cheek pads allow the fit to be tailored to the rider, while the removable cheek pads and Emergency Release System support safer helmet removal after an incident.\u003c\/p\u003e\u003cp\u003eTen intake vents and seven exhaust ports promote airflow and heat transfer, with the visor directing air toward the ventilation channels. The visor release system is designed to release at a predetermined force to help reduce forces transmitted to the rider's neck during an impact. Recycled materials are used in the comfort liner to help reduce environmental impact, and integrated hydration tube channels in the cheek pads improve convenience during extended rides. A soft 1-inch chin strap and stainless steel D-rings provide secure, comfortable retention.\u003c\/p\u003e\u003cp\u003eDesigned for riders who need dependable off-road protection and adaptable comfort, the Alpinestars SM3 fits motocross, enduro, and other off-road applications. Select the XS size only when it corresponds to the rider's proper head measurement and helmet fit requirements.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: Extra Small (XS)\u003c\/li\u003e\n\u003cli\u003eModel: SM3 Heat\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 8301026-3126-XS\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: 8301026-3126-XS\u003c\/li\u003e\n\u003cli\u003eColor: Gloss Red, White, and Black\u003c\/li\u003e\n\u003cli\u003eApplication: Motocross, enduro, and off-road riding\u003c\/li\u003e\n\u003cli\u003eShell Construction: Thermo-injected impact-resistant thermoplastic polymer blend with varied thickness\u003c\/li\u003e\n\u003cli\u003eImpact Management: Six-piece EPS liner using five densities for targeted impact absorption\u003c\/li\u003e\n\u003cli\u003eRotational Impact Management: Low-friction coating and polished EPS surfaces help reduce rotational acceleration\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake vents and seven exhaust ports\u003c\/li\u003e\n\u003cli\u003eFit System: Adjustable crown and cheek pads with removable cheek pads\u003c\/li\u003e\n\u003cli\u003eSafety System: Emergency Release System and visor release system\u003c\/li\u003e\n\u003cli\u003eRetention: 1-inch soft textile chin strap with stainless steel D-rings\u003c\/li\u003e\n\u003cli\u003eHydration Support: Integrated hydration tube channels in the cheek pads\u003c\/li\u003e\n\u003cli\u003eComfort Liner: Recycled-material construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564374294763,"sku":"01109027","price":279.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5488310.png?v=1790782736"},{"product_id":"alpinestars-sm3-heat-helmet-gloss-white-purple-pink-large-8301026-2052-l","title":"Alpinestars SM3 Heat Helmet Gloss White\/Purple\/Pink Large 8301026-2052-L","description":"SM3 Helmet - Heat - Gloss White\/Purple\/Pink - Large\n\u003cp\u003eThe Alpinestars SM3 Heat Helmet is engineered for motocross, enduro, and off-road riding, delivering a balanced combination of impact protection, low weight, ventilation, and rider comfort. This Large helmet features a gloss white, purple, and pink finish and uses a thermo-injected shell made from an impact-resistant thermoplastic polymer blend with varied thicknesses for optimized protection. Manufacturer part number 8301026-2052-L and vendor part number 8301026-2052-L identify this Alpinestars helmet configuration.\u003c\/p\u003e\u003cp\u003eIts lightweight outer shell is paired with a composite fiber layer and a six-piece, multi-density EPS liner designed to manage impact energy across key areas of the helmet. A polished EPS surface with a low-friction coating helps reduce rotational acceleration associated with certain oblique impacts. The crown and cheek pads allow the fit to be tailored to the rider, while removable cheek pads and the integrated Emergency Release System support safer helmet removal after an incident. Stainless steel D-rings provide a secure, adjustable closure, and the 25 mm soft textile chin strap helps improve comfort during extended rides.\u003c\/p\u003e\u003cp\u003eTen intake vents and seven exhaust ports promote airflow and heat exchange, with the visor designed to direct air into the ventilation system. The visor release system is calibrated to release at a predetermined force, helping reduce forces transferred to the rider’s neck during an impact. Recycled materials in the comfort liner help reduce environmental impact, while integrated hydration tube channels in the cheek pads add practical convenience for off-road use. The Alpinestars SM3 fits riders seeking dependable protection and performance for motocross, enduro, and off-road applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: Large\u003c\/li\u003e\n\u003cli\u003eModel: SM3 Heat\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 8301026-2052-L\u003c\/li\u003e\n\u003cli\u003eVendor part number: 8301026-2052-L\u003c\/li\u003e\n\u003cli\u003eFinish: Gloss white, purple, and pink\u003c\/li\u003e\n\u003cli\u003eApplication: Motocross, enduro, and off-road riding\u003c\/li\u003e\n\u003cli\u003eShell construction: Thermo-injected impact-resistant thermoplastic polymer blend with varied thickness\u003c\/li\u003e\n\u003cli\u003eImpact protection: Composite fiber layer and six-piece, five-density EPS liner\u003c\/li\u003e\n\u003cli\u003eRotational impact management: Low-friction coating on the inner EPS liner\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake vents and seven exhaust ports\u003c\/li\u003e\n\u003cli\u003eFit adjustment: Removable crown and cheek pads\u003c\/li\u003e\n\u003cli\u003eEmergency protection: Emergency Release System with removable cheek pads\u003c\/li\u003e\n\u003cli\u003eClosure: Stainless steel D-rings and 1-inch soft textile chin strap\u003c\/li\u003e\n\u003cli\u003eConvenience: Integrated hydration tube channels in the cheek pads\u003c\/li\u003e\n\u003cli\u003eVisor safety: Predetermined-force visor release system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564390875371,"sku":"01109024","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5488289.png?v=1790782772"},{"product_id":"alpinestars-sm3-heat-helmet-gloss-white-purple-pink-medium-8301026-2052-m","title":"Alpinestars SM3 Heat Helmet Gloss White\/Purple\/Pink Medium 8301026-2052-M","description":"SM3 Helmet - Heat - Gloss White\/Purple\/Pink - Medium\n\u003cp\u003eThe Alpinestars SM3 Heat Helmet is designed for motocross, enduro, and off-road riding, delivering a balanced combination of impact protection, low weight, ventilation, and comfort. This Medium helmet features a gloss white, purple, and pink Heat graphic and uses a thermo-injected polymer shell engineered with varied thicknesses to optimize protection where it is needed while helping reduce overall weight. The lightweight outer shell is made from impact-resistant thermoplastic, with a composite-fiber inner shell positioned between the outer shell and the EPS liner for added impact protection.\u003c\/p\u003e\u003cp\u003eInside, the SM3 uses a six-piece, multi-density EPS liner with five foam densities to manage impact energy across different areas of the helmet. A low-friction coating on the main EPS liner and comfort liner helps reduce rotational acceleration associated with certain oblique impacts. The crown and cheek pads can be tailored for a more personalized fit, while the removable cheek pads and Emergency Release System support safer helmet removal after an incident. Stainless steel D-rings and a soft 1-inch chin strap provide secure, comfortable retention.\u003c\/p\u003e\u003cp\u003eTen intake vents and seven exhaust ports promote airflow and heat exchange, with the visor designed to direct air into the ventilation channels. The visor release system is engineered to release at a predetermined force to help reduce forces transferred to the rider’s neck during an impact. Recycled materials are used in the comfort liner to help reduce environmental impact, and integrated hydration tube channels in the cheek pads add convenience for extended rides. The Alpinestars SM3 Helmet is manufacturer part number 8301026-2052-M and vendor part number 8301026-2052-M. It is sized Medium and intended for compatible motocross, enduro, and off-road applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: Medium\u003c\/li\u003e\n\u003cli\u003eModel: SM3 Heat\u003c\/li\u003e\n\u003cli\u003eColor: Gloss white, purple, and pink\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eManufacturer: Alpinestars\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 8301026-2052-M\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: 8301026-2052-M\u003c\/li\u003e\n\u003cli\u003eApplication: Motocross, enduro, and off-road riding\u003c\/li\u003e\n\u003cli\u003eShell Construction: Thermo-injected polymer shell with varied thicknesses for a balance of impact protection and reduced weight\u003c\/li\u003e\n\u003cli\u003eImpact Protection: Composite-fiber inner shell and six-piece, five-density EPS liner for controlled impact absorption\u003c\/li\u003e\n\u003cli\u003eRotational Impact Management: Low-friction coating helps reduce rotational acceleration during certain oblique impacts\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake vents and seven exhaust ports promote airflow and heat exchange\u003c\/li\u003e\n\u003cli\u003eFit: Adjustable crown and cheek pads provide a tailored fit\u003c\/li\u003e\n\u003cli\u003eEmergency Protection: Emergency Release System and removable cheek pads support safer helmet removal\u003c\/li\u003e\n\u003cli\u003eRetention: Stainless steel D-rings and a soft 1-inch chin strap provide secure fastening\u003c\/li\u003e\n\u003cli\u003eVisor: Release system is designed to disengage at a predetermined force during an impact\u003c\/li\u003e\n\u003cli\u003eConvenience: Integrated hydration tube channels are built into the cheek pads\u003c\/li\u003e\n\u003cli\u003eComfort Liner: Recycled materials help reduce the product’s environmental footprint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564406210795,"sku":"01109023","price":279.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/5488292.png?v=1790782813"},{"product_id":"alpinestars-youth-sm3-fray-helmet-gloss-red-yellow-fluo-black-large-8301625-3051-yl","title":"Alpinestars Youth SM3 Fray Helmet Gloss Red\/Yellow Fluo\/Black Large 8301625-3051-YL","description":"Youth SM3 Helmet - Fray - Gloss Red\/Yellow Fluo\/Black - Large\n\u003cp\u003eThe Alpinestars Youth SM3 Fray Helmet is designed for young off-road riders who need dependable impact protection, a secure fit, and effective ventilation. This large helmet features a thermo-injected shell made from an advanced impact-resistant thermoplastic polymer blend. The shell uses varied thicknesses to balance lightweight performance with structural protection. Its multiple-density inner liner places the appropriate density in key areas to help absorb impact energy while minimizing overall weight.\u003c\/p\u003e\u003cp\u003eEngineered inner and outer surfaces help reduce the effects of oblique impacts. A low-friction coating on the main EPS liner creates a slip-plane effect intended to reduce rotational acceleration forces during certain angled impacts. Ten intake vents and seven exhaust ports promote airflow and heat exchange, while the visor is shaped to direct air toward the ventilation openings. The visor release system is designed to release at a predetermined force, helping reduce forces transferred to the rider’s neck during an impact.\u003c\/p\u003e\u003cp\u003eThe Alpinestars Youth SM3 also includes a comfort liner made with recycled materials, integrated hydration tube channels in the cheek pads, and a soft 1-inch chin strap for comfort and safety. Removable cheek pads and the Emergency Release System support safer helmet removal after an incident. Three-dimensional contoured foam enhances comfort, while stainless steel D-rings provide a secure, adjustable closure. The crown and cheek pads are replaceable in different thicknesses, allowing the fit to be tailored to the rider’s head. This large youth model is finished in Gloss Red, Yellow Fluo, and Black and carries manufacturer and vendor part number 8301625-3051-YL.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThermo-injected shell: Advanced impact-resistant thermoplastic construction with varied thicknesses for a balance of protection and low weight\u003c\/li\u003e\n\u003cli\u003eLightweight outer shell: Technologically advanced thermoplastic material helps reduce helmet weight\u003c\/li\u003e\n\u003cli\u003eMultiple-density liner: Uses different foam densities in targeted areas to support impact absorption\u003c\/li\u003e\n\u003cli\u003eOblique impact management: Engineered inner and outer surfaces help minimize the effects of angled impacts\u003c\/li\u003e\n\u003cli\u003eLow-friction EPS coating: Slip-plane layer is designed to reduce rotational acceleration forces from certain oblique impacts\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake vents and seven exhaust ports support airflow and heat transfer\u003c\/li\u003e\n\u003cli\u003eVisor airflow design: Directs air toward the helmet’s ventilation ports\u003c\/li\u003e\n\u003cli\u003eVisor release system: Releases the visor at a predetermined force to help reduce neck loading during an impact\u003c\/li\u003e\n\u003cli\u003eCustomizable fit: Replaceable crown and cheek pads are available in different thicknesses\u003c\/li\u003e\n\u003cli\u003eRecycled comfort liner: Uses recycled materials to help reduce environmental impact\u003c\/li\u003e\n\u003cli\u003eHydration routing: Integrated channels in the cheek pads accommodate a hydration tube\u003c\/li\u003e\n\u003cli\u003eEmergency Release System: Removable cheek pads support safer, easier helmet removal\u003c\/li\u003e\n\u003cli\u003eComfort padding: Three-dimensionally contoured foam improves rider comfort\u003c\/li\u003e\n\u003cli\u003eChin strap: Soft 1-inch strap provides comfort and secure retention\u003c\/li\u003e\n\u003cli\u003eClosure: Stainless steel D-rings provide a tight, secure fit\u003c\/li\u003e\n\u003cli\u003eSize and model: Large Alpinestars Youth SM3 helmet in Fray Gloss Red, Yellow Fluo, and Black\u003c\/li\u003e\n\u003cli\u003eManufacturer and vendor part number: Alpinestars 8301625-3051-YL\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564539314411,"sku":"01111649","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/4036181.png?v=1790783168"},{"product_id":"alpinestars-youth-sm3-fray-helmet-medium-gloss-red-yellow-fluo-black-8301625-3051-ym","title":"Alpinestars Youth SM3 Fray Helmet Medium Gloss Red\/Yellow Fluo\/Black 8301625-3051-YM","description":"Youth SM3 Helmet - Fray - Gloss Red\/Yellow Fluo\/Black - Medium\n\u003cp\u003eThe Alpinestars Youth SM3 Fray Helmet is designed for young off-road riders who need dependable impact protection, low weight, and a secure, comfortable fit. This Medium helmet features a gloss red, yellow fluo, and black finish, along with a thermo-injected shell made from an impact-resistant thermoplastic polymer blend. Varying shell thicknesses help balance protection and weight, while the multi-density inner liner places the appropriate density in key areas to improve impact absorption.\u003c\/p\u003e\u003cp\u003eThe inner and outer helmet surfaces are engineered to help reduce the effects of oblique impacts. A low-friction coating on the main EPS liner creates a slip plane designed to help reduce rotational acceleration forces during certain angled impacts. Ten intake vents and seven exhaust ports maximize airflow and heat exchange, while the visor directs air into the ventilation system. The visor release system is calibrated to release at a predetermined force, helping reduce forces transferred to the rider’s neck during an impact.\u003c\/p\u003e\u003cp\u003eFit can be customized with replaceable crown and cheek pads available in different thicknesses. The comfort liner uses recycled materials, and integrated hydration tube channels in the cheek pads support convenient hydration system routing. A soft 25 mm chin strap, stainless steel D-rings, 3D-contoured cheek pad foam, and an Emergency Release System help provide a secure and comfortable fit. The removable cheek pads allow safer, easier helmet removal while the helmet remains in place. The Alpinestars Youth SM3 Helmet is intended for youth riders and is identified by manufacturer and vendor part number 8301625-3051-YM.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYouth Medium fit with a gloss red, yellow fluo, and black Fray graphic\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eModel: Youth SM3\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 8301625-3051-YM\u003c\/li\u003e\n\u003cli\u003eVendor part number: 8301625-3051-YM\u003c\/li\u003e\n\u003cli\u003eThermo-injected impact-resistant thermoplastic shell with a lightweight polymer blend\u003c\/li\u003e\n\u003cli\u003eMulti-density inner liner for targeted impact absorption and reduced weight\u003c\/li\u003e\n\u003cli\u003eLow-friction EPS liner coating designed to reduce rotational acceleration from certain oblique impacts\u003c\/li\u003e\n\u003cli\u003eTen intake vents and seven exhaust ports for enhanced ventilation and heat exchange\u003c\/li\u003e\n\u003cli\u003eVisor designed to direct airflow into the helmet’s ventilation ports\u003c\/li\u003e\n\u003cli\u003eVisor release system calibrated to help reduce forces on the rider’s neck during an impact\u003c\/li\u003e\n\u003cli\u003eReplaceable crown and cheek pads allow the fit to be tailored to the rider\u003c\/li\u003e\n\u003cli\u003eRecycled-material comfort liner helps reduce environmental impact\u003c\/li\u003e\n\u003cli\u003eIntegrated hydration tube channels in the cheek pads\u003c\/li\u003e\n\u003cli\u003eSoft 25 mm chin strap for rider comfort and secure retention\u003c\/li\u003e\n\u003cli\u003eEmergency Release System with removable cheek pads for easier helmet removal\u003c\/li\u003e\n\u003cli\u003e3D-contoured foam supports comfort and fit\u003c\/li\u003e\n\u003cli\u003eStainless steel D-rings provide secure fastening\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564547145963,"sku":"01111648","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/4036182.png?v=1790783203"},{"product_id":"alpinestars-youth-sm3-fray-helmet-gloss-red-yellow-fluo-black-small-8301625-3051-ys","title":"Alpinestars Youth SM3 Fray Helmet Gloss Red\/Yellow Fluo\/Black Small 8301625-3051-YS","description":"Youth SM3 Helmet - Fray - Gloss Red\/Yellow Fluo\/Black - Small\n\u003cp\u003eThe Alpinestars Youth SM3 Fray Helmet is designed for young riders who need dependable impact protection, ventilation, and a comfortable fit for off-road riding. Finished in Gloss Red, Yellow Fluo, and Black, this Small helmet features a thermo-injected shell made from an advanced impact-resistant thermoplastic polymer blend. The shell is engineered with varying thicknesses to balance lightweight performance and protection.\u003c\/p\u003e\u003cp\u003eIts multiple-density inner liner provides targeted impact absorption, while the low-friction coating inside the main EPS liner is designed to help reduce rotational acceleration during certain oblique impacts. The inner and outer surfaces are engineered to help minimize the effects of oblique forces. Ten intake vents and seven exhaust ports promote airflow and heat transfer, with the visor designed to direct air into the ventilation system for improved cooling.\u003c\/p\u003e\u003cp\u003eFit can be customized with replacement crown and cheek pads available in different thicknesses. The recycled-material comfort liner helps reduce environmental impact, while 3D-contoured foam supports a secure and comfortable fit. Integrated hydration tube channels in the cheek pads add convenience for riders using hydration systems. A soft 25 mm chin strap and stainless steel D-rings provide secure retention, and the Emergency Release System with removable cheek pads allows safer, easier helmet removal after an incident.\u003c\/p\u003e\u003cp\u003eThe visor release system is engineered to release at a predetermined force to help reduce stress on the rider’s neck during an impact. The Alpinestars Youth SM3 is supplied in Small sizing and is intended for youth off-road riders. Manufacturer part number 8301625-3051-YS and vendor part number 8301625-3051-YS identify this specific Gloss Red\/Yellow Fluo\/Black configuration.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThermo-injected shell: Advanced impact-resistant thermoplastic construction balances protection and light weight.\u003c\/li\u003e\n\u003cli\u003eMultiple-density liner: Provides targeted impact absorption in key areas while helping reduce overall helmet weight.\u003c\/li\u003e\n\u003cli\u003eLow-friction EPS coating: Helps reduce rotational acceleration forces associated with certain oblique impacts.\u003c\/li\u003e\n\u003cli\u003eOptimized ventilation: Ten intake vents and seven exhaust ports promote airflow and heat transfer.\u003c\/li\u003e\n\u003cli\u003eCustomizable fit: Crown and cheek pads are available in different thicknesses for a more tailored fit.\u003c\/li\u003e\n\u003cli\u003eVisor release system: Releases at a predetermined force to help reduce stress on the rider’s neck during an impact.\u003c\/li\u003e\n\u003cli\u003eRecycled comfort liner: Uses recycled materials to help reduce the helmet’s environmental footprint.\u003c\/li\u003e\n\u003cli\u003eHydration tube channels: Integrated into the cheek pads for convenient hydration-system routing.\u003c\/li\u003e\n\u003cli\u003eEmergency Release System: Removable cheek pads support safer and easier helmet removal while the helmet is still worn.\u003c\/li\u003e\n\u003cli\u003eSecure retention: A soft 25 mm chin strap and stainless steel D-rings provide a reliable fit.\u003c\/li\u003e\n\u003cli\u003eSize and finish: Youth Small in Gloss Red, Yellow Fluo, and Black.\u003c\/li\u003e\n\u003cli\u003eBrand and part number: Alpinestars SM3, manufacturer and vendor part number 8301625-3051-YS.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564576768235,"sku":"01111647","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/4036440.png?v=1790783244"},{"product_id":"alpinestars-youth-sm3-fray-helmet-gloss-black-orange-yellow-fluo-medium-8301625-1455-ym","title":"Alpinestars Youth SM3 Fray Helmet Gloss Black\/Orange\/Yellow Fluo Medium 8301625-1455-YM","description":"Youth SM3 Helmet - Fray - Gloss Black\/Orange\/Yellow Fluo - Medium\n\u003cp\u003eThe Alpinestars Youth SM3 Fray Helmet is designed for young riders who need dependable impact protection, lightweight performance, and a secure, comfortable fit. This medium helmet features a thermo-injected shell made from an advanced impact-resistant thermoplastic polymer blend. Varying shell thicknesses help balance strength and weight, while the multiple-density inner liner places the appropriate density in key areas to improve impact absorption.\u003c\/p\u003e\u003cp\u003eEngineered for protection during angled impacts, the Youth SM3 uses low-friction surfaces on the inner and outer construction to help reduce rotational forces. A low-friction coating on the main EPS liner creates a slip-plane effect, helping manage rotational acceleration that can occur during certain oblique impacts. The visor release system is calibrated to release at a predetermined force, helping reduce transmitted forces to the rider’s neck during an impact.\u003c\/p\u003e\u003cp\u003eVentilation is supported by ten intake ports and seven exhaust ports, with the visor shaped to help direct airflow into the helmet. The comfort liner uses recycled materials, while integrated hydration-tube channels in the cheek pads add convenience for extended rides. A soft 25 mm chin strap, stainless-steel D-rings, and an adjustable fit system help provide a secure, comfortable fit. Crown and cheek pads are available in different thicknesses as replacement components, allowing the fit to be tailored to the rider’s head.\u003c\/p\u003e\u003cp\u003eThe Alpinestars Youth SM3 also includes an Emergency Release System and removable cheek pads for easier, safer helmet removal after an incident. Three-dimensionally contoured cheek-pad foam enhances comfort and fit. The Alpinestars Youth SM3 Fray Helmet is finished in Gloss Black, Orange, and Yellow Fluo and is identified by manufacturer and vendor part number 8301625-1455-YM.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImpact-resistant thermo-injected thermoplastic shell with a lightweight polymer construction\u003c\/li\u003e\n\u003cli\u003eMultiple-density EPS inner liner for targeted impact absorption and reduced overall weight\u003c\/li\u003e\n\u003cli\u003eLow-friction inner and outer surfaces designed to help reduce rotational forces during oblique impacts\u003c\/li\u003e\n\u003cli\u003eVisor release system calibrated to release at a predetermined force during an impact\u003c\/li\u003e\n\u003cli\u003eTen intake ports and seven exhaust ports for enhanced ventilation and heat exchange\u003c\/li\u003e\n\u003cli\u003eRecycled-material comfort liner helps reduce environmental impact\u003c\/li\u003e\n\u003cli\u003eIntegrated hydration-tube channels in the cheek pads for convenient hydration routing\u003c\/li\u003e\n\u003cli\u003eSoft 25 mm chin strap and stainless-steel D-rings provide a secure, comfortable fit\u003c\/li\u003e\n\u003cli\u003eEmergency Release System and removable cheek pads support safer helmet removal\u003c\/li\u003e\n\u003cli\u003eReplaceable crown and cheek pads available in different thicknesses for customized fit\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eModel: Youth SM3 Fray\u003c\/li\u003e\n\u003cli\u003eSize: Medium\u003c\/li\u003e\n\u003cli\u003eColor: Gloss Black\/Orange\/Yellow Fluo\u003c\/li\u003e\n\u003cli\u003eManufacturer and vendor part number: 8301625-1455-YM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564596691179,"sku":"01111645","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/4036439.png?v=1790783272"},{"product_id":"alpinestars-youth-sm3-fray-helmet-gloss-black-orange-yellow-fluo-small-8301625-1455-ys","title":"Alpinestars Youth SM3 Fray Helmet Gloss Black\/Orange\/Yellow Fluo Small 8301625-1455-YS","description":"Youth SM3 Helmet - Fray - Gloss Black\/Orange\/Yellow Fluo - Small\n\u003cp\u003eThe Alpinestars Youth SM3 Fray Helmet is designed for young off-road riders who need dependable impact protection, low weight, and a secure, comfortable fit. This Small helmet features a thermo-injected shell made from an advanced impact-resistant thermoplastic polymer blend. Varying shell thicknesses help balance protection and weight, while the multiple-density inner liner places the appropriate density in key areas for effective impact absorption.\u003c\/p\u003e\u003cp\u003eThe Alpinestars Youth SM3 uses engineered inner and outer surfaces to help minimize the effects of oblique impacts. A low-friction coating on the primary EPS liner creates a slip-plane effect intended to reduce rotational acceleration forces during certain angled impacts. The visor release system is calibrated to release at a predetermined force, helping reduce loads transferred to the rider’s neck during an impact. Ten intake vents and seven exhaust ports promote airflow and heat exchange, while the visor directs air toward the ventilation channels.\u003c\/p\u003e\u003cp\u003eComfort and usability are built into the SM3 design. The crown and cheek pads can be replaced with optional thicknesses to tailor the fit, and the recycled-material comfort liner helps reduce environmental impact. Integrated hydration tube channels in the cheek pads support convenient hydration system routing. A soft 1-inch chin strap, stainless steel D-rings, and a secure retention system help maintain a stable fit. The Emergency Release System and removable cheek pads allow safer, easier helmet removal by trained personnel while the helmet remains on the rider. The Alpinestars Youth SM3 Fray Helmet is finished in Gloss Black\/Orange\/Yellow Fluo and is supplied in Small size under manufacturer and vendor part number 8301625-1455-YS.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThermo-injected shell: Advanced impact-resistant thermoplastic construction with variable thickness for a balance of protection and reduced weight.\u003c\/li\u003e\n\u003cli\u003eMultiple-density liner: Uses targeted foam densities to support effective impact absorption while helping control overall helmet weight.\u003c\/li\u003e\n\u003cli\u003eOblique-impact management: Low-friction liner coating and engineered shell surfaces help reduce rotational acceleration forces from certain angled impacts.\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake vents and seven exhaust ports promote airflow and heat transfer through the helmet.\u003c\/li\u003e\n\u003cli\u003eVisor release system: Calibrated release design helps reduce forces transferred to the rider’s neck during an impact.\u003c\/li\u003e\n\u003cli\u003eAdjustable fit: Replaceable crown and cheek pads in different thicknesses allow the fit to be tailored to the rider.\u003c\/li\u003e\n\u003cli\u003eEmergency Release System: Removable cheek pads support safer and easier helmet removal by trained personnel.\u003c\/li\u003e\n\u003cli\u003eHydration routing: Integrated channels in the cheek pads help manage a hydration tube.\u003c\/li\u003e\n\u003cli\u003eRetention system: Soft 1-inch chin strap and stainless steel D-rings provide a secure, comfortable fit.\u003c\/li\u003e\n\u003cli\u003eFinish and fitment: Gloss Black\/Orange\/Yellow Fluo Alpinestars Youth SM3 Fray helmet in Small size for young off-road riders; manufacturer and vendor part number 8301625-1455-YS.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564610814187,"sku":"01111644","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/4036438.png?v=1790783310"},{"product_id":"alpinestars-youth-sm3-radium-helmet-matte-gray-black-yellow-fluo-large-8301825-9510-yl","title":"Alpinestars Youth SM3 Radium Helmet Matte Gray\/Black\/Yellow Fluo Large 8301825-9510-YL","description":"Youth SM3 Helmet - Radium - Matte Gray\/Black\/Yellow Fluo - Large\n\u003cp\u003eThe Alpinestars Youth SM3 Radium Helmet is designed for young off-road riders who need dependable impact protection, ventilation, comfort, and a secure fit. This large helmet features a lightweight thermo-injected shell made from an advanced impact-resistant thermoplastic polymer blend. Varying shell thicknesses help balance protection and weight, while the multi-density inner liner places the appropriate density in key areas to improve impact absorption.\u003c\/p\u003e\u003cp\u003eEngineered for modern riding conditions, the Youth SM3 uses low-friction surfaces on the inner and outer liner to help reduce the effects of oblique impacts. A low-friction coating on the primary EPS liner acts as a slip plane, helping reduce rotational acceleration forces. The visor release system is designed to release at a predetermined force to help reduce stress on the rider’s neck during an impact. The helmet also includes an Emergency Release System and removable cheek pads, allowing safer, easier cheek-pad removal while the helmet remains in place.\u003c\/p\u003e\u003cp\u003eVentilation is supported by 10 intake ports and 7 exhaust ports, with the visor designed to direct airflow into the helmet for improved heat transfer. The comfort liner uses recycled materials, while integrated hydration tube channels in the cheek pads add convenience during extended rides. A soft 1-inch chin strap improves comfort and safety, and stainless steel D-rings provide a secure, adjustable fit. The crown and cheek pads are available in different thicknesses as replacement parts, allowing the fit to be tailored to the rider. The Alpinestars Youth SM3 Radium is intended for youth off-road and powersports use and is supplied in matte gray, black, and yellow fluo. Manufacturer part number 8301825-9510-YL; vendor part number 8301825-9510-YL.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eShell: Thermo-injected, impact-resistant thermoplastic shell with a specialized polymer blend and variable thickness construction\u003c\/li\u003e\n\u003cli\u003eImpact protection: Multi-density liner uses the correct density in key areas for enhanced impact absorption and reduced weight\u003c\/li\u003e\n\u003cli\u003eOblique impact management: Low-friction inner and outer surfaces help reduce rotational acceleration forces\u003c\/li\u003e\n\u003cli\u003eFit: Large youth fit with replaceable crown and cheek pads available in different thicknesses\u003c\/li\u003e\n\u003cli\u003eVentilation: 10 intake ports and 7 exhaust ports support airflow and heat exchange\u003c\/li\u003e\n\u003cli\u003eVisor: Airflow-directing design with a release system calibrated to help reduce neck forces during an impact\u003c\/li\u003e\n\u003cli\u003eEmergency release: Removable cheek pads and Emergency Release System support safer helmet removal\u003c\/li\u003e\n\u003cli\u003eComfort: Recycled-material comfort liner, 1-inch soft textile chin strap, and 3D-contoured cheek-pad foam\u003c\/li\u003e\n\u003cli\u003eHydration: Integrated hydration tube channels in the cheek pads\u003c\/li\u003e\n\u003cli\u003eRetention: Stainless steel D-rings provide a secure fit\u003c\/li\u003e\n\u003cli\u003eColor: Matte gray, black, and yellow fluo\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars\u003c\/li\u003e\n\u003cli\u003eModel: Youth SM3 Radium\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 8301825-9510-YL\u003c\/li\u003e\n\u003cli\u003eVendor part number: 8301825-9510-YL\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564615106795,"sku":"01111643","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/4036169.png?v=1790783333"},{"product_id":"alpinestars-youth-sm3-radium-helmet-matte-gray-black-yellow-fluo-medium-8301825-9510-ym","title":"Alpinestars Youth SM3 Radium Helmet Matte Gray\/Black\/Yellow Fluo Medium 8301825-9510-YM","description":"Youth SM3 Helmet - Radium - Matte Gray\/Black\/Yellow Fluo - Medium\n\u003cp\u003eThe Alpinestars Youth SM3 Radium Helmet is designed for young off-road riders who need dependable impact protection, comfortable fit, and effective ventilation. Finished in Matte Gray, Black, and Yellow Fluo, this Medium helmet features a lightweight thermo-injected shell made from an advanced impact-resistant thermoplastic. The shell uses a specialized polymer blend with varying thicknesses to help balance strength and reduced weight.\u003c\/p\u003e\u003cp\u003eInside, the Alpinestars Youth SM3 uses a multiple-density EPS liner engineered to provide the appropriate level of impact absorption in key areas. Low-friction surfaces on the inner and outer helmet components are designed to help reduce rotational acceleration during certain oblique impacts. The visor release system is calibrated to release at a predetermined force, helping reduce forces transferred to the rider’s neck in an impact. Ten intake vents and seven exhaust ports promote airflow and heat exchange, while the visor helps direct air into the ventilation system.\u003c\/p\u003e\u003cp\u003eFit and convenience are supported by removable crown and cheek pads, allowing the helmet to be tailored with replacement padding in different thicknesses. The cheek pads include integrated hydration tube channels, and the Emergency Release System allows the pads to be removed safely while the helmet remains in place. A recycled-material comfort liner helps reduce environmental impact, while the soft 1-inch chin strap and stainless steel D-rings provide secure, comfortable retention. The 3D-contoured foam further improves rider comfort during extended use.\u003c\/p\u003e\u003cp\u003eThis Medium Alpinestars Youth SM3 helmet is supplied under manufacturer part number and vendor part number 8301825-9510-YM. It is intended for youth off-road motorcycle riding and should be selected according to the rider’s head measurement and the manufacturer’s sizing guidance.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLightweight Shell: Thermo-injected, impact-resistant thermoplastic shell uses a specialized polymer blend with varied thicknesses for strength and reduced weight.\u003c\/li\u003e\n\u003cli\u003eImpact Absorption: Multiple-density EPS liner places the appropriate density in key areas to improve impact absorption.\u003c\/li\u003e\n\u003cli\u003eRotational Impact Management: Low-friction inner and outer surfaces are designed to help reduce rotational acceleration during certain oblique impacts.\u003c\/li\u003e\n\u003cli\u003eVentilation: Ten intake vents and seven exhaust ports support airflow and heat transfer, with the visor directing air toward the ports.\u003c\/li\u003e\n\u003cli\u003eVisor Release System: Designed to release at a predetermined force to help reduce forces transferred to the rider’s neck during an impact.\u003c\/li\u003e\n\u003cli\u003eCustomizable Fit: Removable crown and cheek pads can be replaced with different thicknesses for a tailored fit.\u003c\/li\u003e\n\u003cli\u003eEmergency Release System: Removable cheek pads support safer and easier helmet removal after an incident.\u003c\/li\u003e\n\u003cli\u003eHydration Compatibility: Integrated hydration tube channels are built into the cheek pads for convenient use.\u003c\/li\u003e\n\u003cli\u003eComfort Liner: Recycled-material comfort liner helps reduce the product’s environmental impact.\u003c\/li\u003e\n\u003cli\u003eRetention: Soft 1-inch chin strap and stainless steel D-rings provide secure and comfortable fastening.\u003c\/li\u003e\n\u003cli\u003eColor: Matte Gray, Black, and Yellow Fluo.\u003c\/li\u003e\n\u003cli\u003eSize: Medium.\u003c\/li\u003e\n\u003cli\u003eModel: Youth SM3 Radium.\u003c\/li\u003e\n\u003cli\u003eBrand: Alpinestars.\u003c\/li\u003e\n\u003cli\u003eManufacturer and Vendor Part Number: 8301825-9510-YM.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564629590251,"sku":"01111642","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/4036167.png?v=1790783368"},{"product_id":"alpinestars-youth-sm3-radium-helmet-matte-gray-black-yellow-fluo-small-8301825-9510-ys","title":"Alpinestars Youth SM3 Radium Helmet Matte Gray\/Black\/Yellow Fluo Small 8301825-9510-YS","description":"Youth SM3 Helmet - Radium - Matte Gray\/Black\/Yellow Fluo - Small\n\u003cp\u003eThe Alpinestars Youth SM3 Radium Helmet is designed for young riders who need lightweight performance, dependable impact protection, and a secure, comfortable fit. This Small helmet features a thermo-injected shell made from an advanced impact-resistant thermoplastic polymer blend, with varying shell thicknesses engineered to balance protection and reduced weight. The Alpinestars Youth SM3 uses a multi-density inner liner that places the appropriate density in key areas to improve impact absorption while helping reduce overall helmet weight.\u003c\/p\u003e\u003cp\u003eEngineered for off-road riding, the helmet’s inner and outer surfaces help minimize the effects of oblique impacts. A low-friction coating on the main EPS liner creates a slip plane intended to reduce rotational acceleration forces during certain angled impacts. Ten air inlets and seven exhaust ports maximize ventilation and heat transfer, while the visor directs airflow into the helmet for improved cooling. The visor release system is designed to release at a predetermined force, helping reduce forces transmitted to the rider’s neck during an impact.\u003c\/p\u003e\u003cp\u003eFit and convenience are enhanced by adjustable crown and cheek pads, available separately in different thicknesses for personalized sizing. The comfort liner uses recycled materials, and integrated hydration tube channels in the cheek pads support practical race and trail use. A soft 25 mm textile chin strap, stainless steel D-rings, and 3D-contoured foam help provide a stable, comfortable fit. The Emergency Release System and removable cheek pads allow trained personnel to remove the cheek pads while the helmet remains in place. This Alpinestars Youth SM3 is finished in Radium Matte Gray, Black, and Yellow Fluo and is identified by manufacturer and vendor part number 8301825-9510-YS.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThermo-injected shell: Advanced impact-resistant thermoplastic polymer blend with varying thicknesses for a balance of protection and reduced weight\u003c\/li\u003e\n\u003cli\u003eLightweight construction: Technologically advanced outer shell helps reduce overall helmet weight\u003c\/li\u003e\n\u003cli\u003eMulti-density liner: Uses strategically selected foam densities to support impact absorption in key areas\u003c\/li\u003e\n\u003cli\u003eOblique-impact design: Inner and outer surfaces are engineered to help minimize oblique-impact effects\u003c\/li\u003e\n\u003cli\u003eLow-friction EPS coating: Creates a slip-plane effect intended to reduce rotational acceleration forces during certain angled impacts\u003c\/li\u003e\n\u003cli\u003eVentilation system: Ten intake vents and seven exhaust ports promote airflow and heat transfer\u003c\/li\u003e\n\u003cli\u003eAirflow visor: Directs air toward the helmet’s ventilation ports for improved cooling\u003c\/li\u003e\n\u003cli\u003eVisor release system: Releases the visor at a predetermined force to help reduce forces on the rider’s neck during an impact\u003c\/li\u003e\n\u003cli\u003eCustomizable fit: Crown and cheek pads can be tailored to the rider and are available separately in multiple thicknesses\u003c\/li\u003e\n\u003cli\u003eRecycled comfort liner: Uses recycled materials to help reduce the helmet’s environmental impact\u003c\/li\u003e\n\u003cli\u003eHydration tube channels: Integrated into the cheek pads for convenient hydration system routing\u003c\/li\u003e\n\u003cli\u003eEmergency Release System: Removable cheek pads support safer, easier helmet removal by trained personnel\u003c\/li\u003e\n\u003cli\u003eSecure retention: Soft 25 mm textile chin strap and stainless steel D-rings provide a stable fit\u003c\/li\u003e\n\u003cli\u003eYouth Small fit: Designed for young riders in a Small size\u003c\/li\u003e\n\u003cli\u003eBrand and part number: Alpinestars Youth SM3, manufacturer and vendor part number 8301825-9510-YS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564640501995,"sku":"01111641","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/4036168.png?v=1790783404"},{"product_id":"alpinestars-youth-sm3-radium-helmet-gloss-yellow-fluo-black-blue-medium-8301825-5017-ym","title":"Alpinestars Youth SM3 Radium Helmet Gloss Yellow Fluo\/Black\/Blue Medium 8301825-5017-YM","description":"Youth SM3 Helmet - Radium - Gloss Yellow Fluo\/Black\/Blue - Medium\n\u003cp\u003eThe Alpinestars Youth SM3 Radium Helmet is designed for young riders who need dependable impact protection, a secure fit, and effective ventilation during off-road riding. This medium helmet features a lightweight, impact-resistant thermoplastic shell made with a specialized polymer blend and varying shell thicknesses to balance protection and weight. The Alpinestars SM3 also uses a multiple-density EPS inner liner, positioning the appropriate density in key areas to improve impact absorption and help reduce overall helmet weight.\u003c\/p\u003e\u003cp\u003eEngineered for modern impact performance, the helmet’s inner and outer surfaces help minimize the effects of oblique impacts. A low-friction coating on the primary EPS liner creates a slip-plane effect intended to reduce rotational acceleration forces associated with certain angled impacts. The visor release system is designed to release at a predetermined force, helping reduce the load transferred to the rider’s neck during an impact. Ten intake vents and seven exhaust ports support high levels of airflow and heat exchange, while the visor helps direct air into the ventilation system for improved circulation.\u003c\/p\u003e\u003cp\u003eFit and comfort can be customized with replaceable crown and cheek pads available in different thicknesses. The recycled-material comfort liner helps reduce environmental impact, while integrated hydration tube channels in the cheek pads provide convenient routing for hydration systems. A 25-millimeter soft textile chin strap, stainless steel D-rings, and a secure retention system help maintain a stable fit. The Emergency Release System and removable cheek pads allow safer, easier removal while the helmet remains on the rider. The Alpinestars Youth SM3 Radium is finished in Gloss Yellow Fluo, Black, and Blue and is identified by manufacturer and vendor part number 8301825-5017-YM.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYouth Medium Fit: Designed for young riders requiring a secure and comfortable medium helmet fit\u003c\/li\u003e\n\u003cli\u003eRadium Colorway: Gloss Yellow Fluo, black, and blue finish for a distinctive off-road appearance\u003c\/li\u003e\n\u003cli\u003eThermoplastic Shell: Lightweight impact-resistant outer shell uses a specialized polymer blend with varied thicknesses\u003c\/li\u003e\n\u003cli\u003eMultiple-Density EPS Liner: Uses targeted liner densities to support impact absorption and reduce overall weight\u003c\/li\u003e\n\u003cli\u003eOblique Impact Design: Inner and outer surfaces are engineered to help minimize the effects of angled impacts\u003c\/li\u003e\n\u003cli\u003eLow-Friction EPS Coating: Slip-plane layer is designed to reduce rotational acceleration forces from certain oblique impacts\u003c\/li\u003e\n\u003cli\u003eVentilation System: Ten intake vents and seven exhaust ports promote airflow and heat exchange\u003c\/li\u003e\n\u003cli\u003eVisor Release System: Predetermined-release design helps reduce forces transferred to the rider’s neck during an impact\u003c\/li\u003e\n\u003cli\u003eAdjustable Interior Fit: Replaceable crown and cheek pads are available in different thicknesses for personalized fit\u003c\/li\u003e\n\u003cli\u003eHydration Tube Channels: Integrated routing channels in the cheek pads support convenient hydration system use\u003c\/li\u003e\n\u003cli\u003eEmergency Release System: Removable cheek pads allow easier and safer helmet removal while the helmet is worn\u003c\/li\u003e\n\u003cli\u003eSecure Retention: Soft 25-millimeter textile chin strap and stainless steel D-rings provide a dependable fit\u003c\/li\u003e\n\u003cli\u003eManufacturer: Alpinestars\u003c\/li\u003e\n\u003cli\u003eVendor Part Number: 8301825-5017-YM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564653314283,"sku":"01111639","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/4036161.png?v=1790783437"},{"product_id":"alpinestars-youth-sm3-radium-helmet-gloss-yellow-fluo-black-blue-small-8301825-5017-ys","title":"Alpinestars Youth SM3 Radium Helmet Gloss Yellow Fluo\/Black\/Blue Small 8301825-5017-YS","description":"Youth SM3 Helmet - Radium - Gloss Yellow Fluo\/Black\/Blue - Small\n\u003cp\u003eThe Alpinestars Youth SM3 Radium Helmet is engineered for young riders who need dependable off-road protection, a comfortable fit, and effective ventilation. This small helmet features a lightweight, impact-resistant thermoplastic outer shell made with a thermo-injected polymer blend. Varying shell thicknesses are designed to provide an effective balance of impact protection and reduced weight. The Alpinestars Youth SM3 uses a multiple-density inner liner to place the appropriate density in key areas for improved impact absorption.\u003c\/p\u003e\u003cp\u003eDesigned to help manage the forces associated with oblique impacts, the helmet incorporates engineered inner and outer surfaces along with a low-friction coating on the main EPS liner. This coating acts as a slip plane to help reduce rotational acceleration forces during certain angled impacts. The visor release system is designed to release at a predetermined force, helping reduce forces transmitted to the rider’s neck during an impact. Ten intake vents and seven exhaust ports promote airflow and heat exchange, while the visor directs air toward the ventilation channels for enhanced cooling.\u003c\/p\u003e\u003cp\u003eFitment can be customized with replaceable crown and cheek pads available in different thicknesses. The comfort liner uses recycled materials, and integrated hydration tube channels in the cheek pads help keep hydration systems organized. A soft textile chin strap provides secure, comfortable retention, while stainless steel D-rings help maintain a dependable fit. The Emergency Release System and removable cheek pads allow trained responders to remove the cheek pads while the helmet remains in place. The Alpinestars Youth SM3 Radium is finished in Gloss Yellow Fluo, Black, and Blue and is identified by manufacturer and vendor part number 8301825-5017-YS.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLightweight thermoplastic shell: Thermo-injected polymer construction with engineered thickness variation for impact protection and reduced weight\u003c\/li\u003e\n\u003cli\u003eMultiple-density EPS liner: Uses targeted densities to improve impact absorption and help minimize overall weight\u003c\/li\u003e\n\u003cli\u003eOblique-impact management: Engineered surfaces and a low-friction EPS coating help reduce rotational acceleration forces\u003c\/li\u003e\n\u003cli\u003eVentilation system: Ten intake vents and seven exhaust ports support airflow and heat transfer\u003c\/li\u003e\n\u003cli\u003eVisor release system: Releases at a predetermined force to help reduce forces on the rider’s neck during an impact\u003c\/li\u003e\n\u003cli\u003eCustomizable fit: Replaceable crown and cheek pads are available in different thicknesses\u003c\/li\u003e\n\u003cli\u003eEmergency Release System: Removable cheek pads support safer helmet removal by trained responders\u003c\/li\u003e\n\u003cli\u003eHydration tube channels: Integrated into the cheek pads for convenient hydration-system routing\u003c\/li\u003e\n\u003cli\u003eSecure retention: Soft textile chin strap and stainless steel D-rings provide comfortable, dependable fastening\u003c\/li\u003e\n\u003cli\u003eRecycled comfort liner: Uses recycled materials to help reduce environmental impact\u003c\/li\u003e\n\u003cli\u003eFitment: Designed for youth off-road riders requiring a small-size helmet\u003c\/li\u003e\n\u003cli\u003eBrand and part number: Alpinestars Youth SM3 Radium, manufacturer and vendor part number 8301825-5017-YS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564663832811,"sku":"01111638","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/4036158.png?v=1790783467"},{"product_id":"alpinestars-youth-sm3-wurx-helmet-gloss-black-yellow-fluo-blue-red-medium-8302025-1574-ym","title":"Alpinestars Youth SM3 Wurx Helmet Gloss Black\/Yellow Fluo\/Blue\/Red Medium 8302025-1574-YM","description":"Youth SM3 Helmet - Wurx - Gloss Black\/Yellow Fluo\/Blue\/Red Medium\n\u003cp\u003eThe Alpinestars Youth SM3 Wurx Helmet is designed for young off-road riders who need lightweight protection, adjustable comfort, and effective ventilation. This medium-size helmet features a thermo-injected shell made from an advanced impact-resistant thermoplastic with a specialized polymer blend and strategically varied thickness. The result is a balanced combination of impact protection and reduced weight for demanding riding conditions. The Alpinestars Youth SM3 helmet is finished in Gloss Black, Yellow Fluo, Blue, and Red and is identified by manufacturer and vendor part number 8302025-1574-YM.\u003c\/p\u003e\u003cp\u003eA multiple-density EPS liner places the appropriate density in key impact zones to support energy absorption while helping maintain a lightweight design. The inner and outer surfaces are engineered to help minimize the effects of oblique impacts, while a low-friction coating on the main EPS liner helps reduce rotational acceleration forces by creating a slip-plane effect. Ten intake vents and seven exhaust ports maximize airflow and heat transfer, with the visor directing air toward the ventilation channels for improved cooling during off-road use.\u003c\/p\u003e\u003cp\u003eThe helmet’s fit can be tailored with replaceable crown and cheek pads available in different thicknesses. Integrated hydration tube channels in the cheek pads add convenience, while the recycled-material comfort liner supports a lower-impact construction approach. A 25 mm soft textile chin strap, stainless-steel D-rings, and a secure retention system help provide a comfortable, dependable fit. The visor release system is designed to release at a predetermined force to help reduce neck loading during an impact. An Emergency Release System and removable cheek pads allow trained responders to remove the cheek pads while the helmet remains in place. The Alpinestars Youth SM3 Wurx is intended for youth riders and should be selected according to the manufacturer’s sizing and fit guidance.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYouth medium fit for young off-road riders\u003c\/li\u003e\n\u003cli\u003eAlpinestars Youth SM3 Wurx model\u003c\/li\u003e\n\u003cli\u003eManufacturer and vendor part number: 8302025-1574-YM\u003c\/li\u003e\n\u003cli\u003eGloss Black, Yellow Fluo, Blue, and Red color scheme\u003c\/li\u003e\n\u003cli\u003eThermo-injected impact-resistant thermoplastic shell with a specialized polymer blend\u003c\/li\u003e\n\u003cli\u003eMultiple-density EPS liner for targeted impact absorption and reduced weight\u003c\/li\u003e\n\u003cli\u003eLow-friction EPS liner coating helps reduce rotational acceleration during certain oblique impacts\u003c\/li\u003e\n\u003cli\u003eTen intake vents and seven exhaust ports for enhanced airflow\u003c\/li\u003e\n\u003cli\u003eVisor directs air into the ventilation ports\u003c\/li\u003e\n\u003cli\u003eVisor release system helps reduce neck forces during an impact\u003c\/li\u003e\n\u003cli\u003eReplaceable crown and cheek pads in different thicknesses for personalized fit\u003c\/li\u003e\n\u003cli\u003eRecycled-material comfort liner\u003c\/li\u003e\n\u003cli\u003eIntegrated hydration tube channels in the cheek pads\u003c\/li\u003e\n\u003cli\u003e25 mm soft textile chin strap\u003c\/li\u003e\n\u003cli\u003eEmergency Release System with removable cheek pads\u003c\/li\u003e\n\u003cli\u003e3D-contoured cheek-pad foam for rider comfort\u003c\/li\u003e\n\u003cli\u003eStainless-steel D-rings for secure retention\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALPINESTARS","offers":[{"title":"Default Title","offer_id":67564671402219,"sku":"01111636","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/3882\/9547\/files\/4036435.png?v=1790783504"}],"url":"https:\/\/ctracingservices.com\/collections\/alpinestars-sm3-helmets.oembed?page=2","provider":"Cascade Tire \u0026 Racing Services","version":"1.0","type":"link"}